You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1513 lines
47 KiB
1513 lines
47 KiB
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
|
|
//
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
|
// you may not use this file except in compliance with the License.
|
|
// You may obtain a copy of the License at
|
|
//
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
//
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
// See the License for the specific language governing permissions and
|
|
// limitations under the License.
|
|
#include <stdio.h>
|
|
#include <stdlib.h>
|
|
#include <string.h>
|
|
#include "time.h"
|
|
#include "sys/time.h"
|
|
#include "freertos/FreeRTOS.h"
|
|
#include "freertos/task.h"
|
|
#include "freertos/semphr.h"
|
|
#include "soc/soc.h"
|
|
#include "soc/gpio_sig_map.h"
|
|
#include "soc/i2s_reg.h"
|
|
#include "soc/i2s_struct.h"
|
|
#include "soc/io_mux_reg.h"
|
|
#include "driver/gpio.h"
|
|
#include "driver/rtc_io.h"
|
|
#include "driver/periph_ctrl.h"
|
|
#include "esp_intr_alloc.h"
|
|
#include "esp_system.h"
|
|
#include "nvs_flash.h"
|
|
#include "nvs.h"
|
|
#include "sensor.h"
|
|
#include "sccb.h"
|
|
#include "esp_camera.h"
|
|
#include "camera_common.h"
|
|
#include "xclk.h"
|
|
#if CONFIG_OV2640_SUPPORT
|
|
#include "ov2640.h"
|
|
#endif
|
|
#if CONFIG_OV7725_SUPPORT
|
|
#include "ov7725.h"
|
|
#endif
|
|
#if CONFIG_OV3660_SUPPORT
|
|
#include "ov3660.h"
|
|
#endif
|
|
#if CONFIG_OV5640_SUPPORT
|
|
#include "ov5640.h"
|
|
#endif
|
|
|
|
typedef enum {
|
|
CAMERA_NONE = 0,
|
|
CAMERA_UNKNOWN = 1,
|
|
CAMERA_OV7725 = 7725,
|
|
CAMERA_OV2640 = 2640,
|
|
CAMERA_OV3660 = 3660,
|
|
CAMERA_OV5640 = 5640,
|
|
} camera_model_t;
|
|
|
|
#define REG_PID 0x0A
|
|
#define REG_VER 0x0B
|
|
#define REG_MIDH 0x1C
|
|
#define REG_MIDL 0x1D
|
|
|
|
#define REG16_CHIDH 0x300A
|
|
#define REG16_CHIDL 0x300B
|
|
|
|
#if defined(ARDUINO_ARCH_ESP32) && defined(CONFIG_ARDUHAL_ESP_LOG)
|
|
#include "esp32-hal-log.h"
|
|
#define TAG ""
|
|
#else
|
|
#include "esp_log.h"
|
|
static const char* TAG = "camera";
|
|
#endif
|
|
static const char* CAMERA_SENSOR_NVS_KEY = "sensor";
|
|
static const char* CAMERA_PIXFORMAT_NVS_KEY = "pixformat";
|
|
|
|
typedef void (*dma_filter_t)(const dma_elem_t* src, lldesc_t* dma_desc, uint8_t* dst);
|
|
|
|
typedef struct camera_fb_s {
|
|
uint8_t * buf;
|
|
size_t len;
|
|
size_t width;
|
|
size_t height;
|
|
pixformat_t format;
|
|
struct timeval timestamp;
|
|
size_t size;
|
|
uint8_t ref;
|
|
uint8_t bad;
|
|
struct camera_fb_s * next;
|
|
} camera_fb_int_t;
|
|
|
|
typedef struct fb_s {
|
|
uint8_t * buf;
|
|
size_t len;
|
|
struct fb_s * next;
|
|
} fb_item_t;
|
|
|
|
typedef struct {
|
|
camera_config_t config;
|
|
sensor_t sensor;
|
|
|
|
camera_fb_int_t *fb;
|
|
size_t fb_size;
|
|
size_t data_size;
|
|
|
|
size_t width;
|
|
size_t height;
|
|
size_t in_bytes_per_pixel;
|
|
size_t fb_bytes_per_pixel;
|
|
|
|
size_t dma_received_count;
|
|
size_t dma_filtered_count;
|
|
size_t dma_per_line;
|
|
size_t dma_buf_width;
|
|
size_t dma_sample_count;
|
|
|
|
lldesc_t *dma_desc;
|
|
dma_elem_t **dma_buf;
|
|
size_t dma_desc_count;
|
|
size_t dma_desc_cur;
|
|
|
|
i2s_sampling_mode_t sampling_mode;
|
|
dma_filter_t dma_filter;
|
|
intr_handle_t i2s_intr_handle;
|
|
QueueHandle_t data_ready;
|
|
QueueHandle_t fb_in;
|
|
QueueHandle_t fb_out;
|
|
|
|
SemaphoreHandle_t frame_ready;
|
|
TaskHandle_t dma_filter_task;
|
|
} camera_state_t;
|
|
|
|
camera_state_t* s_state = NULL;
|
|
|
|
static void i2s_init();
|
|
static int i2s_run();
|
|
static void IRAM_ATTR vsync_isr(void* arg);
|
|
static void IRAM_ATTR i2s_isr(void* arg);
|
|
static esp_err_t dma_desc_init();
|
|
static void dma_desc_deinit();
|
|
static void dma_filter_task(void *pvParameters);
|
|
static void dma_filter_grayscale(const dma_elem_t* src, lldesc_t* dma_desc, uint8_t* dst);
