########################################################################
#
# Support for Teensy 3.x boards
#
# https://www.pjrc.com/teensy/
#
# You must install teensyduino for this Makefile to work:
#
# http://www.pjrc.com/teensy/teensyduino.html
#
# Copyright (C) 2014 Jeremy Shaw <jeremy@n-heptane.com> based on
# work that is copyright Sudar, Nicholas Zambetti, David A. Mellis
# & Hernando Barragan.
#
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as
# published by the Free Software Foundation; either version 2.1 of the
# License, or (at your option) any later version.
#
# Adapted from Arduino 0011 Makefile by M J Oldfield
#
# Original Arduino adaptation by mellis, eighthave, oli.keller
#
# Refer to HISTORY.md file for complete history of changes
#
########################################################################


ifndef ARDMK_DIR
    ARDMK_DIR := $(realpath $(dir $(realpath $(lastword $(MAKEFILE_LIST)))))
endif

# include Common.mk now we know where it is
include $(ARDMK_DIR)/Common.mk

ARDMK_VENDOR        = teensy
ARDUINO_CORE_PATH   = $(ARDUINO_DIR)/hardware/teensy/avr/cores/teensy3
BOARDS_TXT          = $(ARDUINO_DIR)/hardware/$(ARDMK_VENDOR)/avr/boards.txt


ifndef F_CPU
  ifndef BOARD_SUB
    SPEEDS := $(call PARSE_BOARD,"$(BOARD_TAG),menu.speed.*.build.fcpu") # Obtain sequence of supported frequencies.
    SPEEDS := $(shell printf "%d\n" $(SPEEDS) | sort -g) # Sort it, just in case. Printf to re-append newlines so that sort works.
    F_CPU := $(lastword $(SPEEDS)) # List is sorted in ascending order. Take the fastest speed.
    #$(info "speeds is " $(SPEEDS))  # Good for debugging
  else
    F_CPU := $(call PARSE_BOARD,$(BOARD_TAG),menu.speed.$(BOARD_SUB).build.fcpu)
  endif
endif

# if boards.txt gets modified, look there, else hard code it
ARCHITECTURE  = $(call PARSE_BOARD,$(BOARD_TAG),build.architecture)
ifeq ($(strip $(ARCHITECTURE)),)
	ARCHITECTURE = arm
endif

AVR_TOOLS_DIR = $(call dir_if_exists,$(ARDUINO_DIR)/hardware/tools/$(ARCHITECTURE))

# define plaform lib dir ignoring teensy's oversight on putting it all in avr
ifndef ARDUINO_PLATFORM_LIB_PATH
    ARDUINO_PLATFORM_LIB_PATH = $(ARDUINO_DIR)/hardware/$(ARDMK_VENDOR)/avr/libraries
    $(call show_config_variable,ARDUINO_PLATFORM_LIB_PATH,[COMPUTED],(from ARDUINO_DIR))
endif

########################################################################
# command names

TOOL_PREFIX = arm-none-eabi

# processor stuff
ifndef MCU
    MCU := $(call PARSE_BOARD,$(BOARD_TAG),build.mcu)
endif

ifndef MCU_FLAG_NAME
    MCU_FLAG_NAME=mcpu
endif

########################################################################
# FLAGS
ifndef USB_TYPE
    USB_TYPE = USB_SERIAL
endif

CPPFLAGS += -DLAYOUT_US_ENGLISH -D$(USB_TYPE)

CPPFLAGS += $(call PARSE_BOARD,$(BOARD_TAG),build.option)

CXXFLAGS += $(call PARSE_BOARD,$(BOARD_TAG),build.cppoption)
ifeq ("$(call PARSE_BOARD,$(BOARD_TAG),build.gnu0x)","true")
    CXXFLAGS_STD      += -std=gnu++0x
endif

ifeq ("$(call PARSE_BOARD,$(BOARD_TAG),build.elide_constructors)", "true")
    CXXFLAGS      += -felide-constructors
endif

CXXFLAGS += $(call PARSE_BOARD,$(BOARD_TAG),build.flags.common)
CXXFLAGS += $(call PARSE_BOARD,$(BOARD_TAG),build.flags.cpu)
CXXFLAGS += $(call PARSE_BOARD,$(BOARD_TAG),build.flags.defs)
CXXFLAGS += $(call PARSE_BOARD,$(BOARD_TAG),build.flags.cpp)

CFLAGS += $(call PARSE_BOARD,$(BOARD_TAG),build.flags.common)
CFLAGS += $(call PARSE_BOARD,$(BOARD_TAG),build.flags.cpu)
CFLAGS += $(call PARSE_BOARD,$(BOARD_TAG),build.flags.defs)

ASFLAGS += $(call PARSE_BOARD,$(BOARD_TAG),build.flags.common)
ASFLAGS += $(call PARSE_BOARD,$(BOARD_TAG),build.flags.cpu)
ASFLAGS += $(call PARSE_BOARD,$(BOARD_TAG),build.flags.defs)
ASFLAGS += $(call PARSE_BOARD,$(BOARD_TAG),build.flags.S)

LDFLAGS += $(call PARSE_BOARD,$(BOARD_TAG),build.flags.cpu)

AMCU := $(call PARSE_BOARD,$(BOARD_TAG),build.mcu)
LDFLAGS += -Wl,--gc-sections,--relax
LINKER_SCRIPTS ?= -T${ARDUINO_CORE_PATH}/${AMCU}.ld
OTHER_LIBS = $(call PARSE_BOARD,$(BOARD_TAG),build.flags.libs)

CPUFLAGS = $(call PARSE_BOARD,$(BOARD_TAG),build.flags.cpu)
# usually defined as per teensy31.build.mcu=mk20dx256 but that isn't valid switch
MCU := $(shell echo ${CPUFLAGS} | sed -n -e 's/.*-mcpu=\([a-zA-Z0-9_-]*\).*/\1/p')

########################################################################
# some fairly odd settings so that 'make upload' works
#
# may require additional patches for Windows support

do_upload: override get_monitor_port=""
AVRDUDE=@true
RESET_CMD = nohup $(ARDUINO_DIR)/hardware/tools/teensy_post_compile -board=$(BOARD_TAG) -tools=$(abspath $(ARDUINO_DIR)/hardware/tools) -path=$(abspath $(OBJDIR)) -file=$(TARGET) > /dev/null ; $(ARDUINO_DIR)/hardware/tools/teensy_reboot

########################################################################
# automatially include Arduino.mk for the user

include $(ARDMK_DIR)/Arduino.mk