dominic/Arduino-Makefile
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
Arduino-Makefile/arduino-mk/Arduino.mk
Sudar 6300679343 Revert "Make all executables overridable" 
If these executables are not overridden in the child makefile, then the
default values are not set properly in the master makefile.

This complicates the solution for #119 :(

This reverts commit 66eec82a3a.
2013-09-19 16:22:28 +05:30

1159 lines
38 KiB
Makefile
Raw Blame History

########################################################################
#
# Makefile for compiling Arduino sketches from command line
# System part (i.e. project independent)
#
# Copyright (C) 2012 Sudar <http://sudarmuthu.com>, based on
# - M J Oldfield work: https://github.com/mjoldfield/Arduino-Makefile
#
# Copyright (C) 2010,2011,2012 Martin Oldfield <m@mjo.tc>, based on
# work that is copyright Nicholas Zambetti, David A. Mellis & Hernando
# Barragan.
#
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as
# published by the Free Software Foundation; either version 2.1 of the
# License, or (at your option) any later version.
#
# Adapted from Arduino 0011 Makefile by M J Oldfield
#
# Original Arduino adaptation by mellis, eighthave, oli.keller
#
# Current version: 0.12.0
#
# Refer to HISTORY.md file for complete history of changes
#
########################################################################
#
# PATHS YOU NEED TO SET UP
#
# We need to worry about three different sorts of file:
#
# 1. Things which are included in this distribution e.g. ard-reset-arduino
# => ARDMK_DIR - Where the *.mk files are stored
# => ARDMK_PATH - Where the ard-reset-arduino script is stored
#
# 2. Things which are always in the Arduino distribution e.g.
# boards.txt, libraries, &c.
# => ARDUINO_DIR
#
# 3. Things which might be bundled with the Arduino distribution, but
# might come from the system. Most of the toolchain is like this:
# on Linux it's supplied by the system.
# => AVR_TOOLS_DIR
#
# Having set these three variables, we can work out the rest assuming
# that things are canonically arranged beneath the directories defined
# above.
#
# On the Mac you might want to set:
#
# ARDUINO_DIR = /Applications/Arduino.app/Contents/Resources/Java
# ARDMK_DIR = /usr/local
#
# On Linux, you might prefer:
#
# ARDUINO_DIR = /usr/share/arduino
# ARDMK_DIR = /usr
# AVR_TOOLS_DIR = /usr
#
# You can either set these up in the Makefile, or put them in your
# environment e.g. in your .bashrc
#
# If you don't specify these, we can try to guess, but that might not work
# or work the way you want it to.
#
# If you don't install the ard-reset-arduino binary to /usr/local/bin, but
# instead copy them to e.g. /home/mjo/arduino.mk/bin then set
# ARDMK_PATH = /home/mjo/arduino.mk/bin
#
# If you'd rather not see the configuration output, define ARDUINO_QUIET.
#
########################################################################
#
# DEPENDENCIES
#
# The Perl programs need a couple of libraries:
# Device::SerialPort
#
########################################################################
#
# STANDARD ARDUINO WORKFLOW
#
# Given a normal sketch directory, all you need to do is to create
# a small Makefile which defines a few things, and then includes this one.
#
# For example:
#
# ARDUINO_LIBS = Ethernet SPI
# BOARD_TAG = uno
# MONITOR_PORT = /dev/cu.usb*
#
# include /usr/share/arduino/Arduino.mk
#
# Hopefully these will be self-explanatory but in case they're not:
#
# ARDUINO_LIBS - A list of any libraries used by the sketch (we
# assume these are in $(ARDUINO_DIR)/hardware/libraries
# or your sketchbook's libraries directory)
#
# MONITOR_PORT - The port where the Arduino can be found (only needed
# when uploading)
#
# BOARD_TAG - The tag for the board e.g. uno or mega
# 'make show_boards' shows a list
#
# If you have your additional libraries relative to your source, rather
# than in your "sketchbook", also set USER_LIB_PATH, like this example:
#
# USER_LIB_PATH := $(realpath ../../libraries)
#
# If you've added the Arduino-Makefile repository to your git repo as a
# submodule (or other similar arrangement), you might have lines like this
# in your Makefile:
#
# ARDMK_DIR := $(realpath ../../tools/Arduino-Makefile)
# include $(ARDMK_DIR)/arduino-mk/Arduino.mk
#
# In any case, once this file has been created the typical workflow is just
#
# $ make upload
#
# All of the object files are created in the build-{BOARD_TAG} subdirectory
# All sources should be in the current directory and can include:
# - at most one .pde or .ino file which will be treated as C++ after
# the standard Arduino header and footer have been affixed.
# - any number of .c, .cpp, .s and .h files
#
# Included libraries are built in the build-{BOARD_TAG}/libs subdirectory.
#
# Besides make upload, there are a couple of other targets that are available.
# Do make help to get the complete list of targets and their description
#
########################################################################
#
# SERIAL MONITOR
#
# The serial monitor just invokes the GNU screen program with suitable
# options. For more information see screen (1) and search for
# 'character special device'.
#
# The really useful thing to know is that ^A-k gets you out!
#
# The fairly useful thing to know is that you can bind another key to
# escape too, by creating $HOME{.screenrc} containing e.g.
#
# bindkey ^C kill
#
# If you want to change the baudrate, just set MONITOR_BAUDRATE. If you
# don't set it, it tries to read from the sketch. If it couldn't read
# from the sketch, then it defaults to 9600 baud.
#
########################################################################
#
# ARDUINO WITH ISP
#
# You need to specify some details of your ISP programmer and might
# also need to specify the fuse values:
#
# ISP_PROG = stk500v2
# ISP_PORT = /dev/ttyACM0
#
# You might also need to set the fuse bits, but typically they'll be
# read from boards.txt, based on the BOARD_TAG variable:
#
# ISP_LOCK_FUSE_PRE = 0x3f
# ISP_LOCK_FUSE_POST = 0xcf
# ISP_HIGH_FUSE = 0xdf
# ISP_LOW_FUSE = 0xff
# ISP_EXT_FUSE = 0x01
#
# You can specify to also upload the EEPROM file:
# ISP_EEPROM = 1
#
# I think the fuses here are fine for uploading to the ATmega168
# without bootloader.
#
# To actually do this upload use the ispload target:
#
# make ispload
#
#
########################################################################