|
|
static void dma_filter_grayscale_highspeed(const dma_elem_t* src, lldesc_t* dma_desc, uint8_t* dst);
|
|
static void dma_filter_yuyv(const dma_elem_t* src, lldesc_t* dma_desc, uint8_t* dst);
|
|
static void dma_filter_yuyv_highspeed(const dma_elem_t* src, lldesc_t* dma_desc, uint8_t* dst);
|
|
static void dma_filter_jpeg(const dma_elem_t* src, lldesc_t* dma_desc, uint8_t* dst);
|
|
static void i2s_stop(bool* need_yield);
|
|
|
|
static bool is_hs_mode()
|
|
{
|
|
return s_state->config.xclk_freq_hz > 10000000;
|
|
}
|
|
|
|
static size_t i2s_bytes_per_sample(i2s_sampling_mode_t mode)
|
|
{
|
|
switch(mode) {
|
|
case SM_0A00_0B00:
|
|
return 4;
|
|
case SM_0A0B_0B0C:
|
|
return 4;
|
|
case SM_0A0B_0C0D:
|
|
return 2;
|
|
default:
|
|
assert(0 && "invalid sampling mode");
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static int IRAM_ATTR _gpio_get_level(gpio_num_t gpio_num)
|
|
{
|
|
if (gpio_num < 32) {
|
|
return (GPIO.in >> gpio_num) & 0x1;
|
|
} else {
|
|
return (GPIO.in1.data >> (gpio_num - 32)) & 0x1;
|
|
}
|
|
}
|
|
|
|
static void IRAM_ATTR vsync_intr_disable()
|
|
{
|
|
gpio_set_intr_type(s_state->config.pin_vsync, GPIO_INTR_DISABLE);
|
|
}
|
|
|
|
static void vsync_intr_enable()
|
|
{
|
|
gpio_set_intr_type(s_state->config.pin_vsync, GPIO_INTR_NEGEDGE);
|
|
}
|
|
|
|
static int skip_frame()
|
|
{
|
|
if (s_state == NULL) {
|
|
return -1;
|
|
}
|
|
int64_t st_t = esp_timer_get_time();
|
|
while (_gpio_get_level(s_state->config.pin_vsync) == 0) {
|
|
if((esp_timer_get_time() - st_t) > 1000000LL){
|
|
goto timeout;
|
|
}
|
|
}
|
|
while (_gpio_get_level(s_state->config.pin_vsync) != 0) {
|
|
if((esp_timer_get_time() - st_t) > 1000000LL){
|
|
goto timeout;
|
|
}
|
|
}
|
|
while (_gpio_get_level(s_state->config.pin_vsync) == 0) {
|
|
if((esp_timer_get_time() - st_t) > 1000000LL){
|
|
goto timeout;
|
|
}
|
|
}
|
|
return 0;
|
|
|
|
timeout:
|
|
ESP_LOGE(TAG, "Timeout waiting for VSYNC");
|
|
return -1;
|
|
}
|
|
|
|
static void camera_fb_deinit()
|
|
{
|
|
camera_fb_int_t * _fb1 = s_state->fb, * _fb2 = NULL;
|
|
while(s_state->fb) {
|
|
_fb2 = s_state->fb;
|
|
s_state->fb = _fb2->next;
|
|
if(_fb2->next == _fb1) {
|
|
s_state->fb = NULL;
|
|
}
|
|
free(_fb2->buf);
|
|
free(_fb2);
|
|
}
|
|
}
|
|
|
|
static esp_err_t camera_fb_init(size_t count)
|
|
{
|
|
if(!count) {
|
|
return ESP_ERR_INVALID_ARG;
|
|
}
|
|
|
|
camera_fb_deinit();
|
|
|
|
ESP_LOGI(TAG, "Allocating %u frame buffers (%d KB total)", count, (s_state->fb_size * count) / 1024);
|
|
|
|
camera_fb_int_t * _fb = NULL, * _fb1 = NULL, * _fb2 = NULL;
|
|
for(size_t i = 0; i < count; i++) {
|
|
_fb2 = (camera_fb_int_t *)malloc(sizeof(camera_fb_int_t));
|
|
if(!_fb2) {
|
|
goto fail;
|
|
}
|
|
memset(_fb2, 0, sizeof(camera_fb_int_t));
|
|
_fb2->size = s_state->fb_size;
|
|
_fb2->buf = (uint8_t*) calloc(_fb2->size, 1);
|
|
if(!_fb2->buf) {
|
|
ESP_LOGI(TAG, "Allocating %d KB frame buffer in PSRAM", s_state->fb_size/1024);
|
|
_fb2->buf = (uint8_t*) heap_caps_calloc(_fb2->size, 1, MALLOC_CAP_SPIRAM | MALLOC_CAP_8BIT);
|
|
} else {
|
|
ESP_LOGI(TAG, "Allocating %d KB frame buffer in OnBoard RAM", s_state->fb_size/1024);
|
|
}
|
|
if(!_fb2->buf) {
|
|
free(_fb2);
|
|
ESP_LOGE(TAG, "Allocating %d KB frame buffer Failed", s_state->fb_size/1024);
|
|
goto fail;
|
|
}
|
|
memset(_fb2->buf, 0, _fb2->size);
|
|
_fb2->next = _fb;
|
|
_fb = _fb2;
|
|
if(!i) {
|
|
_fb1 = _fb2;
|
|
}
|
|
}
|
|
if(_fb1) {
|
|
_fb1->next = _fb;
|
|
}
|
|
|
|
s_state->fb = _fb;//load first buffer
|
|
|
|
return ESP_OK;
|
|
|
|
fail:
|
|
while(_fb) {
|
|
_fb2 = _fb;
|
|
_fb = _fb->next;
|
|
free(_fb2->buf);
|
|
free(_fb2);
|
|
}
|
|
return ESP_ERR_NO_MEM;
|
|
}
|
|
|
|
static esp_err_t dma_desc_init()
|
|
{
|
|
assert(s_state->width % 4 == 0);
|
|
size_t line_size = s_state->width * s_state->in_bytes_per_pixel *
|
|
i2s_bytes_per_sample(s_state->sampling_mode);
