You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

214 lines
10 KiB

/*
* OV5640 register definitions.
*/
#ifndef __OV5640_REG_REGS_H__
#define __OV5640_REG_REGS_H__
/* system control registers */
#define SYSTEM_CTROL0 0x3008 // Bit[7]: Software reset
// Bit[6]: Software power down
// Bit[5]: Reserved
// Bit[4]: SRB clock SYNC enable
// Bit[3]: Isolation suspend select
// Bit[2:0]: Not used
#define DRIVE_CAPABILITY 0x302c // Bit[7:6]:
// 00: 1x
// 01: 2x
// 10: 3x
// 11: 4x
#define SC_PLLS_CTRL0 0x303a // Bit[7]: PLLS bypass
#define SC_PLLS_CTRL1 0x303b // Bit[4:0]: PLLS multiplier
#define SC_PLLS_CTRL2 0x303c // Bit[6:4]: PLLS charge pump control
// Bit[3:0]: PLLS system divider
#define SC_PLLS_CTRL3 0x303d // Bit[5:4]: PLLS pre-divider
// 00: 1
// 01: 1.5
// 10: 2
// 11: 3
// Bit[2]: PLLS root-divider - 1
// Bit[1:0]: PLLS seld5
// 00: 1
// 01: 1
// 10: 2
// 11: 2.5
/* AEC/AGC control functions */
#define AEC_PK_MANUAL 0x3503 // AEC Manual Mode Control
// Bit[7:6]: Reserved
// Bit[5]: Gain delay option
// Valid when 0x3503[4]=1b0
// 0: Delay one frame latch
// 1: One frame latch
// Bit[4:2]: Reserved
// Bit[1]: AGC manual
// 0: Auto enable
// 1: Manual enable
// Bit[0]: AEC manual
// 0: Auto enable
// 1: Manual enable
//gain = {0x350A[1:0], 0x350B[7:0]} / 16
#define X_ADDR_ST_H 0x3800 //Bit[3:0]: X address start[11:8]
#define X_ADDR_ST_L 0x3801 //Bit[7:0]: X address start[7:0]
#define Y_ADDR_ST_H 0x3802 //Bit[2:0]: Y address start[10:8]
#define Y_ADDR_ST_L 0x3803 //Bit[7:0]: Y address start[7:0]
#define X_ADDR_END_H 0x3804 //Bit[3:0]: X address end[11:8]
#define X_ADDR_END_L 0x3805 //Bit[7:0]:
#define Y_ADDR_END_H 0x3806 //Bit[2:0]: Y address end[10:8]
#define Y_ADDR_END_L 0x3807 //Bit[7:0]:
// Size after scaling
#define X_OUTPUT_SIZE_H 0x3808 //Bit[3:0]: DVP output horizontal width[11:8]
#define X_OUTPUT_SIZE_L 0x3809 //Bit[7:0]:
#define Y_OUTPUT_SIZE_H 0x380a //Bit[2:0]: DVP output vertical height[10:8]
#define Y_OUTPUT_SIZE_L 0x380b //Bit[7:0]:
#define X_TOTAL_SIZE_H 0x380c //Bit[3:0]: Total horizontal size[11:8]
#define X_TOTAL_SIZE_L 0x380d //Bit[7:0]:
#define Y_TOTAL_SIZE_H 0x380e //Bit[7:0]: Total vertical size[15:8]
#define Y_TOTAL_SIZE_L 0x380f //Bit[7:0]:
#define X_OFFSET_H 0x3810 //Bit[3:0]: ISP horizontal offset[11:8]
#define X_OFFSET_L 0x3811 //Bit[7:0]:
#define Y_OFFSET_H 0x3812 //Bit[2:0]: ISP vertical offset[10:8]
#define Y_OFFSET_L 0x3813 //Bit[7:0]:
#define X_INCREMENT 0x3814 //Bit[7:4]: Horizontal odd subsample increment
//Bit[3:0]: Horizontal even subsample increment
#define Y_INCREMENT 0x3815 //Bit[7:4]: Vertical odd subsample increment
//Bit[3:0]: Vertical even subsample increment
// Size before scaling
//#define X_INPUT_SIZE (X_ADDR_END - X_ADDR_ST + 1 - (2 * X_OFFSET))
//#define Y_INPUT_SIZE (Y_ADDR_END - Y_ADDR_ST + 1 - (2 * Y_OFFSET))
/* mirror and flip registers */
#define TIMING_TC_REG20 0x3820 // Timing Control Register
// Bit[2:1]: Vertical flip enable
// 00: Normal
// 11: Vertical flip
// Bit[0]: Vertical binning enable
#define TIMING_TC_REG21 0x3821 // Timing Control Register
// Bit[5]: Compression Enable
// Bit[2:1]: Horizontal mirror enable
// 00: Normal
// 11: Horizontal mirror
// Bit[0]: Horizontal binning enable
#define PCLK_RATIO 0x3824 // Bit[4:0]: PCLK ratio manual
/* frame control registers */