#
# ALTERNATIVE CORES
#
# To use alternative cores for platforms such as ATtiny, you need to
# specify a few more variables, depending on the core in use.
#
# The HLT (attiny-master) core can be used just by specifying
# ALTERNATE_CORE, assuming your core is in your ~/sketchbook/hardware
# directory. For example:
#
# ISP_PORT = /dev/ttyACM0
# BOARD_TAG = attiny85
# ALTERNATE_CORE = attiny-master
#
# To use the more complex arduino-tiny and TinyCore2 cores, you must
# also set ARDUINO_CORE_PATH and ARDUINO_VAR_PATH to the core
# directory, as these cores essentially replace the main Arduino core.
# For example:
#
# ISP_PORT = /dev/ttyACM0
# BOARD_TAG = attiny85at8
# ALTERNATE_CORE = arduino-tiny
# ARDUINO_VAR_PATH = ~/sketchbook/hardware/arduino-tiny/cores/tiny
# ARDUINO_CORE_PATH = ~/sketchbook/hardware/arduino-tiny/cores/tiny
#
# or....
#
# ISP_PORT = /dev/ttyACM0
# BOARD_TAG = attiny861at8
# ALTERNATE_CORE = tiny2
# ARDUINO_VAR_PATH = ~/sketchbook/hardware/tiny2/cores/tiny
# ARDUINO_CORE_PATH = ~/sketchbook/hardware/tiny2/cores/tiny
#
########################################################################
arduino_output =
# When output is not suppressed and we're in the top-level makefile,
# running for the first time (i.e., not after a restart after
# regenerating the dependency file), then output the configuration.
ifndef ARDUINO_QUIET
ifeq ($(MAKE_RESTARTS),)
ifeq ($(MAKELEVEL),0)
arduino_output = $(info $(1))
endif
endif
endif
########################################################################
# Makefile distribution path
ifndef ARDMK_DIR
# presume it's a level above the path to our own file
ARDMK_DIR := $(realpath $(dir $(realpath $(lastword $(MAKEFILE_LIST))))/..)
else
# show_config_variable macro is defined in Common.mk file and is not available yet.
# Let's define a variable to know that user specified ARDMK_DIR
ARDMK_DIR_MSG = USER
endif
ifneq ($(wildcard $(ARDMK_DIR)/arduino-mk/Common.mk),)
# git checkout
include $(ARDMK_DIR)/arduino-mk/Common.mk
else
ifneq ($(wildcard $(ARDMK_DIR)/Common.mk),)
# package install
include $(ARDMK_DIR)/Common.mk
endif
endif
# show_config_variable macro is available now. So let's print config details for ARDMK_DIR
ifndef ARDMK_DIR_MSG
$(call show_config_variable,ARDMK_DIR,[COMPUTED],(relative to $(notdir $(lastword $(MAKEFILE_LIST)))))
else
$(call show_config_variable,ARDMK_DIR,[USER])
endif
ifndef ARDMK_PATH
ARDMK_PATH = $(ARDMK_DIR)/bin
$(call show_config_variable,ARDMK_PATH,[COMPUTED],(relative to ARDMK_DIR))
else
$(call show_config_variable,ARDMK_PATH,[USER])
endif
########################################################################
# Arduino Directory
ifndef ARDUINO_DIR
AUTO_ARDUINO_DIR := $(firstword \
$(call dir_if_exists,/usr/share/arduino) \
$(call dir_if_exists,/Applications/Arduino.app/Contents/Resources/Java) )
ifdef AUTO_ARDUINO_DIR
ARDUINO_DIR = $(AUTO_ARDUINO_DIR)
$(call show_config_variable,ARDUINO_DIR,[AUTODETECTED])
else
echo $(error "ARDUINO_DIR is not defined")
endif
else
$(call show_config_variable,ARDUINO_DIR,[USER])
endif
########################################################################
# Default TARGET to pwd (ex Daniele Vergini)
ifndef TARGET
TARGET = $(notdir $(CURDIR))
endif
########################################################################
# Arduino version number
ifndef ARDUINO_VERSION
# Remove all the decimals, and right-pad with zeros, and finally grab the first 3 bytes.
# Works for 1.0 and 1.0.1
VERSION_FILE := $(ARDUINO_DIR)/lib/version.txt
AUTO_ARDUINO_VERSION := $(shell [ -e $(VERSION_FILE) ] && cat $(VERSION_FILE) | sed -e 's/^[0-9]://g' -e 's/[.]//g' -e 's/$$/0000/' | head -c3)
ifdef AUTO_ARDUINO_VERSION
ARDUINO_VERSION = $(AUTO_ARDUINO_VERSION)
$(call show_config_variable,ARDUINO_VERSION,[AUTODETECTED])
else
ARDUINO_VERSION = 100
$(call show_config_variable,ARDUINO_VERSION,[DEFAULT])
endif
else
$(call show_config_variable,ARDUINO_VERSION,[USER])
endif
########################################################################
# Arduino Sketchbook folder
ifndef ARDUINO_SKETCHBOOK
ifndef ARDUINO_PREFERENCES_PATH
AUTO_ARDUINO_PREFERENCES := $(firstword \
$(call dir_if_exists,$(HOME)/.arduino/preferences.txt) \
$(call dir_if_exists,$(HOME)/Library/Arduino/preferences.txt) )
ifdef AUTO_ARDUINO_PREFERENCES
ARDUINO_PREFERENCES_PATH = $(AUTO_ARDUINO_PREFERENCES)
$(call show_config_variable,ARDUINO_PREFERENCES_PATH,[AUTODETECTED])
endif
else
$(call show_config_variable,ARDUINO_PREFERENCES_PATH,[USER])
endif
ifneq ($(ARDUINO_PREFERENCES_PATH),)
ARDUINO_SKETCHBOOK = $(shell grep --max-count=1 --regexp="sketchbook.path=" \
$(ARDUINO_PREFERENCES_PATH) | \
sed -e 's/sketchbook.path=//' )
endif
ifneq ($(ARDUINO_SKETCHBOOK),)
$(call show_config_variable,ARDUINO_SKETCHBOOK,[AUTODETECTED],(from arduino preferences file))
else
ARDUINO_SKETCHBOOK = $(HOME)/sketchbook
$(call show_config_variable,ARDUINO_SKETCHBOOK,[DEFAULT])
endif
else
$(call show_config_variable,ARDUINO_SKETCHBOOK)
endif
########################################################################
# Arduino and system paths
ifndef CC_NAME
CC_NAME = avr-gcc
endif
ifndef CXX_NAME
CXX_NAME = avr-g++
endif
ifndef OBJCOPY_NAME
OBJCOPY_NAME = avr-objcopy
endif
ifndef OBJDUMP_NAME
OBJDUMP_NAME = avr-objdump
endif
ifndef AR_NAME
AR_NAME = avr-ar
endif
ifndef SIZE_NAME
SIZE_NAME = avr-size
endif
ifndef NM_NAME
NM_NAME = avr-nm
endif
ifndef AVR_TOOLS_DIR
BUNDLED_AVR_TOOLS_DIR := $(call dir_if_exists,$(ARDUINO_DIR)/hardware/tools/avr)
ifdef BUNDLED_AVR_TOOLS_DIR
AVR_TOOLS_DIR = $(BUNDLED_AVR_TOOLS_DIR)
$(call show_config_variable,AVR_TOOLS_DIR,[BUNDLED],(in Arduino distribution))
# In Linux distribution of Arduino, the path to avrdude and avrdude.conf are different
# More details at https://github.com/sudar/Arduino-Makefile/issues/48 and
# https://groups.google.com/a/arduino.cc/d/msg/developers/D_m97jGr8Xs/uQTt28KO_8oJ
ifeq ($(CURRENT_OS),LINUX)
ifndef AVRDUDE
AVRDUDE = $(AVR_TOOLS_DIR)/../avrdude
endif
ifndef AVRDUDE_CONF
AVRDUDE_CONF = $(AVR_TOOLS_DIR)/../avrdude.conf
endif
else
ifndef AVRDUDE_CONF
AVRDUDE_CONF = $(AVR_TOOLS_DIR)/etc/avrdude.conf
endif
endif
else
SYSTEMPATH_AVR_TOOLS_DIR := $(call dir_if_exists,$(abspath $(dir $(shell which $(CC_NAME)))/..))