|
|
ESP_LOGD(TAG, "Line width (for DMA): %d bytes", line_size);
|
|
size_t dma_per_line = 1;
|
|
size_t buf_size = line_size;
|
|
while (buf_size >= 4096) {
|
|
buf_size /= 2;
|
|
dma_per_line *= 2;
|
|
}
|
|
size_t dma_desc_count = dma_per_line * 4;
|
|
s_state->dma_buf_width = line_size;
|
|
s_state->dma_per_line = dma_per_line;
|
|
s_state->dma_desc_count = dma_desc_count;
|
|
ESP_LOGD(TAG, "DMA buffer size: %d, DMA buffers per line: %d", buf_size, dma_per_line);
|
|
ESP_LOGD(TAG, "DMA buffer count: %d", dma_desc_count);
|
|
ESP_LOGD(TAG, "DMA buffer total: %d bytes", buf_size * dma_desc_count);
|
|
|
|
s_state->dma_buf = (dma_elem_t**) malloc(sizeof(dma_elem_t*) * dma_desc_count);
|
|
if (s_state->dma_buf == NULL) {
|
|
return ESP_ERR_NO_MEM;
|
|
}
|
|
s_state->dma_desc = (lldesc_t*) malloc(sizeof(lldesc_t) * dma_desc_count);
|
|
if (s_state->dma_desc == NULL) {
|
|
return ESP_ERR_NO_MEM;
|
|
}
|
|
size_t dma_sample_count = 0;
|
|
for (int i = 0; i < dma_desc_count; ++i) {
|
|
ESP_LOGD(TAG, "Allocating DMA buffer #%d, size=%d", i, buf_size);
|
|
dma_elem_t* buf = (dma_elem_t*) malloc(buf_size);
|
|
if (buf == NULL) {
|
|
return ESP_ERR_NO_MEM;
|
|
}
|
|
s_state->dma_buf[i] = buf;
|
|
ESP_LOGV(TAG, "dma_buf[%d]=%p", i, buf);
|
|
|
|
lldesc_t* pd = &s_state->dma_desc[i];
|
|
pd->length = buf_size;
|
|
if (s_state->sampling_mode == SM_0A0B_0B0C &&
|
|
(i + 1) % dma_per_line == 0) {
|
|
pd->length -= 4;
|
|
}
|
|
dma_sample_count += pd->length / 4;
|
|
pd->size = pd->length;
|
|
pd->owner = 1;
|
|
pd->sosf = 1;
|
|
pd->buf = (uint8_t*) buf;
|
|
pd->offset = 0;
|
|
pd->empty = 0;
|
|
pd->eof = 1;
|
|
pd->qe.stqe_next = &s_state->dma_desc[(i + 1) % dma_desc_count];
|
|
}
|
|
s_state->dma_sample_count = dma_sample_count;
|
|
return ESP_OK;
|
|
}
|
|
|
|
static void dma_desc_deinit()
|
|
{
|
|
if (s_state->dma_buf) {
|
|
for (int i = 0; i < s_state->dma_desc_count; ++i) {
|
|
free(s_state->dma_buf[i]);
|
|
}
|
|
}
|
|
free(s_state->dma_buf);
|
|
free(s_state->dma_desc);
|
|
}
|
|
|
|
static inline void IRAM_ATTR i2s_conf_reset()
|
|
{
|
|
const uint32_t lc_conf_reset_flags = I2S_IN_RST_M | I2S_AHBM_RST_M
|
|
| I2S_AHBM_FIFO_RST_M;
|
|
I2S0.lc_conf.val |= lc_conf_reset_flags;
|
|
I2S0.lc_conf.val &= ~lc_conf_reset_flags;
|
|
|
|
const uint32_t conf_reset_flags = I2S_RX_RESET_M | I2S_RX_FIFO_RESET_M
|
|
| I2S_TX_RESET_M | I2S_TX_FIFO_RESET_M;
|
|
I2S0.conf.val |= conf_reset_flags;
|
|
I2S0.conf.val &= ~conf_reset_flags;
|
|
while (I2S0.state.rx_fifo_reset_back) {
|
|
;
|
|
}
|
|
}
|
|
|
|
static void i2s_init()
|
|
{
|
|
camera_config_t* config = &s_state->config;
|
|
|
|
// Configure input GPIOs
|
|
gpio_num_t pins[] = {
|
|
config->pin_d7,
|
|
config->pin_d6,
|
|
config->pin_d5,
|
|
config->pin_d4,
|
|
config->pin_d3,
|
|
config->pin_d2,
|
|
config->pin_d1,
|
|
config->pin_d0,
|
|
config->pin_vsync,
|
|
config->pin_href,
|
|
config->pin_pclk
|
|
};
|
|
gpio_config_t conf = {
|
|
.mode = GPIO_MODE_INPUT,
|
|
.pull_up_en = GPIO_PULLUP_ENABLE,
|
|
.pull_down_en = GPIO_PULLDOWN_DISABLE,
|
|
.intr_type = GPIO_INTR_DISABLE
|
|
};
|
|
for (int i = 0; i < sizeof(pins) / sizeof(gpio_num_t); ++i) {
|
|
if (rtc_gpio_is_valid_gpio(pins[i])) {
|
|
rtc_gpio_deinit(pins[i]);
|
|
}
|
|
conf.pin_bit_mask = 1LL << pins[i];
|
|
gpio_config(&conf);
|
|
}
|
|
|
|
// Route input GPIOs to I2S peripheral using GPIO matrix
|
|
gpio_matrix_in(config->pin_d0, I2S0I_DATA_IN0_IDX, false);
|
|
gpio_matrix_in(config->pin_d1, I2S0I_DATA_IN1_IDX, false);
|
|
gpio_matrix_in(config->pin_d2, I2S0I_DATA_IN2_IDX, false);
|
|
gpio_matrix_in(config->pin_d3, I2S0I_DATA_IN3_IDX, false);
|
|
gpio_matrix_in(config->pin_d4, I2S0I_DATA_IN4_IDX, false);
|
|
gpio_matrix_in(config->pin_d5, I2S0I_DATA_IN5_IDX, false);
|
|
gpio_matrix_in(config->pin_d6, I2S0I_DATA_IN6_IDX, false);
|
|
gpio_matrix_in(config->pin_d7, I2S0I_DATA_IN7_IDX, false);
