dominic/Arduino-Makefile
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
Arduino-Makefile/Sam.mk

454 lines
16 KiB
Makefile
Raw Normal View History

SAMD Cortex M0 device support (Zero, MKR1000, etc) Compilation improvements by adding variant as other obj but not working on device Arduino Zero devices with OpenOCD working Created ARM_TOOLS_DIR and define arm toolchain executables in Sam.mk Check avr-gcc on last AVR_TOOLS_DIR detect and indenting formatting GDB debugging and programming added Documentation updates and define ARDMK_VENDOR rather than include Sam.mk Expand all parse_boards when defined rather than when used Trim extra defines regex working on both macOS and Linux but need better fix Print USB ids and added debug usage to readme Add note on Arduino package dir and made board.txt work Do ARM ARDUINO_ARCH define in Arduino.mk] Add MZeroBlink to non-testable examples for now Remove \B from extra defines grep Add ARDUINO_PACKAGE_DIR for board support files Fix a typo in the README Fix typo in arduino-mk-vars.md Prevent re-including Arduino.mk from Sam.mk when make restarts for upload Add catrina to ARD_REST_OPTS if/else Remove realpath in Sam.mk for cygwin compatability SAMD bootloader support in ard-reset using --zero Enters bootloader using open/close of port at 1200 BAUD, then polls the attached devices for new port enumerating (bootloader). This is how the Arduino IDE operates Bossa support for Zero, MKR1000 etc Re-word Arm README section after Native USB development Reset for zero refactored like IDE Zero bootloader reset tested on macOS and comments added Re-word ARM bootloader and remove imports from testing Patch changes ARDMK_VENDOR->ARCHITECHTURE, show_config_vars, ignore CORE_VER if emtpy Common.mk header guard, openocd/bossac avoid separator, typos Documentation update for patch changes Move ARM tools to Sam.mk and auto-detect include Correct accidental commit of Blink Makefile change Lib fix with alternative core and documentation Append zero to ARD_RESET_OPTS rather than set Prioritise package ARM upload tools over path installed Add note in README on ARM tools versions Move openocd variant config script flag to OPTS
2018-01-02 18:35:47 +01:00
########################################################################
#
# Support for Arduino Atmel SAM boards (sam and samd)
#
# You must install a SAM board hardware support package (such as Arduino Zero)
# to use this, then define ARDUINO_PACKAGE_DIR as the path to the root
# directory containing the support package.
#
# 2018 John Whittington @j_whittington
#
########################################################################
arduino_output =
# When output is not suppressed and we're in the top-level makefile,
# running for the first time (i.e., not after a restart after
# regenerating the dependency file), then output the configuration.
ifndef ARDUINO_QUIET
ifeq ($(MAKE_RESTARTS),)
ifeq ($(MAKELEVEL),0)
arduino_output = $(info $(1))
endif
endif
endif
ifndef ARDMK_DIR
ARDMK_DIR := $(realpath $(dir $(realpath $(lastword $(MAKEFILE_LIST)))))
endif
# include Common.mk now we know where it is
ifndef COMMON_INCLUDED
include $(ARDMK_DIR)/Common.mk
endif
ifndef ARDUINO_PACKAGE_DIR
# attempt to find based on Linux, macOS and Windows default
ARDUINO_PACKAGE_DIR := $(firstword \
$(call dir_if_exists,$(HOME)/.arduino15/packages) \
$(call dir_if_exists,$(ARDUINO_DIR)/packages) \
$(call dir_if_exists,$(HOME)/Library/Arduino15/packages) \
$(call dir_if_exists,$(USERPROFILE)/AppData/Local/Arduino15/packages) )
$(call show_config_variable,ARDUINO_PACKAGE_DIR,[AUTODETECTED],(from DEFAULT))
else
$(call show_config_variable,ARDUINO_PACKAGE_DIR,[USER])
endif
ifndef ARDMK_VENDOR
ARDMK_VENDOR := arduino
endif
ifndef ARCHITECTURE
ARCHITECTURE := samd
endif
ifndef CORE_VER
CORE_VER := $(wildcard $(ARDUINO_PACKAGE_DIR)/$(ARDMK_VENDOR)/hardware/$(ARCHITECTURE)/1.*)
Support for Arduino Due added Update HISTORY.md Add avr core emulation to C sources
2018-06-12 14:59:58 +02:00
ifneq ($(CORE_VER),)
SAMD Cortex M0 device support (Zero, MKR1000, etc) Compilation improvements by adding variant as other obj but not working on device Arduino Zero devices with OpenOCD working Created ARM_TOOLS_DIR and define arm toolchain executables in Sam.mk Check avr-gcc on last AVR_TOOLS_DIR detect and indenting formatting GDB debugging and programming added Documentation updates and define ARDMK_VENDOR rather than include Sam.mk Expand all parse_boards when defined rather than when used Trim extra defines regex working on both macOS and Linux but need better fix Print USB ids and added debug usage to readme Add note on Arduino package dir and made board.txt work Do ARM ARDUINO_ARCH define in Arduino.mk] Add MZeroBlink to non-testable examples for now Remove \B from extra defines grep Add ARDUINO_PACKAGE_DIR for board support files Fix a typo in the README Fix typo in arduino-mk-vars.md Prevent re-including Arduino.mk from Sam.mk when make restarts for upload Add catrina to ARD_REST_OPTS if/else Remove realpath in Sam.mk for cygwin compatability SAMD bootloader support in ard-reset using --zero Enters bootloader using open/close of port at 1200 BAUD, then polls the attached devices for new port enumerating (bootloader). This is how the Arduino IDE operates Bossa support for Zero, MKR1000 etc Re-word Arm README section after Native USB development Reset for zero refactored like IDE Zero bootloader reset tested on macOS and comments added Re-word ARM bootloader and remove imports from testing Patch changes ARDMK_VENDOR->ARCHITECHTURE, show_config_vars, ignore CORE_VER if emtpy Common.mk header guard, openocd/bossac avoid separator, typos Documentation update for patch changes Move ARM tools to Sam.mk and auto-detect include Correct accidental commit of Blink Makefile change Lib fix with alternative core and documentation Append zero to ARD_RESET_OPTS rather than set Prioritise package ARM upload tools over path installed Add note in README on ARM tools versions Move openocd variant config script flag to OPTS
2018-01-02 18:35:47 +01:00
CORE_VER := $(shell basename $(CORE_VER))
$(call show_config_variable,CORE_VER,[AUTODETECTED],(from ARDUINO_PACKAGE_DIR))
endif
else
$(call show_config_variable,CORE_VER,[USER])
endif
ifndef CMSIS_VER
Support for Arduino Due added Update HISTORY.md Add avr core emulation to C sources
2018-06-12 14:59:58 +02:00
CMSIS_VER := $(wildcard $(ARDUINO_PACKAGE_DIR)/$(ARDMK_VENDOR)/tools/CMSIS/4.*)
ifneq ($(CMSIS_VER),)
CMSIS_VER := $(shell basename $(CMSIS_VER))
$(call show_config_variable,CMSIS_VER,[AUTODETECTED],(from ARDUINO_PACKAGE_DIR))
endif
SAMD Cortex M0 device support (Zero, MKR1000, etc) Compilation improvements by adding variant as other obj but not working on device Arduino Zero devices with OpenOCD working Created ARM_TOOLS_DIR and define arm toolchain executables in Sam.mk Check avr-gcc on last AVR_TOOLS_DIR detect and indenting formatting GDB debugging and programming added Documentation updates and define ARDMK_VENDOR rather than include Sam.mk Expand all parse_boards when defined rather than when used Trim extra defines regex working on both macOS and Linux but need better fix Print USB ids and added debug usage to readme Add note on Arduino package dir and made board.txt work Do ARM ARDUINO_ARCH define in Arduino.mk] Add MZeroBlink to non-testable examples for now Remove \B from extra defines grep Add ARDUINO_PACKAGE_DIR for board support files Fix a typo in the README Fix typo in arduino-mk-vars.md Prevent re-including Arduino.mk from Sam.mk when make restarts for upload Add catrina to ARD_REST_OPTS if/else Remove realpath in Sam.mk for cygwin compatability SAMD bootloader support in ard-reset using --zero Enters bootloader using open/close of port at 1200 BAUD, then polls the attached devices for new port enumerating (bootloader). This is how the Arduino IDE operates Bossa support for Zero, MKR1000 etc Re-word Arm README section after Native USB development Reset for zero refactored like IDE Zero bootloader reset tested on macOS and comments added Re-word ARM bootloader and remove imports from testing Patch changes ARDMK_VENDOR->ARCHITECHTURE, show_config_vars, ignore CORE_VER if emtpy Common.mk header guard, openocd/bossac avoid separator, typos Documentation update for patch changes Move ARM tools to Sam.mk and auto-detect include Correct accidental commit of Blink Makefile change Lib fix with alternative core and documentation Append zero to ARD_RESET_OPTS rather than set Prioritise package ARM upload tools over path installed Add note in README on ARM tools versions Move openocd variant config script flag to OPTS