ifdef SYSTEMPATH_AVR_TOOLS_DIR
AVR_TOOLS_DIR = $(SYSTEMPATH_AVR_TOOLS_DIR)
$(call show_config_variable,AVR_TOOLS_DIR,[AUTODETECTED],(found in $$PATH))
else
echo $(error No AVR tools directory found)
endif # SYSTEMPATH_AVR_TOOLS_DIR
endif # BUNDLED_AVR_TOOLS_DIR
else
$(call show_config_variable,AVR_TOOLS_DIR,[USER])
endif #ndef AVR_TOOLS_DIR
ifndef AVR_TOOLS_PATH
AVR_TOOLS_PATH = $(AVR_TOOLS_DIR)/bin
endif
ARDUINO_LIB_PATH = $(ARDUINO_DIR)/libraries
$(call show_config_variable,ARDUINO_LIB_PATH,[COMPUTED],(from ARDUINO_DIR))
ifndef ARDUINO_CORE_PATH
ARDUINO_CORE_PATH = $(ARDUINO_DIR)/hardware/arduino/cores/arduino
$(call show_config_variable,ARDUINO_CORE_PATH,[DEFAULT])
else
$(call show_config_variable,ARDUINO_CORE_PATH,[USER])
endif
# Third party hardware and core like ATtiny or ATmega 16
ifdef ALTERNATE_CORE
$(call show_config_variable,ALTERNATE_CORE,[USER])
ifndef ALTERNATE_CORE_PATH
ALTERNATE_CORE_PATH = $(ARDUINO_SKETCHBOOK)/hardware/$(ALTERNATE_CORE)
endif
endif
ifdef ALTERNATE_CORE_PATH
ifdef ALTERNATE_CORE
$(call show_config_variable,ALTERNATE_CORE_PATH,[COMPUTED], (from ARDUINO_SKETCHBOOK and ALTERNATE_CORE))
else
$(call show_config_variable,ALTERNATE_CORE_PATH,[USER])
endif
ifndef ARDUINO_VAR_PATH
ARDUINO_VAR_PATH = $(ALTERNATE_CORE_PATH)/variants
$(call show_config_variable,ARDUINO_VAR_PATH,[COMPUTED],(from ALTERNATE_CORE_PATH))
endif
ifndef BOARDS_TXT
BOARDS_TXT = $(ALTERNATE_CORE_PATH)/boards.txt
$(call show_config_variable,BOARDS_TXT,[COMPUTED],(from ALTERNATE_CORE_PATH))
endif
else
ifndef ARDUINO_VAR_PATH
ARDUINO_VAR_PATH = $(ARDUINO_DIR)/hardware/arduino/variants
$(call show_config_variable,ARDUINO_VAR_PATH,[COMPUTED],(from ARDUINO_DIR))
else
$(call show_config_variable,ARDUINO_VAR_PATH,[USER])
endif
ifndef BOARDS_TXT
BOARDS_TXT = $(ARDUINO_DIR)/hardware/arduino/boards.txt
$(call show_config_variable,BOARDS_TXT,[COMPUTED],(from ARDUINO_DIR))
else
$(call show_config_variable,BOARDS_TXT,[USER])
endif
endif
########################################################################
# Miscellaneous
ifndef USER_LIB_PATH
USER_LIB_PATH = $(ARDUINO_SKETCHBOOK)/libraries
$(call show_config_variable,USER_LIB_PATH,[DEFAULT],(in user sketchbook))
else
$(call show_config_variable,USER_LIB_PATH,[USER])
endif
########################################################################
# boards.txt parsing
ifndef BOARD_TAG
BOARD_TAG = uno
$(call show_config_variable,BOARD_TAG,[DEFAULT])
else
# Strip the board tag of any extra whitespace, since it was causing the makefile to fail
# https://github.com/sudar/Arduino-Makefile/issues/57
BOARD_TAG := $(strip $(BOARD_TAG))
$(call show_config_variable,BOARD_TAG,[USER])
endif
ifndef PARSE_BOARD
# result = $(call READ_BOARD_TXT, 'boardname', 'parameter')
PARSE_BOARD = $(shell grep $(1).$(2) $(BOARDS_TXT) | cut -d = -f 2 )
endif
# If NO_CORE is set, then we don't have to parse boards.txt file
# But the user might have to define MCU, F_CPU etc
ifeq ($(strip $(NO_CORE)),)
# Which variant ? This affects the include path
ifndef VARIANT
VARIANT = $(call PARSE_BOARD,$(BOARD_TAG),build.variant)
endif
# see if we are a caterina device like leonardo or micro
CATERINA = $(findstring caterina,$(call PARSE_BOARD,$(BOARD_TAG),bootloader.path))
# processor stuff
ifndef MCU
MCU = $(call PARSE_BOARD,$(BOARD_TAG),build.mcu)
endif
ifndef F_CPU
F_CPU = $(call PARSE_BOARD,$(BOARD_TAG),build.f_cpu)
endif
ifneq ($(CATERINA),)
# USB IDs for the caterina devices like leonardo or micro
ifndef USB_VID
USB_VID = $(call PARSE_BOARD,$(BOARD_TAG),build.vid)
endif
ifndef USB_PID
USB_PID = $(call PARSE_BOARD,$(BOARD_TAG),build.pid)
endif
endif
# normal programming info
ifndef AVRDUDE_ARD_PROGRAMMER
AVRDUDE_ARD_PROGRAMMER = $(call PARSE_BOARD,$(BOARD_TAG),upload.protocol)
endif
ifndef AVRDUDE_ARD_BAUDRATE