|
|
gpio_matrix_in(config->pin_vsync, I2S0I_V_SYNC_IDX, false);
|
|
gpio_matrix_in(0x38, I2S0I_H_SYNC_IDX, false);
|
|
gpio_matrix_in(config->pin_href, I2S0I_H_ENABLE_IDX, false);
|
|
gpio_matrix_in(config->pin_pclk, I2S0I_WS_IN_IDX, false);
|
|
|
|
// Enable and configure I2S peripheral
|
|
periph_module_enable(PERIPH_I2S0_MODULE);
|
|
// Toggle some reset bits in LC_CONF register
|
|
// Toggle some reset bits in CONF register
|
|
i2s_conf_reset();
|
|
// Enable slave mode (sampling clock is external)
|
|
I2S0.conf.rx_slave_mod = 1;
|
|
// Enable parallel mode
|
|
I2S0.conf2.lcd_en = 1;
|
|
// Use HSYNC/VSYNC/HREF to control sampling
|
|
I2S0.conf2.camera_en = 1;
|
|
// Configure clock divider
|
|
I2S0.clkm_conf.clkm_div_a = 1;
|
|
I2S0.clkm_conf.clkm_div_b = 0;
|
|
I2S0.clkm_conf.clkm_div_num = 2;
|
|
// FIFO will sink data to DMA
|
|
I2S0.fifo_conf.dscr_en = 1;
|
|
// FIFO configuration
|
|
I2S0.fifo_conf.rx_fifo_mod = s_state->sampling_mode;
|
|
I2S0.fifo_conf.rx_fifo_mod_force_en = 1;
|
|
I2S0.conf_chan.rx_chan_mod = 1;
|
|
// Clear flags which are used in I2S serial mode
|
|
I2S0.sample_rate_conf.rx_bits_mod = 0;
|
|
I2S0.conf.rx_right_first = 0;
|
|
I2S0.conf.rx_msb_right = 0;
|
|
I2S0.conf.rx_msb_shift = 0;
|
|
I2S0.conf.rx_mono = 0;
|
|
I2S0.conf.rx_short_sync = 0;
|
|
I2S0.timing.val = 0;
|
|
I2S0.timing.rx_dsync_sw = 1;
|
|
|
|
// Allocate I2S interrupt, keep it disabled
|
|
ESP_ERROR_CHECK(esp_intr_alloc(ETS_I2S0_INTR_SOURCE,
|
|
ESP_INTR_FLAG_INTRDISABLED | ESP_INTR_FLAG_LOWMED | ESP_INTR_FLAG_IRAM,
|
|
&i2s_isr, NULL, &s_state->i2s_intr_handle));
|
|
}
|
|
|
|
static void IRAM_ATTR i2s_start_bus()
|
|
{
|
|
s_state->dma_desc_cur = 0;
|
|
s_state->dma_received_count = 0;
|
|
//s_state->dma_filtered_count = 0;
|
|
esp_intr_disable(s_state->i2s_intr_handle);
|
|
i2s_conf_reset();
|
|
|
|
I2S0.rx_eof_num = s_state->dma_sample_count;
|
|
I2S0.in_link.addr = (uint32_t) &s_state->dma_desc[0];
|
|
I2S0.in_link.start = 1;
|
|
I2S0.int_clr.val = I2S0.int_raw.val;
|
|
I2S0.int_ena.val = 0;
|
|
I2S0.int_ena.in_done = 1;
|
|
|
|
esp_intr_enable(s_state->i2s_intr_handle);
|
|
I2S0.conf.rx_start = 1;
|
|
if (s_state->config.pixel_format == PIXFORMAT_JPEG) {
|
|
vsync_intr_enable();
|
|
}
|
|
}
|
|
|
|
static int i2s_run()
|
|
{
|
|
for (int i = 0; i < s_state->dma_desc_count; ++i) {
|
|
lldesc_t* d = &s_state->dma_desc[i];
|
|
ESP_LOGV(TAG, "DMA desc %2d: %u %u %u %u %u %u %p %p",
|
|
i, d->length, d->size, d->offset, d->eof, d->sosf, d->owner, d->buf, d->qe.stqe_next);
|
|
memset(s_state->dma_buf[i], 0, d->length);
|
|
}
|
|
|
|
// wait for frame
|
|
camera_fb_int_t * fb = s_state->fb;
|
|
while(s_state->config.fb_count > 1) {
|
|
while(s_state->fb->ref && s_state->fb->next != fb) {
|
|
s_state->fb = s_state->fb->next;
|
|
}
|
|
if(s_state->fb->ref == 0) {
|
|
break;
|
|
}
|
|
vTaskDelay(2);
|
|
}
|
|
|
|
//todo: wait for vsync
|
|
ESP_LOGV(TAG, "Waiting for negative edge on VSYNC");
|
|
|
|
int64_t st_t = esp_timer_get_time();
|
|
while (_gpio_get_level(s_state->config.pin_vsync) != 0) {
|
|
if((esp_timer_get_time() - st_t) > 1000000LL){
|
|
ESP_LOGE(TAG, "Timeout waiting for VSYNC");
|
|
return -1;
|
|
}
|
|
}
|
|
ESP_LOGV(TAG, "Got VSYNC");
|
|
i2s_start_bus();
|
|
return 0;
|
|
}
|
|
|
|
static void IRAM_ATTR i2s_stop_bus()
|
|
{
|
|
esp_intr_disable(s_state->i2s_intr_handle);
|
|
vsync_intr_disable();
|
|
i2s_conf_reset();
|
|
I2S0.conf.rx_start = 0;
|
|
}
|
|
|
|
static void IRAM_ATTR i2s_stop(bool* need_yield)
|
|
{
|
|
if(s_state->config.fb_count == 1 && !s_state->fb->bad) {
|
|
i2s_stop_bus();
|
|
} else {
|
|
s_state->dma_received_count = 0;
|
|
}
|
|
|
|
size_t val = SIZE_MAX;
|
|
BaseType_t higher_priority_task_woken;
|
|
BaseType_t ret = xQueueSendFromISR(s_state->data_ready, &val, &higher_priority_task_woken);
|
|
if(need_yield && !*need_yield) {
|
|