2018-01-02 18:35:47 +01:00
else
$(call show_config_variable,CMSIS_VER,[USER])
endif
ifndef CMSIS_ATMEL_VER
Support for Arduino Due added Update HISTORY.md Add avr core emulation to C sources
2018-06-12 14:59:58 +02:00
CMSIS_ATMEL_VER := $(wildcard $(ARDUINO_PACKAGE_DIR)/$(ARDMK_VENDOR)/tools/CMSIS-Atmel/1.*)
ifneq ($(CMSIS_ATMEL_VER),)
CMSIS_ATMEL_VER := $(shell basename $(CMSIS_ATMEL_VER))
$(call show_config_variable,CMSIS_ATMEL_VER,[AUTODETECTED],(from ARDUINO_PACKAGE_DIR))
endif
SAMD Cortex M0 device support (Zero, MKR1000, etc) Compilation improvements by adding variant as other obj but not working on device Arduino Zero devices with OpenOCD working Created ARM_TOOLS_DIR and define arm toolchain executables in Sam.mk Check avr-gcc on last AVR_TOOLS_DIR detect and indenting formatting GDB debugging and programming added Documentation updates and define ARDMK_VENDOR rather than include Sam.mk Expand all parse_boards when defined rather than when used Trim extra defines regex working on both macOS and Linux but need better fix Print USB ids and added debug usage to readme Add note on Arduino package dir and made board.txt work Do ARM ARDUINO_ARCH define in Arduino.mk] Add MZeroBlink to non-testable examples for now Remove \B from extra defines grep Add ARDUINO_PACKAGE_DIR for board support files Fix a typo in the README Fix typo in arduino-mk-vars.md Prevent re-including Arduino.mk from Sam.mk when make restarts for upload Add catrina to ARD_REST_OPTS if/else Remove realpath in Sam.mk for cygwin compatability SAMD bootloader support in ard-reset using --zero Enters bootloader using open/close of port at 1200 BAUD, then polls the attached devices for new port enumerating (bootloader). This is how the Arduino IDE operates Bossa support for Zero, MKR1000 etc Re-word Arm README section after Native USB development Reset for zero refactored like IDE Zero bootloader reset tested on macOS and comments added Re-word ARM bootloader and remove imports from testing Patch changes ARDMK_VENDOR->ARCHITECHTURE, show_config_vars, ignore CORE_VER if emtpy Common.mk header guard, openocd/bossac avoid separator, typos Documentation update for patch changes Move ARM tools to Sam.mk and auto-detect include Correct accidental commit of Blink Makefile change Lib fix with alternative core and documentation Append zero to ARD_RESET_OPTS rather than set Prioritise package ARM upload tools over path installed Add note in README on ARM tools versions Move openocd variant config script flag to OPTS
2018-01-02 18:35:47 +01:00
else
$(call show_config_variable,CMSIS_ATMEL_VER,[USER])
endif
ifndef CMSIS_DIR
Support for Arduino Due added Update HISTORY.md Add avr core emulation to C sources
2018-06-12 14:59:58 +02:00
ifeq ($(findstring samd, $(strip $(ARCHITECTURE))), samd)
CMSIS_DIR := $(ARDUINO_PACKAGE_DIR)/$(ARDMK_VENDOR)/tools/CMSIS/$(CMSIS_VER)/CMSIS
else
CMSIS_DIR = $(ALTERNATE_CORE_PATH)/system/CMSIS/CMSIS
endif
SAMD Cortex M0 device support (Zero, MKR1000, etc) Compilation improvements by adding variant as other obj but not working on device Arduino Zero devices with OpenOCD working Created ARM_TOOLS_DIR and define arm toolchain executables in Sam.mk Check avr-gcc on last AVR_TOOLS_DIR detect and indenting formatting GDB debugging and programming added Documentation updates and define ARDMK_VENDOR rather than include Sam.mk Expand all parse_boards when defined rather than when used Trim extra defines regex working on both macOS and Linux but need better fix Print USB ids and added debug usage to readme Add note on Arduino package dir and made board.txt work Do ARM ARDUINO_ARCH define in Arduino.mk] Add MZeroBlink to non-testable examples for now Remove \B from extra defines grep Add ARDUINO_PACKAGE_DIR for board support files Fix a typo in the README Fix typo in arduino-mk-vars.md Prevent re-including Arduino.mk from Sam.mk when make restarts for upload Add catrina to ARD_REST_OPTS if/else Remove realpath in Sam.mk for cygwin compatability SAMD bootloader support in ard-reset using --zero Enters bootloader using open/close of port at 1200 BAUD, then polls the attached devices for new port enumerating (bootloader). This is how the Arduino IDE operates Bossa support for Zero, MKR1000 etc Re-word Arm README section after Native USB development Reset for zero refactored like IDE Zero bootloader reset tested on macOS and comments added Re-word ARM bootloader and remove imports from testing Patch changes ARDMK_VENDOR->ARCHITECHTURE, show_config_vars, ignore CORE_VER if emtpy Common.mk header guard, openocd/bossac avoid separator, typos Documentation update for patch changes Move ARM tools to Sam.mk and auto-detect include Correct accidental commit of Blink Makefile change Lib fix with alternative core and documentation Append zero to ARD_RESET_OPTS rather than set Prioritise package ARM upload tools over path installed Add note in README on ARM tools versions Move openocd variant config script flag to OPTS
2018-01-02 18:35:47 +01:00
$(call show_config_variable,CMSIS_DIR,[AUTODETECTED],(from ARDUINO_PACKAGE_DIR))
else
$(call show_config_variable,CMSIS_DIR,[USER])
endif
ifndef CMSIS_ATMEL_DIR
Support for Arduino Due added Update HISTORY.md Add avr core emulation to C sources
2018-06-12 14:59:58 +02:00
ifeq ($(findstring samd, $(strip $(ARCHITECTURE))), samd)
CMSIS_ATMEL_DIR := $(ARDUINO_PACKAGE_DIR)/$(ARDMK_VENDOR)/tools/CMSIS-Atmel/$(CMSIS_ATMEL_VER)/CMSIS
else
CMSIS_ATMEL_DIR = $(ALTERNATE_CORE_PATH)/system/CMSIS
endif
SAMD Cortex M0 device support (Zero, MKR1000, etc) Compilation improvements by adding variant as other obj but not working on device Arduino Zero devices with OpenOCD working Created ARM_TOOLS_DIR and define arm toolchain executables in Sam.mk Check avr-gcc on last AVR_TOOLS_DIR detect and indenting formatting GDB debugging and programming added Documentation updates and define ARDMK_VENDOR rather than include Sam.mk Expand all parse_boards when defined rather than when used Trim extra defines regex working on both macOS and Linux but need better fix Print USB ids and added debug usage to readme Add note on Arduino package dir and made board.txt work Do ARM ARDUINO_ARCH define in Arduino.mk] Add MZeroBlink to non-testable examples for now Remove \B from extra defines grep Add ARDUINO_PACKAGE_DIR for board support files Fix a typo in the README Fix typo in arduino-mk-vars.md Prevent re-including Arduino.mk from Sam.mk when make restarts for upload Add catrina to ARD_REST_OPTS if/else Remove realpath in Sam.mk for cygwin compatability SAMD bootloader support in ard-reset using --zero Enters bootloader using open/close of port at 1200 BAUD, then polls the attached devices for new port enumerating (bootloader). This is how the Arduino IDE operates Bossa support for Zero, MKR1000 etc Re-word Arm README section after Native USB development Reset for zero refactored like IDE Zero bootloader reset tested on macOS and comments added Re-word ARM bootloader and remove imports from testing Patch changes ARDMK_VENDOR->ARCHITECHTURE, show_config_vars, ignore CORE_VER if emtpy Common.mk header guard, openocd/bossac avoid separator, typos Documentation update for patch changes Move ARM tools to Sam.mk and auto-detect include Correct accidental commit of Blink Makefile change Lib fix with alternative core and documentation Append zero to ARD_RESET_OPTS rather than set Prioritise package ARM upload tools over path installed Add note in README on ARM tools versions Move openocd variant config script flag to OPTS