AVRDUDE_ARD_BAUDRATE = $(call PARSE_BOARD,$(BOARD_TAG),upload.speed)
endif
# fuses if you're using e.g. ISP
ifndef ISP_LOCK_FUSE_PRE
ISP_LOCK_FUSE_PRE = $(call PARSE_BOARD,$(BOARD_TAG),bootloader.unlock_bits)
endif
ifndef ISP_HIGH_FUSE
ISP_HIGH_FUSE = $(call PARSE_BOARD,$(BOARD_TAG),bootloader.high_fuses)
endif
ifndef ISP_LOW_FUSE
ISP_LOW_FUSE = $(call PARSE_BOARD,$(BOARD_TAG),bootloader.low_fuses)
endif
ifndef ISP_EXT_FUSE
ISP_EXT_FUSE = $(call PARSE_BOARD,$(BOARD_TAG),bootloader.extended_fuses)
endif
ifndef ISP_LOCK_FUSE_POST
ISP_LOCK_FUSE_POST = $(call PARSE_BOARD,$(BOARD_TAG),bootloader.lock_bits)
endif
ifndef HEX_MAXIMUM_SIZE
HEX_MAXIMUM_SIZE = $(call PARSE_BOARD,$(BOARD_TAG),upload.maximum_size)
endif
endif
# Everything gets built in here (include BOARD_TAG now)
ifndef OBJDIR
OBJDIR = build-$(BOARD_TAG)
$(call show_config_variable,OBJDIR,[COMPUTED],(from BOARD_TAG))
else
$(call show_config_variable,OBJDIR,[USER])
endif
########################################################################
# Reset
ifndef RESET_CMD
ifneq ($(CATERINA),)
RESET_CMD = $(ARDMK_PATH)/ard-reset-arduino --caterina \
$(ARD_RESET_OPTS) $(call get_monitor_port)
else
RESET_CMD = $(ARDMK_PATH)/ard-reset-arduino \
$(ARD_RESET_OPTS) $(call get_monitor_port)
endif
endif
ifneq ($(CATERINA),)
ERROR_ON_CATERINA = $(error On $(BOARD_TAG), raw_xxx operation is not supported)
else
ERROR_ON_CATERINA =
endif
########################################################################
# Local sources
LOCAL_C_SRCS ?= $(wildcard *.c)
LOCAL_CPP_SRCS ?= $(wildcard *.cpp)
LOCAL_CC_SRCS ?= $(wildcard *.cc)
LOCAL_PDE_SRCS ?= $(wildcard *.pde)
LOCAL_INO_SRCS ?= $(wildcard *.ino)
LOCAL_AS_SRCS ?= $(wildcard *.S)
LOCAL_SRCS = $(LOCAL_C_SRCS) $(LOCAL_CPP_SRCS) \
$(LOCAL_CC_SRCS) $(LOCAL_PDE_SRCS) \
$(LOCAL_INO_SRCS) $(LOCAL_AS_SRCS)
LOCAL_OBJ_FILES = $(LOCAL_C_SRCS:.c=.o) $(LOCAL_CPP_SRCS:.cpp=.o) \
$(LOCAL_CC_SRCS:.cc=.o) $(LOCAL_PDE_SRCS:.pde=.o) \
$(LOCAL_INO_SRCS:.ino=.o) $(LOCAL_AS_SRCS:.S=.o)
LOCAL_OBJS = $(patsubst %,$(OBJDIR)/%,$(LOCAL_OBJ_FILES))
ifeq ($(words $(LOCAL_SRCS)), 0)
$(error Atleast one source file (*.ino, *.pde, *.cpp, *c, *cc, *.S) is needed)
endif
ifeq ($(strip $(NO_CORE)),)
# Ideally, this should just check if there are more than one file
ifneq ($(words $(LOCAL_PDE_SRCS) $(LOCAL_INO_SRCS)), 1)
ifeq ($(words $(LOCAL_PDE_SRCS) $(LOCAL_INO_SRCS)), 0)
$(call show_config_info,No .pde or .ino files found. If you are compiling .c or .cpp files then you need to explicitly include Arduino header files)
else
#TODO: Support more than one file. https://github.com/sudar/Arduino-Makefile/issues/49
$(error Need exactly one .pde or .ino file. This makefile doesn't support multiple .ino/.pde files yet)
endif
endif
endif
# core sources
ifeq ($(strip $(NO_CORE)),)
ifdef ARDUINO_CORE_PATH
CORE_C_SRCS = $(wildcard $(ARDUINO_CORE_PATH)/*.c)
CORE_CPP_SRCS = $(wildcard $(ARDUINO_CORE_PATH)/*.cpp)
ifneq ($(strip $(NO_CORE_MAIN_CPP)),)
CORE_CPP_SRCS := $(filter-out %main.cpp, $(CORE_CPP_SRCS))
$(call show_config_info,NO_CORE_MAIN_CPP set so core library will not include main.cpp,[MANUAL])
endif
CORE_OBJ_FILES = $(CORE_C_SRCS:.c=.o) $(CORE_CPP_SRCS:.cpp=.o)
CORE_OBJS = $(patsubst $(ARDUINO_CORE_PATH)/%, \
$(OBJDIR)/%,$(CORE_OBJ_FILES))
endif
else
$(call show_config_info,NO_CORE set so core library will not be built,[MANUAL])
endif
########################################################################
# Determine ARDUINO_LIBS automatically
ifndef ARDUINO_LIBS
# automatically determine included libraries
ARDUINO_LIBS += $(filter $(notdir $(wildcard $(ARDUINO_DIR)/libraries/*)), \
$(shell sed -ne "s/^ *\# *include *[<\"]\(.*\)\.h[>\"]/\1/p" $(LOCAL_SRCS)))
ARDUINO_LIBS += $(filter $(notdir $(wildcard $(ARDUINO_SKETCHBOOK)/libraries/*)), \
$(shell sed -ne "s/^ *\# *include *[<\"]\(.*\)\.h[>\"]/\1/p" $(LOCAL_SRCS)))