*need_yield = (ret == pdTRUE && higher_priority_task_woken == pdTRUE);
|
|
}
|
|
}
|
|
|
|
static void IRAM_ATTR signal_dma_buf_received(bool* need_yield)
|
|
{
|
|
size_t dma_desc_filled = s_state->dma_desc_cur;
|
|
s_state->dma_desc_cur = (dma_desc_filled + 1) % s_state->dma_desc_count;
|
|
s_state->dma_received_count++;
|
|
if(!s_state->fb->ref && s_state->fb->bad){
|
|
*need_yield = false;
|
|
return;
|
|
}
|
|
BaseType_t higher_priority_task_woken;
|
|
BaseType_t ret = xQueueSendFromISR(s_state->data_ready, &dma_desc_filled, &higher_priority_task_woken);
|
|
if (ret != pdTRUE) {
|
|
if(!s_state->fb->ref) {
|
|
s_state->fb->bad = 1;
|
|
}
|
|
//ESP_EARLY_LOGW(TAG, "qsf:%d", s_state->dma_received_count);
|
|
//ets_printf("qsf:%d\n", s_state->dma_received_count);
|
|
//ets_printf("qovf\n");
|
|
}
|
|
*need_yield = (ret == pdTRUE && higher_priority_task_woken == pdTRUE);
|
|
}
|
|
|
|
static void IRAM_ATTR i2s_isr(void* arg)
|
|
{
|
|
I2S0.int_clr.val = I2S0.int_raw.val;
|
|
bool need_yield = false;
|
|
signal_dma_buf_received(&need_yield);
|
|
if (s_state->config.pixel_format != PIXFORMAT_JPEG
|
|
&& s_state->dma_received_count == s_state->height * s_state->dma_per_line) {
|
|
i2s_stop(&need_yield);
|
|
}
|
|
if (need_yield) {
|
|
portYIELD_FROM_ISR();
|
|
}
|
|
}
|
|
|
|
static void IRAM_ATTR vsync_isr(void* arg)
|
|
{
|
|
GPIO.status1_w1tc.val = GPIO.status1.val;
|
|
GPIO.status_w1tc = GPIO.status;
|
|
bool need_yield = false;
|
|
//if vsync is low and we have received some data, frame is done
|
|
if (_gpio_get_level(s_state->config.pin_vsync) == 0) {
|
|
if(s_state->dma_received_count > 0) {
|
|
signal_dma_buf_received(&need_yield);
|
|
//ets_printf("end_vsync\n");
|
|
if(s_state->dma_filtered_count > 1 || s_state->fb->bad || s_state->config.fb_count > 1) {
|
|
i2s_stop(&need_yield);
|
|
}
|
|
//ets_printf("vs\n");
|
|
}
|
|
if(s_state->config.fb_count > 1 || s_state->dma_filtered_count < 2) {
|
|
I2S0.conf.rx_start = 0;
|
|
I2S0.in_link.start = 0;
|
|
I2S0.int_clr.val = I2S0.int_raw.val;
|
|
i2s_conf_reset();
|
|
s_state->dma_desc_cur = (s_state->dma_desc_cur + 1) % s_state->dma_desc_count;
|
|
//I2S0.rx_eof_num = s_state->dma_sample_count;
|
|
I2S0.in_link.addr = (uint32_t) &s_state->dma_desc[s_state->dma_desc_cur];
|
|
I2S0.in_link.start = 1;
|
|
I2S0.conf.rx_start = 1;
|
|
s_state->dma_received_count = 0;
|
|
}
|
|
}
|
|
if (need_yield) {
|
|
portYIELD_FROM_ISR();
|
|
}
|
|
}
|
|
|
|
static void IRAM_ATTR camera_fb_done()
|
|
{
|
|
camera_fb_int_t * fb = NULL, * fb2 = NULL;
|
|
BaseType_t taskAwoken = 0;
|
|
|
|
if(s_state->config.fb_count == 1) {
|
|
xSemaphoreGive(s_state->frame_ready);
|
|
return;
|
|
}
|
|
|
|
fb = s_state->fb;
|
|
if(!fb->ref && fb->len) {
|
|
//add reference
|
|
fb->ref = 1;
|
|
|
|
//check if the queue is full
|
|
if(xQueueIsQueueFullFromISR(s_state->fb_out) == pdTRUE) {
|
|
//pop frame buffer from the queue
|
|
if(xQueueReceiveFromISR(s_state->fb_out, &fb2, &taskAwoken) == pdTRUE) {
|
|
//free the popped buffer
|
|
fb2->ref = 0;
|
|
fb2->len = 0;
|
|
//push the new frame to the end of the queue
|
|
xQueueSendFromISR(s_state->fb_out, &fb, &taskAwoken);
|
|
} else {
|
|
//queue is full and we could not pop a frame from it
|
|
}
|
|
} else {
|
|
//push the new frame to the end of the queue
|
|
xQueueSendFromISR(s_state->fb_out, &fb, &taskAwoken);
|
|
}
|
|
} else {
|
|
//frame was referenced or empty
|
|
}
|
|
|
|
//return buffers to be filled
|
|
while(xQueueReceiveFromISR(s_state->fb_in, &fb2, &taskAwoken) == pdTRUE) {
|
|
fb2->ref = 0;
|
|
fb2->len = 0;
|
|
}
|
|
|
|
//advance frame buffer only if the current one has data
|
|
if(s_state->fb->len) {
|
|
s_state->fb = s_state->fb->next;
|
|
}
|
|
//try to find the next free frame buffer
|
|
while(s_state->fb->ref && s_state->fb->next != fb) {
|
|
s_state->fb = s_state->fb->next;
|
|
}
|
|
//is the found frame buffer free?
