[DEFAULT] # No need to touch this. If you want to bind it to a specific IP-address (if there are more than one interface to the # network you can set your ip here - but default it listens on every interface Host=0.0.0.0 # If changeing the port please change it also in the index.html-file at the parts where you find: # new WebSocket("ws://" + window.location.hostname ... Port=5678 # This defines the maximum amount of loglines to be sent on initial opening of the dashboard MaxLines=500 # Keep this parameter synchrone to Filerotate in MMDVM.ini/DMRHost.ini - if 0 then False, if 1 then True Filerotate=True [MMDVMHost] # Don't throw away the trailing slash! It is important but check logfile-location and Prefix twice :-) Logdir=/mnt/ramdisk/ # Change this to DMRHost, if you are using DMRHost and configured this as log-prefix in the host-ini. Prefix=MMDVM # if you want to have the operator-names as popup with the callsigns, set this parts = 1 and the LookupFile to # the right position. On MMDVMHost comment out the DMRIDs.dat-line to have the DMRIds and not the callsigns in the # logfile to have the callsigns with names transported to the dashboard. DMR_ID_Lookup=1 DMR_ID_LookupFile=/etc/MMDVM/DMRIds.dat # Location of your MMDVM.ini/DMRHost.ini or similar MMDVM_ini=/etc/MMDVM/MMDVM.ini # Localtion of your MMDVMHost/DMRHost-binary MMDVM_bin=/usr/local/bin/MMDVMHost [DAPNETGateway] # Don't throw away the trailing slash! It is important but check logfile-location and Prefix twice :-) Logdir=/mnt/ramdisk/ Prefix=DAPNETGateway