endif
########################################################################
# Serial monitor (just a screen wrapper)
# Quite how to construct the monitor command seems intimately tied
# to the command we're using (here screen). So, read the screen docs
# for more information (search for 'character special device').
ifeq ($(strip $(NO_CORE)),)
ifndef MONITOR_BAUDRATE
ifeq ($(words $(LOCAL_PDE_SRCS) $(LOCAL_INO_SRCS)), 1)
SPEED = $(shell egrep -h 'Serial.begin\([0-9]+\)' $(LOCAL_PDE_SRCS) $(LOCAL_INO_SRCS) | sed -e 's/[^0-9]//g'| head -n1)
MONITOR_BAUDRATE = $(findstring $(SPEED),300 1200 2400 4800 9600 14400 19200 28800 38400 57600 115200)
endif
ifeq ($(MONITOR_BAUDRATE),)
MONITOR_BAUDRATE = 9600
$(call show_config_variable,MONITOR_BAUDRATE,[ASSUMED])
else
$(call show_config_variable,MONITOR_BAUDRATE,[DETECTED], (in sketch))
endif
else
$(call show_config_variable,MONITOR_BAUDRATE, [USER])
endif
ifndef MONITOR_CMD
MONITOR_CMD = screen
endif
endif
########################################################################
# Include file to use for old .pde files
ifndef ARDUINO_HEADER
# We should check for Arduino version, if the file is .pde because a
# .pde file might be used in Arduino 1.0
ifeq ($(shell expr $(ARDUINO_VERSION) '<' 100), 1)
ARDUINO_HEADER=WProgram.h
else
ARDUINO_HEADER=Arduino.h
endif
endif
########################################################################
# Rules for making stuff
# The name of the main targets
TARGET_HEX = $(OBJDIR)/$(TARGET).hex
TARGET_ELF = $(OBJDIR)/$(TARGET).elf
TARGET_EEP = $(OBJDIR)/$(TARGET).eep
TARGETS = $(OBJDIR)/$(TARGET).*
CORE_LIB = $(OBJDIR)/libcore.a
# Names of executables
CC = $(AVR_TOOLS_PATH)/$(CC_NAME)
CXX = $(AVR_TOOLS_PATH)/$(CXX_NAME)
AS = $(AVR_TOOLS_PATH)/$(AS_NAME)
OBJCOPY = $(AVR_TOOLS_PATH)/$(OBJCOPY_NAME)
OBJDUMP = $(AVR_TOOLS_PATH)/$(OBJDUMP_NAME)
AR = $(AVR_TOOLS_PATH)/$(AR_NAME)
SIZE = $(AVR_TOOLS_PATH)/$(SIZE_NAME)
NM = $(AVR_TOOLS_PATH)/$(NM_NAME)
REMOVE = rm -rf
MV = mv -f
CAT = cat
ECHO = echo
MKDIR = mkdir -p
# General arguments
USER_LIBS = $(wildcard $(patsubst %,$(USER_LIB_PATH)/%,$(ARDUINO_LIBS)))
USER_LIB_NAMES = $(patsubst $(USER_LIB_PATH)/%,%,$(USER_LIBS))
# Let user libraries override system ones.
SYS_LIBS = $(wildcard $(patsubst %,$(ARDUINO_LIB_PATH)/%,$(filter-out $(USER_LIB_NAMES),$(ARDUINO_LIBS))))
SYS_LIB_NAMES = $(patsubst $(ARDUINO_LIB_PATH)/%,%,$(SYS_LIBS))
# Error here if any are missing.
LIBS_NOT_FOUND = $(filter-out $(USER_LIB_NAMES) $(SYS_LIB_NAMES),$(ARDUINO_LIBS))
ifneq (,$(strip $(LIBS_NOT_FOUND)))
$(error The following libraries specified in ARDUINO_LIBS could not be found (searched USER_LIB_PATH and ARDUINO_LIB_PATH): $(LIBS_NOT_FOUND))
endif
SYS_LIBS := $(wildcard $(SYS_LIBS) $(addsuffix /utility,$(SYS_LIBS)))
USER_LIBS := $(wildcard $(USER_LIBS) $(addsuffix /utility,$(USER_LIBS)))
SYS_INCLUDES = $(patsubst %,-I%,$(SYS_LIBS))
USER_INCLUDES = $(patsubst %,-I%,$(USER_LIBS))
LIB_C_SRCS = $(wildcard $(patsubst %,%/*.c,$(SYS_LIBS)))
LIB_CPP_SRCS = $(wildcard $(patsubst %,%/*.cpp,$(SYS_LIBS)))
USER_LIB_CPP_SRCS = $(wildcard $(patsubst %,%/*.cpp,$(USER_LIBS)))
USER_LIB_C_SRCS = $(wildcard $(patsubst %,%/*.c,$(USER_LIBS)))
LIB_OBJS = $(patsubst $(ARDUINO_LIB_PATH)/%.c,$(OBJDIR)/libs/%.o,$(LIB_C_SRCS)) \
$(patsubst $(ARDUINO_LIB_PATH)/%.cpp,$(OBJDIR)/libs/%.o,$(LIB_CPP_SRCS))
USER_LIB_OBJS = $(patsubst $(USER_LIB_PATH)/%.cpp,$(OBJDIR)/libs/%.o,$(USER_LIB_CPP_SRCS)) \
$(patsubst $(USER_LIB_PATH)/%.c,$(OBJDIR)/libs/%.o,$(USER_LIB_C_SRCS))
# Dependency files
DEPS = $(LOCAL_OBJS:.o=.d) $(LIB_OBJS:.o=.d) $(USER_LIB_OBJS:.o=.d) $(CORE_OBJS:.o=.d)