|
|
if(!s_state->fb->ref) {
|
|
//buffer found. make sure it's empty
|
|
s_state->fb->len = 0;
|
|
*((uint32_t *)s_state->fb->buf) = 0;
|
|
} else {
|
|
//stay at the previous buffer
|
|
s_state->fb = fb;
|
|
}
|
|
}
|
|
|
|
static void IRAM_ATTR dma_finish_frame()
|
|
{
|
|
size_t buf_len = s_state->width * s_state->fb_bytes_per_pixel / s_state->dma_per_line;
|
|
|
|
if(!s_state->fb->ref) {
|
|
// is the frame bad?
|
|
if(s_state->fb->bad){
|
|
s_state->fb->bad = 0;
|
|
s_state->fb->len = 0;
|
|
*((uint32_t *)s_state->fb->buf) = 0;
|
|
if(s_state->config.fb_count == 1) {
|
|
i2s_start_bus();
|
|
}
|
|
//ets_printf("bad\n");
|
|
} else {
|
|
s_state->fb->len = s_state->dma_filtered_count * buf_len;
|
|
if(s_state->fb->len) {
|
|
//find the end marker for JPEG. Data after that can be discarded
|
|
if(s_state->fb->format == PIXFORMAT_JPEG){
|
|
uint8_t * dptr = &s_state->fb->buf[s_state->fb->len - 1];
|
|
while(dptr > s_state->fb->buf){
|
|
if(dptr[0] == 0xFF && dptr[1] == 0xD9 && dptr[2] == 0x00 && dptr[3] == 0x00){
|
|
dptr += 2;
|
|
s_state->fb->len = dptr - s_state->fb->buf;
|
|
if((s_state->fb->len & 0x1FF) == 0){
|
|
s_state->fb->len += 1;
|
|
}
|
|
if((s_state->fb->len % 100) == 0){
|
|
s_state->fb->len += 1;
|
|
}
|
|
break;
|
|
}
|
|
dptr--;
|
|
}
|
|
}
|
|
//send out the frame
|
|
camera_fb_done();
|
|
} else if(s_state->config.fb_count == 1){
|
|
//frame was empty?
|
|
i2s_start_bus();
|
|
} else {
|
|
//ets_printf("empty\n");
|
|
}
|
|
}
|
|
} else if(s_state->fb->len) {
|
|
camera_fb_done();
|
|
}
|
|
s_state->dma_filtered_count = 0;
|
|
}
|
|
|
|
static void IRAM_ATTR dma_filter_buffer(size_t buf_idx)
|
|
{
|
|
//no need to process the data if frame is in use or is bad
|
|
if(s_state->fb->ref || s_state->fb->bad) {
|
|
return;
|
|
}
|
|
|
|
//check if there is enough space in the frame buffer for the new data
|
|
size_t buf_len = s_state->width * s_state->fb_bytes_per_pixel / s_state->dma_per_line;
|
|
size_t fb_pos = s_state->dma_filtered_count * buf_len;
|
|
if(fb_pos > s_state->fb_size - buf_len) {
|
|
//size_t processed = s_state->dma_received_count * buf_len;
|
|
//ets_printf("[%s:%u] ovf pos: %u, processed: %u\n", __FUNCTION__, __LINE__, fb_pos, processed);
|
|
return;
|
|
}
|
|
|
|
//convert I2S DMA buffer to pixel data
|
|
(*s_state->dma_filter)(s_state->dma_buf[buf_idx], &s_state->dma_desc[buf_idx], s_state->fb->buf + fb_pos);
|
|
|
|
//first frame buffer
|
|
if(!s_state->dma_filtered_count) {
|
|
//check for correct JPEG header
|
|
if(s_state->sensor.pixformat == PIXFORMAT_JPEG) {
|
|
uint32_t sig = *((uint32_t *)s_state->fb->buf) & 0xFFFFFF;
|
|
if(sig != 0xffd8ff) {
|
|
ets_printf("bh 0x%08x\n", sig);
|
|
s_state->fb->bad = 1;
|
|
return;
|
|
}
|
|
}
|
|
//set the frame properties
|
|
s_state->fb->width = resolution[s_state->sensor.status.framesize].width;
|
|
s_state->fb->height = resolution[s_state->sensor.status.framesize].height;
|
|
s_state->fb->format = s_state->sensor.pixformat;
|
|
|
|
uint64_t us = (uint64_t)esp_timer_get_time();
|
|
s_state->fb->timestamp.tv_sec = us / 1000000UL;
|
|
s_state->fb->timestamp.tv_usec = us % 1000000UL;
|
|
}
|
|
s_state->dma_filtered_count++;
|
|
}
|
|
|
|
static void IRAM_ATTR dma_filter_task(void *pvParameters)
|
|
{
|
|
s_state->dma_filtered_count = 0;
|
|
while (true) {
|
|
size_t buf_idx;
|
|
if(xQueueReceive(s_state->data_ready, &buf_idx, portMAX_DELAY) == pdTRUE) {
|
|
if (buf_idx == SIZE_MAX) {
|
|
//this is the end of the frame
|
|
dma_finish_frame();
|
|
} else {
|
|
dma_filter_buffer(buf_idx);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
