Merge pull request #10 from gaftech/master

EEPROM upload support

arduino-mk/Arduino.mk

@@ -148,6 +148,12 @@
 #   		- Changed shebang to use /usr/bin/env (https://github.com/anm)
 #   		- set USB_VID and USB_PID only for leonardo boards(https://github.com/alohr)
 #
+#		0.10.3 16.xii 2012 gaftech
+#           - Enabling creation of EEPROM file (.eep)
+#           - EEPROM upload: eeprom and raw_eeprom targets
+#           - Auto EEPROM upload with isp mode: ISP_EEPROM option.
+#           - Allow custom OBJDIR
+#
 ########################################################################
 #
 # PATHS YOU NEED TO SET UP
@@ -270,6 +276,8 @@
 #                      with your original source code.
 #   make verify_size - Verify that the size of the final file is less than
 #   				   the capacity of the micro controller.
+#   make eeprom      - upload the eep file
+#	make raw_eeprom  - upload the eep file without first resetting
 #
 ########################################################################
 #
@@ -309,6 +317,9 @@
 #     ISP_LOW_FUSE       = 0xff
 #     ISP_EXT_FUSE       = 0x01
 #
+# You can specify to also upload the EEPROM file:
+#     ISP_EEPROM   = 1
+#
 # I think the fuses here are fine for uploading to the ATmega168
 # without bootloader.
 #
@@ -663,6 +674,7 @@ endif
 # The name of the main targets
 TARGET_HEX = $(OBJDIR)/$(TARGET).hex
 TARGET_ELF = $(OBJDIR)/$(TARGET).elf
+TARGET_EEP = $(OBJDIR)/$(TARGET).eep
 TARGETS    = $(OBJDIR)/$(TARGET).*
 CORE_LIB   = $(OBJDIR)/libcore.a
 
@@ -890,15 +902,30 @@ ifndef ISP_PROG
     ISP_PROG	   = -c stk500v2
 endif
 
+# usb seems to be a reasonable default, at least on linux
+ifndef ISP_PORT
+	ISP_PORT       = usb
+endif
+
 AVRDUDE_ISP_OPTS = -P $(ISP_PORT) $(ISP_PROG)
 
+ifndef ISP_EEPROM
+	ISP_EEPROM  = 0
+endif
+
+AVRDUDE_UPLOAD_HEX = -U flash:w:$(TARGET_HEX):i
+AVRDUDE_UPLOAD_EEP = -U eeprom:w:$(TARGET_EEP):i
+AVRDUDE_ISPLOAD_OPTS = $(AVRDUDE_UPLOAD_HEX)
+ifneq ($(ISP_EEPROM), 0)
+	AVRDUDE_ISPLOAD_OPTS += $(AVRDUDE_UPLOAD_EEP)
+endif
 
 ########################################################################
 #
 # Explicit targets start here
 #
 
-all: 		$(OBJDIR) $(TARGET_HEX) verify_size
+all: 		$(OBJDIR) $(TARGET_EEP) $(TARGET_HEX) verify_size
 
 $(OBJDIR):
 		mkdir $(OBJDIR)
@@ -916,7 +943,13 @@ upload:		raw_upload
 
 raw_upload:	reset $(TARGET_HEX) verify_size
 		$(AVRDUDE) $(AVRDUDE_COM_OPTS) $(AVRDUDE_ARD_OPTS) \
-			-U flash:w:$(TARGET_HEX):i
+			$(AVRDUDE_UPLOAD_HEX)
+
+eeprom:		reset raw_eeprom
+
+raw_eeprom:	$(TARGET_EEP) $(TARGET_HEX)
+		$(AVRDUDE) $(AVRDUDE_COM_OPTS) $(AVRDUDE_ARD_OPTS) \
+			$(AVRDUDE_UPLOAD_EEP)
 
 reset:
 		$(RESET_CMD) $(call get_arduino_port)
@@ -932,14 +965,14 @@ reset_stty:
 		(sleep 0.1 || sleep 1)     ;\
 		$$STTYF $(call get_arduino_port) -hupcl
 
-ispload:	$(TARGET_HEX) verify_size
+ispload:	$(TARGET_EEP) $(TARGET_HEX) verify_size
 		$(AVRDUDE) $(AVRDUDE_COM_OPTS) $(AVRDUDE_ISP_OPTS) -e \
 			-U lock:w:$(ISP_LOCK_FUSE_PRE):m \
 			-U hfuse:w:$(ISP_HIGH_FUSE):m \
 			-U lfuse:w:$(ISP_LOW_FUSE):m \
 			-U efuse:w:$(ISP_EXT_FUSE):m
 		$(AVRDUDE) $(AVRDUDE_COM_OPTS) $(AVRDUDE_ISP_OPTS) -D \
-			-U flash:w:$(TARGET_HEX):i
+			$(AVRDUDE_ISPLOAD_OPTS)
 		$(AVRDUDE) $(AVRDUDE_COM_OPTS) $(AVRDUDE_ISP_OPTS) \
 			-U lock:w:$(ISP_LOCK_FUSE_POST):m