# Optimization level for the compiler.
# You can get the list of options at http://www.nongnu.org/avr-libc/user-manual/using_tools.html#gcc_optO
# Also read http://www.nongnu.org/avr-libc/user-manual/FAQ.html#faq_optflags
ifndef OPTIMIZATION_LEVEL
OPTIMIZATION_LEVEL=s
$(call show_config_variable,OPTIMIZATION_LEVEL,[DEFAULT])
else
$(call show_config_variable,OPTIMIZATION_LEVEL,[USER])
endif
ifndef MCU_FLAG_NAME
MCU_FLAG_NAME = mmcu
$(call show_config_variable,MCU_FLAG_NAME,[DEFAULT])
else
$(call show_config_variable,MCU_FLAG_NAME,[USER])
endif
# Using += instead of =, so that CPPFLAGS can be set per sketch level
CPPFLAGS += -$(MCU_FLAG_NAME)=$(MCU) -DF_CPU=$(F_CPU) -DARDUINO=$(ARDUINO_VERSION) \
-I. -I$(ARDUINO_CORE_PATH) -I$(ARDUINO_VAR_PATH)/$(VARIANT) \
$(SYS_INCLUDES) $(USER_INCLUDES) -Wall -ffunction-sections \
-fdata-sections
ifdef DEBUG
CPPFLAGS += -O0 -g
else
CPPFLAGS += -O$(OPTIMIZATION_LEVEL)
endif
# USB IDs for the Caterina devices like leonardo or micro
ifneq ($(CATERINA),)
CPPFLAGS += -DUSB_VID=$(USB_VID) -DUSB_PID=$(USB_PID)
endif
ifndef CFLAGS_STD
CFLAGS_STD = -std=gnu99
$(call show_config_variable,CFLAGS_STD,[DEFAULT])
else
$(call show_config_variable,CFLAGS_STD,[USER])
endif
CFLAGS += $(EXTRA_FLAGS) $(EXTRA_CFLAGS)
CXXFLAGS += -fno-exceptions $(EXTRA_FLAGS) $(EXTRA_CXXFLAGS)
ASFLAGS += -$(MCU_FLAG_NAME)=$(MCU) -I. -x assembler-with-cpp
LDFLAGS += -$(MCU_FLAG_NAME)=$(MCU) -Wl,--gc-sections -O$(OPTIMIZATION_LEVEL) $(EXTRA_FLAGS) $(EXTRA_CXXFLAGS) $(EXTRA_LDFLAGS)
SIZEFLAGS ?= --mcu=$(MCU) -C
# for backwards compatibility, grab ARDUINO_PORT if the user has it set
MONITOR_PORT ?= $(ARDUINO_PORT)
# Returns the Arduino port (first wildcard expansion) if it exists, otherwise it errors.
get_monitor_port = $(if $(wildcard $(MONITOR_PORT)),$(firstword $(wildcard $(MONITOR_PORT))),$(error Arduino port $(MONITOR_PORT) not found!))
# Returns the ISP port (first wildcard expansion) if it exists, otherwise it errors.
get_isp_port = $(if $(wildcard $(ISP_PORT)),$(firstword $(wildcard $(ISP_PORT))),$(error ISP port $(ISP_PORT) not found!))
# Command for avr_size: do $(call avr_size,elffile,hexfile)
ifneq (,$(findstring AVR,$(shell $(SIZE) --help)))
# We have a patched version of binutils that mentions AVR - pass the MCU
# and the elf to get nice output.
avr_size = $(SIZE) $(SIZEFLAGS) --format=avr $(1)
$(call show_config_info,Size utility: AVR-aware for enhanced output,[AUTODETECTED])
else
# We have a plain-old binutils version - just give it the hex.
avr_size = $(SIZE) $(2)
$(call show_config_info,Size utility: Basic (not AVR-aware),[AUTODETECTED])
endif
ifneq (,$(strip $(ARDUINO_LIBS)))
$(call arduino_output,-)
$(call show_config_info,ARDUINO_LIBS =)
endif
ifneq (,$(strip $(USER_LIB_NAMES)))
$(foreach lib,$(USER_LIB_NAMES),$(call show_config_info, $(lib),[USER]))
endif
ifneq (,$(strip $(SYS_LIB_NAMES)))
$(foreach lib,$(SYS_LIB_NAMES),$(call show_config_info, $(lib),[SYSTEM]))
endif
# end of config output
$(call show_separator)
# Implicit rules for building everything (needed to get everything in
# the right directory)
#
# Rather than mess around with VPATH there are quasi-duplicate rules
# here for building e.g. a system C++ file and a local C++
# file. Besides making things simpler now, this would also make it
# easy to change the build options in future
# library sources
$(OBJDIR)/libs/%.o: $(ARDUINO_LIB_PATH)/%.c
@$(MKDIR) $(dir $@)
$(CC) -MMD -c $(CPPFLAGS) $(CFLAGS) $< -o $@
$(OBJDIR)/libs/%.o: $(ARDUINO_LIB_PATH)/%.cpp
@$(MKDIR) $(dir $@)
$(CC) -MMD -c $(CPPFLAGS) $(CXXFLAGS) $< -o $@
$(OBJDIR)/libs/%.o: $(USER_LIB_PATH)/%.cpp
@$(MKDIR) $(dir $@)
$(CC) -MMD -c $(CPPFLAGS) $(CFLAGS) $< -o $@
$(OBJDIR)/libs/%.o: $(USER_LIB_PATH)/%.c
@$(MKDIR) $(dir $@)
$(CC) -MMD -c $(CPPFLAGS) $(CFLAGS) $< -o $@
ifdef COMMON_DEPS
COMMON_DEPS := $(COMMON_DEPS) Makefile
else
COMMON_DEPS := Makefile
endif
# normal local sources
$(OBJDIR)/%.o: %.c $(COMMON_DEPS) | $(OBJDIR)
@$(MKDIR) $(dir $@)
$(CC) -MMD -c $(CPPFLAGS) $(CFLAGS) $< -o $@
$(OBJDIR)/%.o: %.cc $(COMMON_DEPS) | $(OBJDIR)