static void IRAM_ATTR dma_filter_jpeg(const dma_elem_t* src, lldesc_t* dma_desc, uint8_t* dst)
|
|
{
|
|
size_t end = dma_desc->length / sizeof(dma_elem_t) / 4;
|
|
// manually unrolling 4 iterations of the loop here
|
|
for (size_t i = 0; i < end; ++i) {
|
|
dst[0] = src[0].sample1;
|
|
dst[1] = src[1].sample1;
|
|
dst[2] = src[2].sample1;
|
|
dst[3] = src[3].sample1;
|
|
src += 4;
|
|
dst += 4;
|
|
}
|
|
}
|
|
|
|
static void IRAM_ATTR dma_filter_grayscale(const dma_elem_t* src, lldesc_t* dma_desc, uint8_t* dst)
|
|
{
|
|
size_t end = dma_desc->length / sizeof(dma_elem_t) / 4;
|
|
for (size_t i = 0; i < end; ++i) {
|
|
// manually unrolling 4 iterations of the loop here
|
|
dst[0] = src[0].sample1;
|
|
dst[1] = src[1].sample1;
|
|
dst[2] = src[2].sample1;
|
|
dst[3] = src[3].sample1;
|
|
src += 4;
|
|
dst += 4;
|
|
}
|
|
}
|
|
|
|
static void IRAM_ATTR dma_filter_grayscale_highspeed(const dma_elem_t* src, lldesc_t* dma_desc, uint8_t* dst)
|
|
{
|
|
size_t end = dma_desc->length / sizeof(dma_elem_t) / 8;
|
|
for (size_t i = 0; i < end; ++i) {
|
|
// manually unrolling 4 iterations of the loop here
|
|
dst[0] = src[0].sample1;
|
|
dst[1] = src[2].sample1;
|
|
dst[2] = src[4].sample1;
|
|
dst[3] = src[6].sample1;
|
|
src += 8;
|
|
dst += 4;
|
|
}
|
|
// the final sample of a line in SM_0A0B_0B0C sampling mode needs special handling
|
|
if ((dma_desc->length & 0x7) != 0) {
|
|
dst[0] = src[0].sample1;
|
|
dst[1] = src[2].sample1;
|
|
}
|
|
}
|
|
|
|
static void IRAM_ATTR dma_filter_yuyv(const dma_elem_t* src, lldesc_t* dma_desc, uint8_t* dst)
|
|
{
|
|
size_t end = dma_desc->length / sizeof(dma_elem_t) / 4;
|
|
for (size_t i = 0; i < end; ++i) {
|
|
dst[0] = src[0].sample1;//y0
|
|
dst[1] = src[0].sample2;//u
|
|
dst[2] = src[1].sample1;//y1
|
|
dst[3] = src[1].sample2;//v
|
|
|
|
dst[4] = src[2].sample1;//y0
|
|
dst[5] = src[2].sample2;//u
|
|
dst[6] = src[3].sample1;//y1
|
|
dst[7] = src[3].sample2;//v
|
|
src += 4;
|
|
dst += 8;
|
|
}
|
|
}
|
|
|
|
static void IRAM_ATTR dma_filter_yuyv_highspeed(const dma_elem_t* src, lldesc_t* dma_desc, uint8_t* dst)
|
|
{
|
|
size_t end = dma_desc->length / sizeof(dma_elem_t) / 8;
|
|
for (size_t i = 0; i < end; ++i) {
|
|
dst[0] = src[0].sample1;//y0
|
|
dst[1] = src[1].sample1;//u
|
|
dst[2] = src[2].sample1;//y1
|
|
dst[3] = src[3].sample1;//v
|
|
|
|
dst[4] = src[4].sample1;//y0
|
|
dst[5] = src[5].sample1;//u
|
|
dst[6] = src[6].sample1;//y1
|
|
dst[7] = src[7].sample1;//v
|
|
src += 8;
|
|
dst += 8;
|
|
}
|
|
if ((dma_desc->length & 0x7) != 0) {
|
|
dst[0] = src[0].sample1;//y0
|
|
dst[1] = src[1].sample1;//u
|
|
dst[2] = src[2].sample1;//y1
|
|
dst[3] = src[2].sample2;//v
|
|
}
|
|
}
|
|
|
|
static void IRAM_ATTR dma_filter_rgb888(const dma_elem_t* src, lldesc_t* dma_desc, uint8_t* dst)
|
|
{
|
|
size_t end = dma_desc->length / sizeof(dma_elem_t) / 4;
|
|
uint8_t lb, hb;
|
|
for (size_t i = 0; i < end; ++i) {
|
|
hb = src[0].sample1;
|
|
lb = src[0].sample2;
|
|
dst[0] = (lb & 0x1F) << 3;
|
|
dst[1] = (hb & 0x07) << 5 | (lb & 0xE0) >> 3;
|
|
dst[2] = hb & 0xF8;
|
|
|
|
hb = src[1].sample1;
|
|
lb = src[1].sample2;
|
|
dst[3] = (lb & 0x1F) << 3;
|
|
dst[4] = (hb & 0x07) << 5 | (lb & 0xE0) >> 3;
|
|
dst[5] = hb & 0xF8;
|
|
|
|
hb = src[2].sample1;
|
|
lb = src[2].sample2;
|
|
dst[6] = (lb & 0x1F) << 3;
|
|
dst[7] = (hb & 0x07) << 5 | (lb & 0xE0) >> 3;
|
|
dst[8] = hb & 0xF8;
|
|
|
|
hb = src[3].sample1;
|
|
lb = src[3].sample2;
|
|
dst[9] = (lb & 0x1F) << 3;
|
|
dst[10] = (hb & 0x07) << 5 | (lb & 0xE0) >> 3;
|
|
dst[11] = hb & 0xF8;
|
|
src += 4;
|
|
dst += 12;
|
|
}
|
|
}
|
|
|
|