2018-01-02 18:35:47 +01:00
$(call show_config_variable,CMSIS_ATMEL_DIR,[AUTODETECTED],(from ARDUINO_PACKAGE_DIR))
else
$(call show_config_variable,CMSIS_ATMEL_DIR,[USER])
endif
# Arduino Settings (will get shown in Arduino.mk as computed)
ifndef ALTERNATE_CORE_PATH
ifdef CORE_VER
ALTERNATE_CORE_PATH = $(ARDUINO_PACKAGE_DIR)/$(ARDMK_VENDOR)/hardware/$(ARCHITECTURE)/$(CORE_VER)
else
ALTERNATE_CORE_PATH = $(ARDUINO_PACKAGE_DIR)/$(ARDMK_VENDOR)/hardware/$(ARCHITECTURE)
endif
endif
ifndef ARDUINO_CORE_PATH
ARDUINO_CORE_PATH = $(ALTERNATE_CORE_PATH)/cores/arduino
endif
Fixed typo in var name BOARDS_TXT in Sam.mk
2019-03-02 17:01:25 +01:00
ifndef BOARDS_TXT
SAMD Cortex M0 device support (Zero, MKR1000, etc) Compilation improvements by adding variant as other obj but not working on device Arduino Zero devices with OpenOCD working Created ARM_TOOLS_DIR and define arm toolchain executables in Sam.mk Check avr-gcc on last AVR_TOOLS_DIR detect and indenting formatting GDB debugging and programming added Documentation updates and define ARDMK_VENDOR rather than include Sam.mk Expand all parse_boards when defined rather than when used Trim extra defines regex working on both macOS and Linux but need better fix Print USB ids and added debug usage to readme Add note on Arduino package dir and made board.txt work Do ARM ARDUINO_ARCH define in Arduino.mk] Add MZeroBlink to non-testable examples for now Remove \B from extra defines grep Add ARDUINO_PACKAGE_DIR for board support files Fix a typo in the README Fix typo in arduino-mk-vars.md Prevent re-including Arduino.mk from Sam.mk when make restarts for upload Add catrina to ARD_REST_OPTS if/else Remove realpath in Sam.mk for cygwin compatability SAMD bootloader support in ard-reset using --zero Enters bootloader using open/close of port at 1200 BAUD, then polls the attached devices for new port enumerating (bootloader). This is how the Arduino IDE operates Bossa support for Zero, MKR1000 etc Re-word Arm README section after Native USB development Reset for zero refactored like IDE Zero bootloader reset tested on macOS and comments added Re-word ARM bootloader and remove imports from testing Patch changes ARDMK_VENDOR->ARCHITECHTURE, show_config_vars, ignore CORE_VER if emtpy Common.mk header guard, openocd/bossac avoid separator, typos Documentation update for patch changes Move ARM tools to Sam.mk and auto-detect include Correct accidental commit of Blink Makefile change Lib fix with alternative core and documentation Append zero to ARD_RESET_OPTS rather than set Prioritise package ARM upload tools over path installed Add note in README on ARM tools versions Move openocd variant config script flag to OPTS
2018-01-02 18:35:47 +01:00
BOARDS_TXT = $(ALTERNATE_CORE_PATH)/boards.txt
endif
# Check boards file exists before continuing as parsing non-existant file can create problems
ifneq ($(findstring boards.txt, $(wildcard $(ALTERNATE_CORE_PATH)/*.txt)), boards.txt)
echo $(error $(CORE_VER) Cannot find boards file $(BOARDS_TXT). Check ARDUINO_PACKAGE_DIR path: $(ARDUINO_PACKAGE_DIR) and board support installed)
endif
# add CMSIS includes
CPPFLAGS += -I$(CMSIS_DIR)/Include/
CPPFLAGS += -I$(CMSIS_ATMEL_DIR)/Device/ATMEL
# path for Cortex library
LIB_PATH = $(CMSIS_DIR)/Lib/GCC
BOOTLOADER_PARENT = $(ALTERNATE_CORE_PATH)/bootloaders
ifndef VARIANT
VARIANT := $(call PARSE_BOARD,$(BOARD_TAG),menu.(chip|cpu).$(BOARD_SUB).build.variant)
ifndef VARIANT
VARIANT := $(call PARSE_BOARD,$(BOARD_TAG),build.variant)
endif
endif
# grab any sources in the variant core path (variant.cpp defines pin/port mapping on SAM devices)
Support for Arduino Due added Update HISTORY.md Add avr core emulation to C sources
2018-06-12 14:59:58 +02:00
ifndef SAM_CORE_PATH
SAM_CORE_PATH := $(ALTERNATE_CORE_PATH)/variants/$(VARIANT)
endif
SAM_CORE_C_SRCS := $(wildcard $(SAM_CORE_PATH)/*.c)
SAM_CORE_CPP_SRCS := $(wildcard $(SAM_CORE_PATH)/*.cpp)
SAM_CORE_S_SRCS := $(wildcard $(SAM_CORE_PATH)/*.S)
# due/sam specific paths hard define chip type for SystemInit function in system_CHIP.c as not included in core like samd
ifeq ($(findstring arduino_due, $(strip $(VARIANT))), arduino_due)
ifndef SAM_SYSTEM_PATH
SAM_SYSTEM_PATH := $(CMSIS_ATMEL_DIR)/Device/ATMEL/sam3xa
endif
ifndef SAM_LIBSAM_PATH
SAM_LIBSAM_PATH := $(ALTERNATE_CORE_PATH)/system/libsam
endif
CPPFLAGS += -I$(SAM_SYSTEM_PATH)/include
CPPFLAGS += -I$(SAM_LIBSAM_PATH)
CPPFLAGS += -I$(SAM_LIBSAM_PATH)/include
SAM_CORE_C_SRCS += $(wildcard $(SAM_LIBSAM_PATH)/source/*.c)
SAM_CORE_C_SRCS += $(wildcard $(SAM_SYSTEM_PATH)/source/*.c)
endif
SAMD Cortex M0 device support (Zero, MKR1000, etc) Compilation improvements by adding variant as other obj but not working on device Arduino Zero devices with OpenOCD working Created ARM_TOOLS_DIR and define arm toolchain executables in Sam.mk Check avr-gcc on last AVR_TOOLS_DIR detect and indenting formatting GDB debugging and programming added Documentation updates and define ARDMK_VENDOR rather than include Sam.mk Expand all parse_boards when defined rather than when used Trim extra defines regex working on both macOS and Linux but need better fix Print USB ids and added debug usage to readme Add note on Arduino package dir and made board.txt work Do ARM ARDUINO_ARCH define in Arduino.mk] Add MZeroBlink to non-testable examples for now Remove \B from extra defines grep Add ARDUINO_PACKAGE_DIR for board support files Fix a typo in the README Fix typo in arduino-mk-vars.md Prevent re-including Arduino.mk from Sam.mk when make restarts for upload Add catrina to ARD_REST_OPTS if/else Remove realpath in Sam.mk for cygwin compatability SAMD bootloader support in ard-reset using --zero Enters bootloader using open/close of port at 1200 BAUD, then polls the attached devices for new port enumerating (bootloader). This is how the Arduino IDE operates Bossa support for Zero, MKR1000 etc Re-word Arm README section after Native USB development Reset for zero refactored like IDE Zero bootloader reset tested on macOS and comments added Re-word ARM bootloader and remove imports from testing Patch changes ARDMK_VENDOR->ARCHITECHTURE, show_config_vars, ignore CORE_VER if emtpy Common.mk header guard, openocd/bossac avoid separator, typos Documentation update for patch changes Move ARM tools to Sam.mk and auto-detect include Correct accidental commit of Blink Makefile change Lib fix with alternative core and documentation Append zero to ARD_RESET_OPTS rather than set Prioritise package ARM upload tools over path installed Add note in README on ARM tools versions Move openocd variant config script flag to OPTS
2018-01-02 18:35:47 +01:00
# define plaform lib dir from Arduino ARM support
ifndef ARDUINO_PLATFORM_LIB_PATH
ARDUINO_PLATFORM_LIB_PATH := $(ALTERNATE_CORE_PATH)/libraries
$(call show_config_variable,ARDUINO_PLATFORM_LIB_PATH,[COMPUTED],(from ARDUINO_PACKAGE_DIR))
endif
########################################################################
# command names
Added the TOOL_PREFIX variable for setting up the executable tools. Currently three different tool chains seem to be used: * avr-* * pic32-* * arm-none-eabi-* These all get set up independently. This patch centralizes the definitions of the executable tools and does it generically, by means of the newly introduced TOOL_PREFIX variable. Setting up a tool chain is now simply a matter of defining the TOOL_PREFIX variable. For the currently supported tool chains it gets set to avr, pic32 or arm-none-eabi. Arbitrary tool chains can now easily be set up, by the TOOL_PREFIX variable. Although the use of the OVERRIDE_EXECUTABLES variable is now almost not justifiable, it was left as-is, in order to assure backwards compatibility.