@$(MKDIR) $(dir $@)
$(CXX) -MMD -c $(CPPFLAGS) $(CXXFLAGS) $< -o $@
$(OBJDIR)/%.o: %.cpp $(COMMON_DEPS) | $(OBJDIR)
@$(MKDIR) $(dir $@)
$(CXX) -MMD -c $(CPPFLAGS) $(CXXFLAGS) $< -o $@
$(OBJDIR)/%.o: %.S $(COMMON_DEPS) | $(OBJDIR)
@$(MKDIR) $(dir $@)
$(CC) -MMD -c $(CPPFLAGS) $(ASFLAGS) $< -o $@
$(OBJDIR)/%.o: %.s $(COMMON_DEPS) | $(OBJDIR)
@$(MKDIR) $(dir $@)
$(CC) -c $(CPPFLAGS) $(ASFLAGS) $< -o $@
# the pde -> o file
$(OBJDIR)/%.o: %.pde $(COMMON_DEPS) | $(OBJDIR)
@$(MKDIR) $(dir $@)
$(CXX) -x c++ -include $(ARDUINO_HEADER) -MMD -c $(CPPFLAGS) $(CXXFLAGS) $< -o $@
# the ino -> o file
$(OBJDIR)/%.o: %.ino $(COMMON_DEPS) | $(OBJDIR)
@$(MKDIR) $(dir $@)
$(CXX) -x c++ -include Arduino.h -MMD -c $(CPPFLAGS) $(CXXFLAGS) $< -o $@
# generated assembly
$(OBJDIR)/%.s: %.pde $(COMMON_DEPS) | $(OBJDIR)
@$(MKDIR) $(dir $@)
$(CXX) -x c++ -include $(ARDUINO_HEADER) -MMD -S -fverbose-asm $(CPPFLAGS) $(CXXFLAGS) $< -o $@
$(OBJDIR)/%.s: %.ino $(COMMON_DEPS) | $(OBJDIR)
@$(MKDIR) $(dir $@)
$(CXX) -x c++ -include Arduino.h -MMD -S -fverbose-asm $(CPPFLAGS) $(CXXFLAGS) $< -o $@
#$(OBJDIR)/%.lst: $(OBJDIR)/%.s
# $(AS) -$(MCU_FLAG_NAME)=$(MCU) -alhnd $< > $@
# core files
$(OBJDIR)/%.o: $(ARDUINO_CORE_PATH)/%.c $(COMMON_DEPS) | $(OBJDIR)
@$(MKDIR) $(dir $@)
$(CC) -MMD -c $(CPPFLAGS) $(CFLAGS) $< -o $@
$(OBJDIR)/%.o: $(ARDUINO_CORE_PATH)/%.cpp $(COMMON_DEPS) | $(OBJDIR)
@$(MKDIR) $(dir $@)
$(CXX) -MMD -c $(CPPFLAGS) $(CXXFLAGS) $< -o $@
# various object conversions
$(OBJDIR)/%.hex: $(OBJDIR)/%.elf $(COMMON_DEPS)
@$(MKDIR) $(dir $@)
$(OBJCOPY) -O ihex -R .eeprom $< $@
@$(ECHO)
$(call avr_size,$<,$@)
ifneq ($(strip $(HEX_MAXIMUM_SIZE)),)
@if [ `$(SIZE) $@ | awk 'FNR == 2 {print $$2}'` -le $(HEX_MAXIMUM_SIZE) ]; then touch $@.sizeok; fi
else
@$(ECHO) Maximum flash memory of $(BOARD_TAG) is not specified. Make sure the size of $@ is less than $(BOARD_TAG)\'s flash memory
@touch $@.sizeok
endif
$(OBJDIR)/%.eep: $(OBJDIR)/%.elf $(COMMON_DEPS)
@$(MKDIR) $(dir $@)
-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
--change-section-lma .eeprom=0 -O ihex $< $@
$(OBJDIR)/%.lss: $(OBJDIR)/%.elf $(COMMON_DEPS)
@$(MKDIR) $(dir $@)
$(OBJDUMP) -h --source --demangle --wide $< > $@
$(OBJDIR)/%.sym: $(OBJDIR)/%.elf $(COMMON_DEPS)
@$(MKDIR) $(dir $@)
$(NM) --size-sort --demangle --reverse-sort --line-numbers $< > $@
########################################################################
# Avrdude
# If avrdude is installed separately, it can find its own config file
ifndef AVRDUDE
AVRDUDE = $(AVR_TOOLS_PATH)/avrdude
endif
# Default avrdude options. -V Do not verify, -q - suppress progress output
ifndef AVRDUDE_OPTS
AVRDUDE_OPTS = -q -V
endif
AVRDUDE_COM_OPTS = $(AVRDUDE_OPTS) -p $(MCU)
ifdef AVRDUDE_CONF
AVRDUDE_COM_OPTS += -C $(AVRDUDE_CONF)
endif
AVRDUDE_ARD_OPTS = -c $(AVRDUDE_ARD_PROGRAMMER) -b $(AVRDUDE_ARD_BAUDRATE) -P $(call get_monitor_port)
ifndef ISP_PROG
ISP_PROG = stk500v1
endif
ifndef AVRDUDE_ISP_BAUDRATE
AVRDUDE_ISP_BAUDRATE = 19200
endif
# Pre fuse settings
ifndef AVRDUDE_ISP_FUSES_PRE
ifneq ($(strip $(ISP_LOCK_FUSE_PRE)),)
AVRDUDE_ISP_FUSES_PRE += -U lock:w:$(ISP_LOCK_FUSE_PRE):m
endif
ifneq ($(strip $(ISP_HIGH_FUSE)),)
AVRDUDE_ISP_FUSES_PRE += -U hfuse:w:$(ISP_HIGH_FUSE):m
endif
ifneq ($(strip $(ISP_LOW_FUSE)),)
AVRDUDE_ISP_FUSES_PRE += -U lfuse:w:$(ISP_LOW_FUSE):m
endif
ifneq ($(strip $(ISP_EXT_FUSE)),)
AVRDUDE_ISP_FUSES_PRE += -U efuse:w:$(ISP_EXT_FUSE):m
endif
endif
# Post fuse settings
ifndef AVRDUDE_ISP_FUSES_POST
ifneq ($(strip $(ISP_LOCK_FUSE_POST)),)
AVRDUDE_ISP_FUSES_POST += -U lock:w:$(ISP_LOCK_FUSE_POST):m
endif
endif
AVRDUDE_ISP_OPTS = -c $(ISP_PROG) -b $(AVRDUDE_ISP_BAUDRATE) -P $(call get_isp_port)
ifndef ISP_EEPROM
ISP_EEPROM = 0
endif
AVRDUDE_UPLOAD_HEX = -U flash:w:$(TARGET_HEX):i
AVRDUDE_UPLOAD_EEP = -U eeprom:w:$(TARGET_EEP):i
AVRDUDE_ISPLOAD_OPTS = $(AVRDUDE_UPLOAD_HEX)
ifneq ($(ISP_EEPROM), 0)
AVRDUDE_ISPLOAD_OPTS += $(AVRDUDE_UPLOAD_EEP)
endif
########################################################################
# Explicit targets start here
all: $(TARGET_EEP) $(TARGET_HEX)