#define FRAME_CTRL01 0x4201 // Control Passed Frame Number When both ON and OFF number set to 0x00,frame control is in bypass mode
// Bit[7:4]: Not used
// Bit[3:0]: Frame ON number
#define FRAME_CTRL02 0x4202 // Control Masked Frame Number When both ON and OFF number set to 0x00,frame control is in bypass mode
// Bit[7:4]: Not used
// BIT[3:0]: Frame OFF number
/* format control registers */
#define FORMAT_CTRL00 0x4300
#define CLOCK_POL_CONTROL 0x4740// Bit[5]: PCLK polarity 0: active low
// 1: active high
// Bit[3]: Gate PCLK under VSYNC
// Bit[2]: Gate PCLK under HREF
// Bit[1]: HREF polarity
// 0: active low
// 1: active high
// Bit[0] VSYNC polarity
// 0: active low
// 1: active high
#define ISP_CONTROL_01 0x5001 // Bit[5]: Scale enable
// 0: Disable
// 1: Enable
/* output format control registers */
#define FORMAT_CTRL 0x501F // Format select
// Bit[2:0]:
// 000: YUV422
// 001: RGB
// 010: Dither
// 011: RAW after DPC
// 101: RAW after CIP
/* ISP top control registers */
#define PRE_ISP_TEST_SETTING_1 0x503D // Bit[7]: Test enable
// 0: Test disable
// 1: Color bar enable
// Bit[6]: Rolling
// Bit[5]: Transparent
// Bit[4]: Square black and white
// Bit[3:2]: Color bar style
// 00: Standard 8 color bar
// 01: Gradual change at vertical mode 1
// 10: Gradual change at horizontal
// 11: Gradual change at vertical mode 2
// Bit[1:0]: Test select
// 00: Color bar
// 01: Random data
// 10: Square data
// 11: Black image
//exposure = {0x3500[3:0], 0x3501[7:0], 0x3502[7:0]} / 16 × tROW
#define SCALE_CTRL_1 0x5601 // Bit[6:4]: HDIV RW
// DCW scale times
// 000: DCW 1 time
// 001: DCW 2 times
// 010: DCW 4 times
// 100: DCW 8 times
// 101: DCW 16 times
// Others: DCW 16 times
// Bit[2:0]: VDIV RW
// DCW scale times
// 000: DCW 1 time
// 001: DCW 2 times
// 010: DCW 4 times
// 100: DCW 8 times
// 101: DCW 16 times
// Others: DCW 16 times
#define SCALE_CTRL_2 0x5602 // X_SCALE High Bits
#define SCALE_CTRL_3 0x5603 // X_SCALE Low Bits
#define SCALE_CTRL_4 0x5604 // Y_SCALE High Bits
#define SCALE_CTRL_5 0x5605 // Y_SCALE Low Bits
#define SCALE_CTRL_6 0x5606 // Bit[3:0]: V Offset
#define VFIFO_CTRL0C 0x460C // Bit[1]: PCLK manual enable
// 0: Auto
// 1: Manual by PCLK_RATIO
#define VFIFO_X_SIZE_H 0x4602
#define VFIFO_X_SIZE_L 0x4603
#define VFIFO_Y_SIZE_H 0x4604
#define VFIFO_Y_SIZE_L 0x4605
#define COMPRESSION_CTRL00 0x4400 //
#define COMPRESSION_CTRL01 0x4401 //
#define COMPRESSION_CTRL02 0x4402 //
#define COMPRESSION_CTRL03 0x4403 //
#define COMPRESSION_CTRL04 0x4404 //
#define COMPRESSION_CTRL05 0x4405 //
#define COMPRESSION_CTRL06 0x4406 //
#define COMPRESSION_CTRL07 0x4407 // Bit[5:0]: QS
#define COMPRESSION_ISI_CTRL 0x4408 //
#define COMPRESSION_CTRL09 0x4409 //
#define COMPRESSION_CTRL0a 0x440a //
#define COMPRESSION_CTRL0b 0x440b //
#define COMPRESSION_CTRL0c 0x440c //
#define COMPRESSION_CTRL0d 0x440d //
#define COMPRESSION_CTRL0E 0x440e //
/**
* @brief register value
*/
#define TEST_COLOR_BAR 0xC0 /* Enable Color Bar roling Test */
#define AEC_PK_MANUAL_AGC_MANUALEN 0x02 /* Enable AGC Manual enable */
#define AEC_PK_MANUAL_AEC_MANUALEN 0x01 /* Enable AEC Manual enable */
#define TIMING_TC_REG20_VFLIP 0x06 /* Vertical flip enable */
#define TIMING_TC_REG21_HMIRROR 0x06 /* Horizontal mirror enable */
#endif // __OV3660_REG_REGS_H__