2018-09-14 16:14:14 +02:00
TOOL_PREFIX = arm-none-eabi
SAMD Cortex M0 device support (Zero, MKR1000, etc) Compilation improvements by adding variant as other obj but not working on device Arduino Zero devices with OpenOCD working Created ARM_TOOLS_DIR and define arm toolchain executables in Sam.mk Check avr-gcc on last AVR_TOOLS_DIR detect and indenting formatting GDB debugging and programming added Documentation updates and define ARDMK_VENDOR rather than include Sam.mk Expand all parse_boards when defined rather than when used Trim extra defines regex working on both macOS and Linux but need better fix Print USB ids and added debug usage to readme Add note on Arduino package dir and made board.txt work Do ARM ARDUINO_ARCH define in Arduino.mk] Add MZeroBlink to non-testable examples for now Remove \B from extra defines grep Add ARDUINO_PACKAGE_DIR for board support files Fix a typo in the README Fix typo in arduino-mk-vars.md Prevent re-including Arduino.mk from Sam.mk when make restarts for upload Add catrina to ARD_REST_OPTS if/else Remove realpath in Sam.mk for cygwin compatability SAMD bootloader support in ard-reset using --zero Enters bootloader using open/close of port at 1200 BAUD, then polls the attached devices for new port enumerating (bootloader). This is how the Arduino IDE operates Bossa support for Zero, MKR1000 etc Re-word Arm README section after Native USB development Reset for zero refactored like IDE Zero bootloader reset tested on macOS and comments added Re-word ARM bootloader and remove imports from testing Patch changes ARDMK_VENDOR->ARCHITECHTURE, show_config_vars, ignore CORE_VER if emtpy Common.mk header guard, openocd/bossac avoid separator, typos Documentation update for patch changes Move ARM tools to Sam.mk and auto-detect include Correct accidental commit of Blink Makefile change Lib fix with alternative core and documentation Append zero to ARD_RESET_OPTS rather than set Prioritise package ARM upload tools over path installed Add note in README on ARM tools versions Move openocd variant config script flag to OPTS
2018-01-02 18:35:47 +01:00
ARM_TOOL_PATH detection, use latest version of tool if multiple found
2019-07-17 10:19:03 +02:00
# Use arm-toolchain from Arduino package install if exists and user has not defined global version
# if undefined, AVR_TOOLS_DIR will resolve in Arduino.mk as a last resort as Arduino now installs with arm-gcc
ifndef ARM_TOOLS_DIR
ifndef ARM_TOOLS_VER
ARM_TOOLS_VER := $(shell basename $(lastword $(wildcard $(ARDUINO_PACKAGE_DIR)/$(ARDMK_VENDOR)/tools/$(TOOL_PREFIX)-gcc/*)))
endif
ARM_TOOLS_DIR = $(ARDUINO_PACKAGE_DIR)/$(ARDMK_VENDOR)/tools/$(TOOL_PREFIX)-gcc/$(ARM_TOOLS_VER)
ifdef ARM_TOOLS_DIR
$(call show_config_variable,ARM_TOOLS_DIR,[COMPUTED],(from ARDUINO_PACKAGE_DIR))
endif
else
$(call show_config_variable,ARM_TOOLS_DIR,[USER])
endif
SAMD Cortex M0 device support (Zero, MKR1000, etc) Compilation improvements by adding variant as other obj but not working on device Arduino Zero devices with OpenOCD working Created ARM_TOOLS_DIR and define arm toolchain executables in Sam.mk Check avr-gcc on last AVR_TOOLS_DIR detect and indenting formatting GDB debugging and programming added Documentation updates and define ARDMK_VENDOR rather than include Sam.mk Expand all parse_boards when defined rather than when used Trim extra defines regex working on both macOS and Linux but need better fix Print USB ids and added debug usage to readme Add note on Arduino package dir and made board.txt work Do ARM ARDUINO_ARCH define in Arduino.mk] Add MZeroBlink to non-testable examples for now Remove \B from extra defines grep Add ARDUINO_PACKAGE_DIR for board support files Fix a typo in the README Fix typo in arduino-mk-vars.md Prevent re-including Arduino.mk from Sam.mk when make restarts for upload Add catrina to ARD_REST_OPTS if/else Remove realpath in Sam.mk for cygwin compatability SAMD bootloader support in ard-reset using --zero Enters bootloader using open/close of port at 1200 BAUD, then polls the attached devices for new port enumerating (bootloader). This is how the Arduino IDE operates Bossa support for Zero, MKR1000 etc Re-word Arm README section after Native USB development Reset for zero refactored like IDE Zero bootloader reset tested on macOS and comments added Re-word ARM bootloader and remove imports from testing Patch changes ARDMK_VENDOR->ARCHITECHTURE, show_config_vars, ignore CORE_VER if emtpy Common.mk header guard, openocd/bossac avoid separator, typos Documentation update for patch changes Move ARM tools to Sam.mk and auto-detect include Correct accidental commit of Blink Makefile change Lib fix with alternative core and documentation Append zero to ARD_RESET_OPTS rather than set Prioritise package ARM upload tools over path installed Add note in README on ARM tools versions Move openocd variant config script flag to OPTS
2018-01-02 18:35:47 +01:00
ifndef GDB_NAME
GDB_NAME := $(call PARSE_BOARD,$(BOARD_TAG),build.command.gdb)
ifndef GDB_NAME
Added the TOOL_PREFIX variable for setting up the executable tools. Currently three different tool chains seem to be used: * avr-* * pic32-* * arm-none-eabi-* These all get set up independently. This patch centralizes the definitions of the executable tools and does it generically, by means of the newly introduced TOOL_PREFIX variable. Setting up a tool chain is now simply a matter of defining the TOOL_PREFIX variable. For the currently supported tool chains it gets set to avr, pic32 or arm-none-eabi. Arbitrary tool chains can now easily be set up, by the TOOL_PREFIX variable. Although the use of the OVERRIDE_EXECUTABLES variable is now almost not justifiable, it was left as-is, in order to assure backwards compatibility.