# Rule to create $(OBJDIR) automatically. All rules with recipes that
# create a file within it, but do not already depend on a file within it
# should depend on this rule. They should use a "order-only
# prerequisite" (e.g., put "| $(OBJDIR)" at the end of the prerequisite
# list) to prevent remaking the target when any file in the directory
# changes.
$(OBJDIR):
$(MKDIR) $(OBJDIR)
$(TARGET_ELF): $(LOCAL_OBJS) $(CORE_LIB) $(OTHER_OBJS)
$(CC) $(LDFLAGS) -o $@ $(LOCAL_OBJS) $(CORE_LIB) $(OTHER_OBJS) -lc -lm
$(CORE_LIB): $(CORE_OBJS) $(LIB_OBJS) $(USER_LIB_OBJS)
$(AR) rcs $@ $(CORE_OBJS) $(LIB_OBJS) $(USER_LIB_OBJS)
error_on_caterina:
$(ERROR_ON_CATERINA)
# Use submake so we can guarantee the reset happens
# before the upload, even with make -j
upload: $(TARGET_HEX) verify_size
$(MAKE) reset
$(MAKE) do_upload
raw_upload: $(TARGET_HEX) verify_size
$(MAKE) error_on_caterina
$(MAKE) do_upload
do_upload:
$(AVRDUDE) $(AVRDUDE_COM_OPTS) $(AVRDUDE_ARD_OPTS) \
$(AVRDUDE_UPLOAD_HEX)
do_eeprom: $(TARGET_EEP) $(TARGET_HEX)
$(AVRDUDE) $(AVRDUDE_COM_OPTS) $(AVRDUDE_ARD_OPTS) \
$(AVRDUDE_UPLOAD_EEP)
eeprom: $(TARGET_HEX) verify_size
$(MAKE) reset
$(MAKE) do_eeprom
raw_eeprom: $(TARGET_HEX) verify_size
$(MAKE) error_on_caterina
$(MAKE) do_eeprom
reset:
$(call arduino_output,Resetting Arduino...)
$(RESET_CMD)
# stty on MacOS likes -F, but on Debian it likes -f redirecting
# stdin/out appears to work but generates a spurious error on MacOS at
# least. Perhaps it would be better to just do it in perl ?
reset_stty:
for STTYF in 'stty -F' 'stty --file' 'stty -f' 'stty <' ; \
do $$STTYF /dev/tty >/dev/null 2>&1 && break ; \
done ; \
$$STTYF $(call get_monitor_port) hupcl ; \
(sleep 0.1 2>/dev/null || sleep 1) ; \
$$STTYF $(call get_monitor_port) -hupcl
ispload: $(TARGET_EEP) $(TARGET_HEX) verify_size
ifdef AVRDUDE_ISP_FUSES_PRE
$(AVRDUDE) $(AVRDUDE_COM_OPTS) $(AVRDUDE_ISP_OPTS) -e $(AVRDUDE_ISP_FUSES_PRE)
endif
$(AVRDUDE) $(AVRDUDE_COM_OPTS) $(AVRDUDE_ISP_OPTS) \
$(AVRDUDE_ISPLOAD_OPTS)
ifdef AVRDUDE_ISP_FUSES_POST
$(AVRDUDE) $(AVRDUDE_COM_OPTS) $(AVRDUDE_ISP_OPTS) $(AVRDUDE_ISP_FUSES_POST)
endif
clean:
$(REMOVE) $(LOCAL_OBJS) $(CORE_OBJS) $(LIB_OBJS) $(CORE_LIB) $(TARGETS) $(DEPS) $(USER_LIB_OBJS) ${OBJDIR}
size: $(TARGET_HEX)
$(call avr_size,$(TARGET_ELF),$(TARGET_HEX))
show_boards:
@cat $(BOARDS_TXT) | grep -E "^[[:alnum:]]" | cut -d . -f 1 | uniq
monitor:
$(MONITOR_CMD) $(call get_monitor_port) $(MONITOR_BAUDRATE)
disasm: $(OBJDIR)/$(TARGET).lss
@$(ECHO) The compiled ELF file has been disassembled to $(OBJDIR)/$(TARGET).lss
symbol_sizes: $(OBJDIR)/$(TARGET).sym
@$(ECHO) A symbol listing sorted by their size have been dumped to $(OBJDIR)/$(TARGET).sym
verify_size:
ifeq ($(strip $(HEX_MAXIMUM_SIZE)),)
@$(ECHO)
@$(ECHO) Maximum flash memory of $(BOARD_TAG) is not specified. Make sure the size of $(TARGET_HEX) is less than $(BOARD_TAG)\'s flash memory
@$(ECHO)
endif
@if [ ! -f $(TARGET_HEX).sizeok ]; then echo >&2 "\nThe size of the compiled binary file is greater than the $(BOARD_TAG)'s flash memory. \
See http://www.arduino.cc/en/Guide/Troubleshooting#size for tips on reducing it."; false; fi
generate_assembly: $(OBJDIR)/$(TARGET).s
@$(ECHO) Compiler-generated assembly for the main input source has been dumped to $(OBJDIR)/$(TARGET).s
generated_assembly: generate_assembly
@$(ECHO) "generated_assembly" target is deprecated. Use "generate_assembly" target instead
help:
@$(ECHO) "\nAvailable targets:\n\
make - no upload\n\
make upload - upload\n\
make clean - remove all our dependencies\n\
make depends - update dependencies\n\
make reset - reset the Arduino by tickling DTR on the serial port\n\
make raw_upload - upload without first resetting\n\
make show_boards - list all the boards defined in boards.txt\n\
make monitor - connect to the Arduino's serial port\n\
make size - show the size of the compiled output (relative to\n\
resources, if you have a patched avr-size)\n\
make disasm - generate a .lss file in build-cli that contains\n\
disassembly of the compiled file interspersed\n\
with your original source code.\n\
make verify_size - Verify that the size of the final file is less than\n\
the capacity of the micro controller.\n\
make eeprom - upload the eep file\n\
make raw_eeprom - upload the eep file without first resetting\n\
make help - show this help\n\
"
@$(ECHO) "Please refer to $(ARDMK_DIR)/arduino-mk/Arduino.mk for more details."
.PHONY: all upload raw_upload raw_eeprom error_on_caterina reset reset_stty ispload \
clean depends size show_boards monitor disasm symbol_sizes generated_assembly \
generate_assembly verify_size help
# added - in the beginning, so that we don't get an error if the file is not present
-include $(DEPS)
Reference in a new issue View git blame Copy permalink