ispload probably should erase the flash+eeprom+lockbits as that's when you upload the sketch.
setting fuses should be just that, not deleting anything.
When assembling the command line for the various supported serial
monitors, MONITOR_CMD must match the name of one of the supported
commands to be recognized. Serial monitors given with leading path
components are not recognized, and a command like
make MONITOR_CMD=~/src/picocom/picocom monitor
errors out as the fallback monitor command is executed instead of the
picocom-specific one. However, sometimes it's necessary to specify a
supported serial monitor with its full path, because e.g. the user
wants to tests a freshly compiled version before installing it. Sure,
the user could just run the serial monitor directly, but that's
cumbersome because he has to pay attention to use the right baud rate
and USB port.
So strip all leading path components, if present, from MONITOR_CMD
using the 'nondir' make function before checking whether it's one of
the supported serial monitors. This way commands like the above would
just work.
While at it, remove the single quotes around 'putty': they are both
unnecessary and inconsistent with similar constructs throughout
Arduino.mk.
POSIX shells treat an unquoted [abcd] as a pattern bracket expression
and apply it for filename expansion. This kicks in and causes
troubles in the space_pad_to function when it's called to pad prefix
tags like '[AUTODETECT]', because the argument holding such a tag is
passed to a shell unquoted. The result is funny output when the
directory containing the Makefile also contains any files or
directories, whose name is a single upper-case character that can be
found in any prefix tags:
$ touch A B C D
$ make
-------------------------
Arduino.mk Configuration:
- A C D CURRENT_OS = LINUX
- [USER] ARDUINO_DIR = /home/szeder/src/arduino/arduino-1.8.1
- [USER] ARDMK_DIR = /home/szeder/src/arduino/Arduino-Makefile
- A C D ARDUINO_VERSION = 181
- A D ARCHITECTURE = avr
- A D ARDMK_VENDOR = arduino
- A D ARDUINO_SKETCHBOOK =
<snip>
Prevent this by quoting space_pad_to's parameter when passing it to a
shell.
Considering the number of project files spread in different locations
when developing an Arduino project, proper use of tags can be difficult;
resolving beyond local functions.
I've added automatic generation of a tags file, which includes:
* Standard ctags source in project dir (.c, .cpp, .h)
* Arduino source in project dir (.ide, .pde)
* Arduino core based on detected project core from Arduino install.
* Included Arduino libraries from user library folder.
As a Vim user I find this hugely useful and think it would be a useful
addtion for others. Target has been added as `make tags`.
doesn't support LTO or plugins. Fixes Issue #456
So essentially LTO support will only be enabled with avr-gcc 4.9.2 which comes with 1.6.10 or later
and Debian, Ubuntu etc; not 4.8.1 which comes with IDE 1.6.9 and a few earlier versions.
Tested with:
* 1.6.8 (avr-gcc 4.8.1 which doesn't support LTO so uses avr-ar and doesn't set LTO flags)
* 1.6.12 (avr-gcc 4.9.2 which supports LTO so uses avr-gcc-ar and sets LTO flags)
* 1.0.5 with Debian avr-gcc 4.9.2 (supports LTO so uses avr-gcc-ar and sets LTO flags)
$ARCHITECTURE is probably safe as that's usually called $ARCH.
Fixes issue #386.
Need to decide if this is going to upset too many user's who have already
started using $VENDOR - and who uses tcsh? ;-)
With this fix the `TARGET` variable is set correctly when the project directory
(or its path) contains spaces. So in this case:
/Users/Joe/Dropbox (Personal)/example project
`TARGET` will be set to `example_project` instead of `Dropbox example project`
(like it was before this fix).
Needed to fix the new wiring_pulse.S in IDE 1.6.5 which
also has a wiring_pulse.c source file.
Mostly rebased @peplin's PR #266, so should allow us
to support newer chipKIT builds too.