2018-09-14 16:14:14 +02:00
GDB_NAME := $(TOOL_PREFIX)-gdb
SAMD Cortex M0 device support (Zero, MKR1000, etc) Compilation improvements by adding variant as other obj but not working on device Arduino Zero devices with OpenOCD working Created ARM_TOOLS_DIR and define arm toolchain executables in Sam.mk Check avr-gcc on last AVR_TOOLS_DIR detect and indenting formatting GDB debugging and programming added Documentation updates and define ARDMK_VENDOR rather than include Sam.mk Expand all parse_boards when defined rather than when used Trim extra defines regex working on both macOS and Linux but need better fix Print USB ids and added debug usage to readme Add note on Arduino package dir and made board.txt work Do ARM ARDUINO_ARCH define in Arduino.mk] Add MZeroBlink to non-testable examples for now Remove \B from extra defines grep Add ARDUINO_PACKAGE_DIR for board support files Fix a typo in the README Fix typo in arduino-mk-vars.md Prevent re-including Arduino.mk from Sam.mk when make restarts for upload Add catrina to ARD_REST_OPTS if/else Remove realpath in Sam.mk for cygwin compatability SAMD bootloader support in ard-reset using --zero Enters bootloader using open/close of port at 1200 BAUD, then polls the attached devices for new port enumerating (bootloader). This is how the Arduino IDE operates Bossa support for Zero, MKR1000 etc Re-word Arm README section after Native USB development Reset for zero refactored like IDE Zero bootloader reset tested on macOS and comments added Re-word ARM bootloader and remove imports from testing Patch changes ARDMK_VENDOR->ARCHITECHTURE, show_config_vars, ignore CORE_VER if emtpy Common.mk header guard, openocd/bossac avoid separator, typos Documentation update for patch changes Move ARM tools to Sam.mk and auto-detect include Correct accidental commit of Blink Makefile change Lib fix with alternative core and documentation Append zero to ARD_RESET_OPTS rather than set Prioritise package ARM upload tools over path installed Add note in README on ARM tools versions Move openocd variant config script flag to OPTS
2018-01-02 18:35:47 +01:00
else
$(call show_config_variable,GDB_NAME,[COMPUTED])
endif
endif
ifndef UPLOAD_TOOL
UPLOAD_TOOL := $(call PARSE_BOARD,$(BOARD_TAG),upload.tool)
ifndef UPLOAD_TOOL
UPLOAD_TOOL := openocd
else
$(call show_config_variable,UPLOAD_TOOL,[COMPUTED])
endif
endif
ifndef BOOTLOADER_UPLOAD_TOOL
BOOTLOADER_UPLOAD_TOOL := $(call PARSE_BOARD,$(BOARD_TAG),bootloader.tool)
ifndef BOOTLOADER_UPLOAD_TOOL
BOOTLOADER_UPLOAD_TOOL := openocd
else
$(call show_config_variable,BOOTLOADER_UPLOAD_TOOL,[COMPUTED])
endif
endif
# processor stuff
ifndef MCU
MCU := $(call PARSE_BOARD,$(BOARD_TAG),build.mcu)
endif
ifndef MCU_FLAG_NAME
MCU_FLAG_NAME=mcpu
endif
# native port emulates an AVR chip to use AVRDUDE
ifndef AVRDUDE_MCU
AVRDUDE_MCU := $(call PARSE_BOARD,$(BOARD_TAG),build.emu.mcu)
endif
# GDP settings
ifndef GDB_PORT
# default to localhost default OpenOCD port
GDB_PORT = localhost:3333
endif
ifndef GDB_OPTS
# if using BMP do a scan and attach
ifeq ($(findstring /dev/tty, $(strip $(GDB_PORT))), /dev/tty)
GDB_OPTS = -ex "target extended-remote $(GDB_PORT)" -ex "monitor swdp_scan" -ex "attach 1" -ex "load" -d $(OBJDIR) $(TARGET_ELF)
else
GDB_OPTS = -ex "target extended-remote $(GDB_PORT)" -ex "load" -d $(OBJDIR) $(TARGET_ELF)
endif
endif
ifndef GDB_UPLOAD_OPTS
GDB_UPLOAD_OPTS = $(GDB_OPTS) -ex "set confirm off" -ex "set target-async off" -ex "set remotetimeout 30" -ex "detach" -ex "kill" -ex "quit"
endif
########################################################################
# OpenOCD for SAM devices
ifndef OPENOCD
BUNDLED_OPENOCD_DIR := $(call dir_if_exists,$(ARDUINO_PACKAGE_DIR)/$(ARDMK_VENDOR)/tools/openocd)
# Try Arduino support package first
ifdef BUNDLED_OPENOCD_DIR
ARM_TOOL_PATH detection, use latest version of tool if multiple found
2019-07-17 10:19:03 +02:00
ifndef OPENOCD_VER
OPENOCD_VER := $(shell basename $(lastword $(wildcard $(BUNDLED_OPENOCD_DIR)/*)))
endif
SAMD Cortex M0 device support (Zero, MKR1000, etc) Compilation improvements by adding variant as other obj but not working on device Arduino Zero devices with OpenOCD working Created ARM_TOOLS_DIR and define arm toolchain executables in Sam.mk Check avr-gcc on last AVR_TOOLS_DIR detect and indenting formatting GDB debugging and programming added Documentation updates and define ARDMK_VENDOR rather than include Sam.mk Expand all parse_boards when defined rather than when used Trim extra defines regex working on both macOS and Linux but need better fix Print USB ids and added debug usage to readme Add note on Arduino package dir and made board.txt work Do ARM ARDUINO_ARCH define in Arduino.mk] Add MZeroBlink to non-testable examples for now Remove \B from extra defines grep Add ARDUINO_PACKAGE_DIR for board support files Fix a typo in the README Fix typo in arduino-mk-vars.md Prevent re-including Arduino.mk from Sam.mk when make restarts for upload Add catrina to ARD_REST_OPTS if/else Remove realpath in Sam.mk for cygwin compatability SAMD bootloader support in ard-reset using --zero Enters bootloader using open/close of port at 1200 BAUD, then polls the attached devices for new port enumerating (bootloader). This is how the Arduino IDE operates Bossa support for Zero, MKR1000 etc Re-word Arm README section after Native USB development Reset for zero refactored like IDE Zero bootloader reset tested on macOS and comments added Re-word ARM bootloader and remove imports from testing Patch changes ARDMK_VENDOR->ARCHITECHTURE, show_config_vars, ignore CORE_VER if emtpy Common.mk header guard, openocd/bossac avoid separator, typos Documentation update for patch changes Move ARM tools to Sam.mk and auto-detect include Correct accidental commit of Blink Makefile change Lib fix with alternative core and documentation Append zero to ARD_RESET_OPTS rather than set Prioritise package ARM upload tools over path installed Add note in README on ARM tools versions Move openocd variant config script flag to OPTS
2018-01-02 18:35:47 +01:00
OPENOCD = $(BUNDLED_OPENOCD_DIR)/$(OPENOCD_VER)/bin/openocd -s $(BUNDLED_OPENOCD_DIR)/$(OPENOCD_VER)/share/openocd/scripts/
$(call show_config_variable,OPENOCD,[AUTODETECTED],(from ARDUINO_PACKAGE_DIR))
else
# Otherwise look on user path
OPENOCD := $(shell which openocd 2>/dev/null)
ifdef OPENOCD
$(call show_config_variable,OPENOCD,[AUTODETECTED],(found in $$PATH))
endif
endif
else
$(call show_config_variable,OPENOCD,[USER])
endif
ifndef OPENOCD_OPTS
OPENOCD_OPTS += -d2 -f $(ALTERNATE_CORE_PATH)/variants/$(VARIANT)/$(OPENOCD_SCRIPT)
endif
########################################################################
# Bossa for SAM devices
ifndef BOSSA
BUNDLED_BOSSA_DIR := $(call dir_if_exists,$(ARDUINO_PACKAGE_DIR)/$(ARDMK_VENDOR)/tools/bossac)
# Try Arduino support package first
ifdef BUNDLED_BOSSA_DIR
ARM_TOOL_PATH detection, use latest version of tool if multiple found
2019-07-17 10:19:03 +02:00
ifndef BOSSA_VER
BOSSA_VER := $(shell basename $(lastword $(wildcard $(BUNDLED_BOSSA_DIR)/*)))
endif
