a930c9983f
Implements two new make rules: 'net_set_fuses' executes a single ssh command, 'net_upload' pipes hex through ssh connection. The example also showcases the FORCE_MONITOR_PORT feature.
44 lines
1.3 KiB
Makefile
44 lines
1.3 KiB
Makefile
# Arduino Make file. Refer to https://github.com/sudar/Arduino-Makefile
|
|
|
|
# Tested and working with a linuxspi programmer on a remote Raspberry Pi
|
|
# Refer to https://github.com/kcuzner/avrdude for linuxspi.
|
|
# Should work with ISP as well if you replace $(AVRDUDE_ARD_OPTS) with
|
|
# $(AVRDUDE_ISP_OPTS) in the net_set_fuses rule.
|
|
|
|
# Alternate core from https://code.google.com/p/arduino-tiny
|
|
ALTERNATE_CORE = tiny
|
|
BOARD_TAG = attiny85at8
|
|
|
|
# Avrdude config path on the remote Raspberry Pi
|
|
AVRDUDE_CONF=/usr/local/etc/avrdude.conf
|
|
|
|
# Skip the monitor port existance check since it's not on our machine.
|
|
FORCE_MONITOR_PORT=(defined)
|
|
MONITOR_PORT=/dev/spidev0.0
|
|
|
|
include ../../Arduino.mk
|
|
|
|
|
|
# Additional rules to use a remote Raspberry Pi programmer
|
|
|
|
HOST = root@alarmpi
|
|
SSH_AVRDUDE = ssh $(HOST) /usr/local/bin/avrdude
|
|
|
|
CAT_HEX = cat $(TARGET_HEX)
|
|
AVRDUDE_UPLOAD_PIPE = -U flash:w:-:i
|
|
|
|
.PHONY: net_upload net_set_fuses
|
|
|
|
net_upload: $(TARGET_HEX) verify_size
|
|
$(CAT_HEX) | $(SSH_AVRDUDE) $(AVRDUDE_COM_OPTS) $(AVRDUDE_ARD_OPTS) \
|
|
$(AVRDUDE_UPLOAD_PIPE)
|
|
|
|
net_set_fuses:
|
|
ifneq ($(strip $(AVRDUDE_ISP_FUSES_PRE)),)
|
|
$(SSH_AVRDUDE) $(AVRDUDE_COM_OPTS) $(AVRDUDE_ARD_OPTS) -e \
|
|
$(AVRDUDE_ISP_FUSES_PRE)
|
|
endif
|
|
ifneq ($(strip $(AVRDUDE_ISP_FUSES_POST)),)
|
|
$(SSH_AVRDUDE) $(AVRDUDE_COM_OPTS) $(AVRDUDE_ARD_OPTS) \
|
|
$(AVRDUDE_ISP_FUSES_POST)
|
|
endif
|