SAMD Cortex M0 device support (Zero, MKR1000, etc) Compilation improvements by adding variant as other obj but not working on device Arduino Zero devices with OpenOCD working Created ARM_TOOLS_DIR and define arm toolchain executables in Sam.mk Check avr-gcc on last AVR_TOOLS_DIR detect and indenting formatting GDB debugging and programming added Documentation updates and define ARDMK_VENDOR rather than include Sam.mk Expand all parse_boards when defined rather than when used Trim extra defines regex working on both macOS and Linux but need better fix Print USB ids and added debug usage to readme Add note on Arduino package dir and made board.txt work Do ARM ARDUINO_ARCH define in Arduino.mk] Add MZeroBlink to non-testable examples for now Remove \B from extra defines grep Add ARDUINO_PACKAGE_DIR for board support files Fix a typo in the README Fix typo in arduino-mk-vars.md Prevent re-including Arduino.mk from Sam.mk when make restarts for upload Add catrina to ARD_REST_OPTS if/else Remove realpath in Sam.mk for cygwin compatability SAMD bootloader support in ard-reset using --zero Enters bootloader using open/close of port at 1200 BAUD, then polls the attached devices for new port enumerating (bootloader). This is how the Arduino IDE operates Bossa support for Zero, MKR1000 etc Re-word Arm README section after Native USB development Reset for zero refactored like IDE Zero bootloader reset tested on macOS and comments added Re-word ARM bootloader and remove imports from testing Patch changes ARDMK_VENDOR->ARCHITECHTURE, show_config_vars, ignore CORE_VER if emtpy Common.mk header guard, openocd/bossac avoid separator, typos Documentation update for patch changes Move ARM tools to Sam.mk and auto-detect include Correct accidental commit of Blink Makefile change Lib fix with alternative core and documentation Append zero to ARD_RESET_OPTS rather than set Prioritise package ARM upload tools over path installed Add note in README on ARM tools versions Move openocd variant config script flag to OPTS
2018-01-02 18:35:47 +01:00
BOSSA = $(BUNDLED_BOSSA_DIR)/$(BOSSA_VER)/bossac
$(call show_config_variable,BOSSA,[AUTODETECTED],(from ARDUINO_PACKAGE_DIR))
else
# Otherwise look on user path
BOSSA := $(shell which bossac 2>/dev/null)
ifdef BOSSA
$(call show_config_variable,BOSSA,[AUTODETECTED],(found in $$PATH))
endif
endif
else
$(call show_config_variable,BOSSA,[USER])
endif
ifndef BOSSA_OPTS
BOSSA_OPTS += -d --info --erase --write --verify --reset
Support for Arduino Due added Update HISTORY.md Add avr core emulation to C sources
2018-06-12 14:59:58 +02:00
# Arduino Due forces RS-232 mode and boots from flash
ifeq ($(findstring arduino_due, $(strip $(VARIANT))), arduino_due)
BOSSA_OPTS += -U false -b
endif
SAMD Cortex M0 device support (Zero, MKR1000, etc) Compilation improvements by adding variant as other obj but not working on device Arduino Zero devices with OpenOCD working Created ARM_TOOLS_DIR and define arm toolchain executables in Sam.mk Check avr-gcc on last AVR_TOOLS_DIR detect and indenting formatting GDB debugging and programming added Documentation updates and define ARDMK_VENDOR rather than include Sam.mk Expand all parse_boards when defined rather than when used Trim extra defines regex working on both macOS and Linux but need better fix Print USB ids and added debug usage to readme Add note on Arduino package dir and made board.txt work Do ARM ARDUINO_ARCH define in Arduino.mk] Add MZeroBlink to non-testable examples for now Remove \B from extra defines grep Add ARDUINO_PACKAGE_DIR for board support files Fix a typo in the README Fix typo in arduino-mk-vars.md Prevent re-including Arduino.mk from Sam.mk when make restarts for upload Add catrina to ARD_REST_OPTS if/else Remove realpath in Sam.mk for cygwin compatability SAMD bootloader support in ard-reset using --zero Enters bootloader using open/close of port at 1200 BAUD, then polls the attached devices for new port enumerating (bootloader). This is how the Arduino IDE operates Bossa support for Zero, MKR1000 etc Re-word Arm README section after Native USB development Reset for zero refactored like IDE Zero bootloader reset tested on macOS and comments added Re-word ARM bootloader and remove imports from testing Patch changes ARDMK_VENDOR->ARCHITECHTURE, show_config_vars, ignore CORE_VER if emtpy Common.mk header guard, openocd/bossac avoid separator, typos Documentation update for patch changes Move ARM tools to Sam.mk and auto-detect include Correct accidental commit of Blink Makefile change Lib fix with alternative core and documentation Append zero to ARD_RESET_OPTS rather than set Prioritise package ARM upload tools over path installed Add note in README on ARM tools versions Move openocd variant config script flag to OPTS
2018-01-02 18:35:47 +01:00
endif
get_bootloader = $(shell $(RESET_CMD) | tail -1)
# if not bootloader port defined (ISP_PORT), automatically grab first port after reset
# if not on windows
ifndef ISP_PORT
ifeq ($(CURRENT_OS), WINDOWS)
BOSSA_OPTS += --port=$(COM_STYLE_MONITOR_PORT)
else
Support for Arduino Due added Update HISTORY.md Add avr core emulation to C sources
2018-06-12 14:59:58 +02:00
BOSSA_OPTS += --port=$(notdir $(call get_monitor_port))
SAMD Cortex M0 device support (Zero, MKR1000, etc) Compilation improvements by adding variant as other obj but not working on device Arduino Zero devices with OpenOCD working Created ARM_TOOLS_DIR and define arm toolchain executables in Sam.mk Check avr-gcc on last AVR_TOOLS_DIR detect and indenting formatting GDB debugging and programming added Documentation updates and define ARDMK_VENDOR rather than include Sam.mk Expand all parse_boards when defined rather than when used Trim extra defines regex working on both macOS and Linux but need better fix Print USB ids and added debug usage to readme Add note on Arduino package dir and made board.txt work Do ARM ARDUINO_ARCH define in Arduino.mk] Add MZeroBlink to non-testable examples for now Remove \B from extra defines grep Add ARDUINO_PACKAGE_DIR for board support files Fix a typo in the README Fix typo in arduino-mk-vars.md Prevent re-including Arduino.mk from Sam.mk when make restarts for upload Add catrina to ARD_REST_OPTS if/else Remove realpath in Sam.mk for cygwin compatability SAMD bootloader support in ard-reset using --zero Enters bootloader using open/close of port at 1200 BAUD, then polls the attached devices for new port enumerating (bootloader). This is how the Arduino IDE operates Bossa support for Zero, MKR1000 etc Re-word Arm README section after Native USB development Reset for zero refactored like IDE Zero bootloader reset tested on macOS and comments added Re-word ARM bootloader and remove imports from testing Patch changes ARDMK_VENDOR->ARCHITECHTURE, show_config_vars, ignore CORE_VER if emtpy Common.mk header guard, openocd/bossac avoid separator, typos Documentation update for patch changes Move ARM tools to Sam.mk and auto-detect include Correct accidental commit of Blink Makefile change Lib fix with alternative core and documentation Append zero to ARD_RESET_OPTS rather than set Prioritise package ARM upload tools over path installed Add note in README on ARM tools versions Move openocd variant config script flag to OPTS
2018-01-02 18:35:47 +01:00
endif
else
BOSSA_OPTS += --port=$(ISP_PORT)
endif
########################################################################
# EXECUTABLES
# Define them here to use ARM_TOOLS_PATH and allow auto finding of AVR_TOOLS_PATH
Added the TOOL_PREFIX variable for setting up the executable tools. Currently three different tool chains seem to be used: * avr-* * pic32-* * arm-none-eabi-* These all get set up independently. This patch centralizes the definitions of the executable tools and does it generically, by means of the newly introduced TOOL_PREFIX variable. Setting up a tool chain is now simply a matter of defining the TOOL_PREFIX variable. For the currently supported tool chains it gets set to avr, pic32 or arm-none-eabi. Arbitrary tool chains can now easily be set up, by the TOOL_PREFIX variable. Although the use of the OVERRIDE_EXECUTABLES variable is now almost not justifiable, it was left as-is, in order to assure backwards compatibility.
2018-09-14 16:14:14 +02:00
AVR_TOOLS_DIR := $(ARM_TOOLS_DIR)
SAMD Cortex M0 device support (Zero, MKR1000, etc) Compilation improvements by adding variant as other obj but not working on device Arduino Zero devices with OpenOCD working Created ARM_TOOLS_DIR and define arm toolchain executables in Sam.mk Check avr-gcc on last AVR_TOOLS_DIR detect and indenting formatting GDB debugging and programming added Documentation updates and define ARDMK_VENDOR rather than include Sam.mk Expand all parse_boards when defined rather than when used Trim extra defines regex working on both macOS and Linux but need better fix Print USB ids and added debug usage to readme Add note on Arduino package dir and made board.txt work Do ARM ARDUINO_ARCH define in Arduino.mk] Add MZeroBlink to non-testable examples for now Remove \B from extra defines grep Add ARDUINO_PACKAGE_DIR for board support files Fix a typo in the README Fix typo in arduino-mk-vars.md Prevent re-including Arduino.mk from Sam.mk when make restarts for upload Add catrina to ARD_REST_OPTS if/else Remove realpath in Sam.mk for cygwin compatability SAMD bootloader support in ard-reset using --zero Enters bootloader using open/close of port at 1200 BAUD, then polls the attached devices for new port enumerating (bootloader). This is how the Arduino IDE operates Bossa support for Zero, MKR1000 etc Re-word Arm README section after Native USB development Reset for zero refactored like IDE Zero bootloader reset tested on macOS and comments added Re-word ARM bootloader and remove imports from testing Patch changes ARDMK_VENDOR->ARCHITECHTURE, show_config_vars, ignore CORE_VER if emtpy Common.mk header guard, openocd/bossac avoid separator, typos Documentation update for patch changes Move ARM tools to Sam.mk and auto-detect include Correct accidental commit of Blink Makefile change Lib fix with alternative core and documentation Append zero to ARD_RESET_OPTS rather than set Prioritise package ARM upload tools over path installed Add note in README on ARM tools versions Move openocd variant config script flag to OPTS
2018-01-02 18:35:47 +01:00
#GDB = $(ARM_TOOLS_PATH)/$(GDB_NAME)
# Use system gdb for now as Arduino supplied has lib error?
GDB = $(GDB_NAME)
########################################################################
# FLAGS
ifndef USB_TYPE
USB_TYPE = USBCON
endif
ifndef USB_PRODUCT
USB_PRODUCT := $(call PARSE_BOARD,$(BOARD_TAG),build.usb_product)
ifdef USB_PRODUCT
$(call show_config_variable,USB_PRODUCT,[COMPUTED])
endif
endif
ifndef USB_MANUFACTURER
USB_MANUFACTURER := $(call PARSE_BOARD,$(BOARD_TAG),build.usb_manufacturer)
ifndef USB_MANUFACTURER
USB_MANUFACTURER = "Unknown"
else
$(call show_config_variable,USB_MANUFACTURER,[COMPUTED])
endif
endif
ifndef USB_VID
USB_VID := $(call PARSE_BOARD,$(BOARD_TAG),build.vid)
ifdef USB_VID
$(call show_config_variable,USB_VID,[COMPUTED])
endif
endif
ifndef USB_PID
USB_PID := $(call PARSE_BOARD,$(BOARD_TAG),build.pid)
ifdef USB_PID
$(call show_config_variable,USB_PID,[COMPUTED])
endif
endif
# Bootloader settings
ifndef BOOTLOADER_SIZE
BOOTLOADER_SIZE := $(call PARSE_BOARD,$(BOARD_TAG),bootloader.size)
ifndef BOOTLOADER_SIZE
BOOTLOADER_SIZE := 0x2000
else
$(call show_config_variable,BOOTLOADER_SIZE,[COMPUTED])
endif
endif
ifndef BOOTLOADER_UNPROTECT
BOOTLOADER_UNPROTECT := $(call PARSE_BOARD,$(BOARD_TAG),bootloader.cmd_unprotect)
ifndef BOOTLOADER_UNPROTECT
BOOTLOADER_UNPROTECT := at91samd bootloader 0
else
$(call show_config_variable,BOOTLOADER_UNPROTECT,[COMPUTED])
endif
endif
ifndef BOOTLOADER_PROTECT
BOOTLOADER_PROTECT := $(call PARSE_BOARD,$(BOARD_TAG),bootloader.cmd_protect)
ifndef BOOTLOADER_PROTECT
BOOTLOADER_PROTECT := at91samd bootloader 16384
else
$(call show_config_variable,BOOTLOADER_PROTECT,[COMPUTED])
endif
endif
ifndef BOOTLOADER_PROTECT_VERIFY
BOOTLOADER_PROTECT_VERIFY := $(call PARSE_BOARD,$(BOARD_TAG),bootloader.cmd_protect_verify)
ifndef BOOTLOADER_PROTECT_VERIFY
BOOTLOADER_PROTECT_VERIFY := at91samd bootloader
else
$(call show_config_variable,BOOTLOADER_PROTECT_VERIFY,[COMPUTED])
endif
endif
add swtich for ARM 'avr-size' so that .elf is passed as arg `avr-size` was defaulting to AVR non-aware when using ARM builds, which meant passing .hex rather than .elf to size and limiting size readout. Adding a switch for defining `avr-size` and SIZEFLAGS to Sam.mk seems like the best way to include proper ARM support (despite conflicting naming).
2019-03-25 14:36:03 +01:00
CFLAGS_STD += -std=gnu11
SAMD Cortex M0 device support (Zero, MKR1000, etc) Compilation improvements by adding variant as other obj but not working on device Arduino Zero devices with OpenOCD working Created ARM_TOOLS_DIR and define arm toolchain executables in Sam.mk Check avr-gcc on last AVR_TOOLS_DIR detect and indenting formatting GDB debugging and programming added Documentation updates and define ARDMK_VENDOR rather than include Sam.mk Expand all parse_boards when defined rather than when used Trim extra defines regex working on both macOS and Linux but need better fix Print USB ids and added debug usage to readme Add note on Arduino package dir and made board.txt work Do ARM ARDUINO_ARCH define in Arduino.mk] Add MZeroBlink to non-testable examples for now Remove \B from extra defines grep Add ARDUINO_PACKAGE_DIR for board support files Fix a typo in the README Fix typo in arduino-mk-vars.md Prevent re-including Arduino.mk from Sam.mk when make restarts for upload Add catrina to ARD_REST_OPTS if/else Remove realpath in Sam.mk for cygwin compatability SAMD bootloader support in ard-reset using --zero Enters bootloader using open/close of port at 1200 BAUD, then polls the attached devices for new port enumerating (bootloader). This is how the Arduino IDE operates Bossa support for Zero, MKR1000 etc Re-word Arm README section after Native USB development Reset for zero refactored like IDE Zero bootloader reset tested on macOS and comments added Re-word ARM bootloader and remove imports from testing Patch changes ARDMK_VENDOR->ARCHITECHTURE, show_config_vars, ignore CORE_VER if emtpy Common.mk header guard, openocd/bossac avoid separator, typos Documentation update for patch changes Move ARM tools to Sam.mk and auto-detect include Correct accidental commit of Blink Makefile change Lib fix with alternative core and documentation Append zero to ARD_RESET_OPTS rather than set Prioritise package ARM upload tools over path installed Add note in README on ARM tools versions Move openocd variant config script flag to OPTS
2018-01-02 18:35:47 +01:00
CPPFLAGS += -DMD -D$(USB_TYPE) '-DUSB_PRODUCT=$(USB_PRODUCT)' '-DUSB_MANUFACTURER=$(USB_MANUFACTURER)'
# Get extra define flags from boards.txt
detect and use GNU grep on macOS
2020-08-04 11:51:35 +02:00
EXFLAGS := $(shell echo $(call PARSE_BOARD,$(BOARD_TAG),build.extra_flags) | $(GREP) -oE '(-D)\w+')
SAMD Cortex M0 device support (Zero, MKR1000, etc) Compilation improvements by adding variant as other obj but not working on device Arduino Zero devices with OpenOCD working Created ARM_TOOLS_DIR and define arm toolchain executables in Sam.mk Check avr-gcc on last AVR_TOOLS_DIR detect and indenting formatting GDB debugging and programming added Documentation updates and define ARDMK_VENDOR rather than include Sam.mk Expand all parse_boards when defined rather than when used Trim extra defines regex working on both macOS and Linux but need better fix Print USB ids and added debug usage to readme Add note on Arduino package dir and made board.txt work Do ARM ARDUINO_ARCH define in Arduino.mk] Add MZeroBlink to non-testable examples for now Remove \B from extra defines grep Add ARDUINO_PACKAGE_DIR for board support files Fix a typo in the README Fix typo in arduino-mk-vars.md Prevent re-including Arduino.mk from Sam.mk when make restarts for upload Add catrina to ARD_REST_OPTS if/else Remove realpath in Sam.mk for cygwin compatability SAMD bootloader support in ard-reset using --zero Enters bootloader using open/close of port at 1200 BAUD, then polls the attached devices for new port enumerating (bootloader). This is how the Arduino IDE operates Bossa support for Zero, MKR1000 etc Re-word Arm README section after Native USB development Reset for zero refactored like IDE Zero bootloader reset tested on macOS and comments added Re-word ARM bootloader and remove imports from testing Patch changes ARDMK_VENDOR->ARCHITECHTURE, show_config_vars, ignore CORE_VER if emtpy Common.mk header guard, openocd/bossac avoid separator, typos Documentation update for patch changes Move ARM tools to Sam.mk and auto-detect include Correct accidental commit of Blink Makefile change Lib fix with alternative core and documentation Append zero to ARD_RESET_OPTS rather than set Prioritise package ARM upload tools over path installed Add note in README on ARM tools versions Move openocd variant config script flag to OPTS
2018-01-02 18:35:47 +01:00
# Strip only defines from extra flags as boards file appends user {build.usb}
CPPFLAGS += $(EXFLAGS)
CPPFLAGS += -DUSB_VID=$(USB_VID)
CPPFLAGS += -DUSB_PID=$(USB_PID)
# Cortex compiler flags
CPPFLAGS += -mthumb -nostdlib --param max-inline-insns-single=500 -fno-exceptions -Wl,-Map=$(OBJDIR)/$(TARGET).map
CXXFLAGS += -fno-rtti -fno-threadsafe-statics -std=gnu++11
add swtich for ARM 'avr-size' so that .elf is passed as arg `avr-size` was defaulting to AVR non-aware when using ARM builds, which meant passing .hex rather than .elf to size and limiting size readout. Adding a switch for defining `avr-size` and SIZEFLAGS to Sam.mk seems like the best way to include proper ARM support (despite conflicting naming).
2019-03-25 14:36:03 +01:00
ifndef SIZEFLAGS
SIZEFLAGS += -B
endif
SAMD Cortex M0 device support (Zero, MKR1000, etc) Compilation improvements by adding variant as other obj but not working on device Arduino Zero devices with OpenOCD working Created ARM_TOOLS_DIR and define arm toolchain executables in Sam.mk Check avr-gcc on last AVR_TOOLS_DIR detect and indenting formatting GDB debugging and programming added Documentation updates and define ARDMK_VENDOR rather than include Sam.mk Expand all parse_boards when defined rather than when used Trim extra defines regex working on both macOS and Linux but need better fix Print USB ids and added debug usage to readme Add note on Arduino package dir and made board.txt work Do ARM ARDUINO_ARCH define in Arduino.mk] Add MZeroBlink to non-testable examples for now Remove \B from extra defines grep Add ARDUINO_PACKAGE_DIR for board support files Fix a typo in the README Fix typo in arduino-mk-vars.md Prevent re-including Arduino.mk from Sam.mk when make restarts for upload Add catrina to ARD_REST_OPTS if/else Remove realpath in Sam.mk for cygwin compatability SAMD bootloader support in ard-reset using --zero Enters bootloader using open/close of port at 1200 BAUD, then polls the attached devices for new port enumerating (bootloader). This is how the Arduino IDE operates Bossa support for Zero, MKR1000 etc Re-word Arm README section after Native USB development Reset for zero refactored like IDE Zero bootloader reset tested on macOS and comments added Re-word ARM bootloader and remove imports from testing Patch changes ARDMK_VENDOR->ARCHITECHTURE, show_config_vars, ignore CORE_VER if emtpy Common.mk header guard, openocd/bossac avoid separator, typos Documentation update for patch changes Move ARM tools to Sam.mk and auto-detect include Correct accidental commit of Blink Makefile change Lib fix with alternative core and documentation Append zero to ARD_RESET_OPTS rather than set Prioritise package ARM upload tools over path installed Add note in README on ARM tools versions Move openocd variant config script flag to OPTS
2018-01-02 18:35:47 +01:00
AMCU := $(call PARSE_BOARD,$(BOARD_TAG),build.mcu)
BOARD_LINKER_SCRIPT := $(call PARSE_BOARD,$(BOARD_TAG),build.ldscript)
OPENOCD_SCRIPT := $(call PARSE_BOARD,$(BOARD_TAG),build.openocdscript)
LINKER_SCRIPTS := -T$(ALTERNATE_CORE_PATH)/variants/$(VARIANT)/$(BOARD_LINKER_SCRIPT)
OTHER_LIBS := $(call PARSE_BOARD,$(BOARD_TAG),build.flags.libs)
Support for Arduino Due added Update HISTORY.md Add avr core emulation to C sources
2018-06-12 14:59:58 +02:00
# Due and SAMD boards have different flags/chip specific libs
ifeq ($(findstring arduino_due, $(strip $(VARIANT))), arduino_due)
CPPFLAGS += -Dprintf=iprintf -DARDUINO_SAM_DUE
LDFLAGS += -mthumb -Wl,--cref -Wl,--check-sections -Wl,--gc-sections -Wl,--entry=Reset_Handler -Wl,--unresolved-symbols=report-all -Wl,--warn-common -Wl,--warn-section-align -Wl,--start-group -u _sbrk -u link -u _close -u _fstat -u _isatty -u _lseek -u _read -u _write -u _exit -u kill -u _getpid
LDFLAGS += -L$(LIB_PATH) -lm # -larm_cortexM3l_math # IDE doesn't include Cortex-M3 math lib on Due for some reason
OTHER_LIBS += $(ALTERNATE_CORE_PATH)/variants/$(VARIANT)/libsam_sam3x8e_gcc_rel.a
else
LDFLAGS += --specs=nano.specs --specs=nosys.specs -mthumb -Wl,--cref -Wl,--check-sections -Wl,--gc-sections -Wl,--unresolved-symbols=report-all -Wl,--warn-common -Wl,--warn-section-align -Wl,--start-group
LDFLAGS += -larm_cortexM0l_math -L$(LIB_PATH) -lm
endif
SAMD Cortex M0 device support (Zero, MKR1000, etc) Compilation improvements by adding variant as other obj but not working on device Arduino Zero devices with OpenOCD working Created ARM_TOOLS_DIR and define arm toolchain executables in Sam.mk Check avr-gcc on last AVR_TOOLS_DIR detect and indenting formatting GDB debugging and programming added Documentation updates and define ARDMK_VENDOR rather than include Sam.mk Expand all parse_boards when defined rather than when used Trim extra defines regex working on both macOS and Linux but need better fix Print USB ids and added debug usage to readme Add note on Arduino package dir and made board.txt work Do ARM ARDUINO_ARCH define in Arduino.mk] Add MZeroBlink to non-testable examples for now Remove \B from extra defines grep Add ARDUINO_PACKAGE_DIR for board support files Fix a typo in the README Fix typo in arduino-mk-vars.md Prevent re-including Arduino.mk from Sam.mk when make restarts for upload Add catrina to ARD_REST_OPTS if/else Remove realpath in Sam.mk for cygwin compatability SAMD bootloader support in ard-reset using --zero Enters bootloader using open/close of port at 1200 BAUD, then polls the attached devices for new port enumerating (bootloader). This is how the Arduino IDE operates Bossa support for Zero, MKR1000 etc Re-word Arm README section after Native USB development Reset for zero refactored like IDE Zero bootloader reset tested on macOS and comments added Re-word ARM bootloader and remove imports from testing Patch changes ARDMK_VENDOR->ARCHITECHTURE, show_config_vars, ignore CORE_VER if emtpy Common.mk header guard, openocd/bossac avoid separator, typos Documentation update for patch changes Move ARM tools to Sam.mk and auto-detect include Correct accidental commit of Blink Makefile change Lib fix with alternative core and documentation Append zero to ARD_RESET_OPTS rather than set Prioritise package ARM upload tools over path installed Add note in README on ARM tools versions Move openocd variant config script flag to OPTS
2018-01-02 18:35:47 +01:00
# OpenOCD reset command only for now
ifeq ($(strip $(UPLOAD_TOOL)), openocd)
RESET_CMD = $(OPENOCD) $(OPENOCD_OPTS) -c "telnet_port disabled; init; targets; reset run; shutdown"
else
# Set zero flag for ard-reset for 1200 baud boot to bootloader
ARD_RESET_OPTS += --zero
endif
########################################################################
# automatially include Arduino.mk for the user
$(call show_separator)
$(call arduino_output,Arduino.mk Configuration:)
include $(ARDMK_DIR)/Arduino.mk
Support for Arduino Due added Update HISTORY.md Add avr core emulation to C sources
2018-06-12 14:59:58 +02:00
print-% : ; @echo $* = $($*)
Reference in a new issue Copy permalink