static void IRAM_ATTR dma_filter_rgb888_highspeed(const dma_elem_t* src, lldesc_t* dma_desc, uint8_t* dst)
|
|
{
|
|
size_t end = dma_desc->length / sizeof(dma_elem_t) / 8;
|
|
uint8_t lb, hb;
|
|
for (size_t i = 0; i < end; ++i) {
|
|
hb = src[0].sample1;
|
|
lb = src[1].sample1;
|
|
dst[0] = (lb & 0x1F) << 3;
|
|
dst[1] = (hb & 0x07) << 5 | (lb & 0xE0) >> 3;
|
|
dst[2] = hb & 0xF8;
|
|
|
|
hb = src[2].sample1;
|
|
lb = src[3].sample1;
|
|
dst[3] = (lb & 0x1F) << 3;
|
|
dst[4] = (hb & 0x07) << 5 | (lb & 0xE0) >> 3;
|
|
dst[5] = hb & 0xF8;
|
|
|
|
hb = src[4].sample1;
|
|
lb = src[5].sample1;
|
|
dst[6] = (lb & 0x1F) << 3;
|
|
dst[7] = (hb & 0x07) << 5 | (lb & 0xE0) >> 3;
|
|
dst[8] = hb & 0xF8;
|
|
|
|
hb = src[6].sample1;
|
|
lb = src[7].sample1;
|
|
dst[9] = (lb & 0x1F) << 3;
|
|
dst[10] = (hb & 0x07) << 5 | (lb & 0xE0) >> 3;
|
|
dst[11] = hb & 0xF8;
|
|
|
|
src += 8;
|
|
dst += 12;
|
|
}
|
|
if ((dma_desc->length & 0x7) != 0) {
|
|
hb = src[0].sample1;
|
|
lb = src[1].sample1;
|
|
dst[0] = (lb & 0x1F) << 3;
|
|
dst[1] = (hb & 0x07) << 5 | (lb & 0xE0) >> 3;
|
|
dst[2] = hb & 0xF8;
|
|
|
|
hb = src[2].sample1;
|
|
lb = src[2].sample2;
|
|
dst[3] = (lb & 0x1F) << 3;
|
|
dst[4] = (hb & 0x07) << 5 | (lb & 0xE0) >> 3;
|
|
dst[5] = hb & 0xF8;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Public Methods
|
|
* */
|
|
|
|
esp_err_t camera_probe(const camera_config_t* config, camera_model_t* out_camera_model)
|
|
{
|
|
if (s_state != NULL) {
|
|
return ESP_ERR_INVALID_STATE;
|
|
}
|
|
|
|
s_state = (camera_state_t*) calloc(sizeof(*s_state), 1);
|
|
if (!s_state) {
|
|
return ESP_ERR_NO_MEM;
|
|
}
|
|
|
|
ESP_LOGD(TAG, "Enabling XCLK output");
|
|
camera_enable_out_clock(config);
|
|
|
|
ESP_LOGD(TAG, "Initializing SSCB");
|
|
SCCB_Init(config->pin_sscb_sda, config->pin_sscb_scl);
|
|
|
|
if(config->pin_pwdn >= 0) {
|
|
ESP_LOGD(TAG, "Resetting camera by power down line");
|
|
gpio_config_t conf = { 0 };
|
|
conf.pin_bit_mask = 1LL << config->pin_pwdn;
|
|
conf.mode = GPIO_MODE_OUTPUT;
|
|
gpio_config(&conf);
|
|
|
|
// carefull, logic is inverted compared to reset pin
|
|
gpio_set_level(config->pin_pwdn, 1);
|
|
vTaskDelay(10 / portTICK_PERIOD_MS);
|
|
gpio_set_level(config->pin_pwdn, 0);
|
|
vTaskDelay(10 / portTICK_PERIOD_MS);
|
|
}
|
|
|
|
if(config->pin_reset >= 0) {
|
|
ESP_LOGD(TAG, "Resetting camera");
|
|
gpio_config_t conf = { 0 };
|
|
conf.pin_bit_mask = 1LL << config->pin_reset;
|
|
conf.mode = GPIO_MODE_OUTPUT;
|
|
gpio_config(&conf);
|
|
|
|
gpio_set_level(config->pin_reset, 0);
|
|
vTaskDelay(10 / portTICK_PERIOD_MS);
|
|
gpio_set_level(config->pin_reset, 1);
|
|
vTaskDelay(10 / portTICK_PERIOD_MS);
|
|
}
|
|
|
|
ESP_LOGD(TAG, "Searching for camera address");
|
|
vTaskDelay(10 / portTICK_PERIOD_MS);
|
|
uint8_t slv_addr = SCCB_Probe();
|
|
if (slv_addr == 0) {
|
|
*out_camera_model = CAMERA_NONE;
|
|
camera_disable_out_clock();
|
|
return ESP_ERR_CAMERA_NOT_DETECTED;
|
|
}
|
|
|
|
//slv_addr = 0x30;
|
|
ESP_LOGD(TAG, "Detected camera at address=0x%02x", slv_addr);
|
|
sensor_id_t* id = &s_state->sensor.id;
|
|
|
|
#if CONFIG_OV2640_SUPPORT
|
|
if (slv_addr == 0x30) {
|
|
ESP_LOGD(TAG, "Resetting OV2640");
|
|
//camera might be OV2640. try to reset it
|
|
SCCB_Write(0x30, 0xFF, 0x01);//bank sensor
|
|
SCCB_Write(0x30, 0x12, 0x80);//reset
|
|
vTaskDelay(10 / portTICK_PERIOD_MS);
|
|
slv_addr = SCCB_Probe();
|
|
}
|
|
#endif
|
|
|
|
s_state->sensor.slv_addr = slv_addr;
|
|
s_state->sensor.xclk_freq_hz = config->xclk_freq_hz;
|
|
|
|
#if (CONFIG_OV3660_SUPPORT || CONFIG_OV5640_SUPPORT)
|
|
if(s_state->sensor.slv_addr == 0x3c){
|
|
id->PID = SCCB_Read16(s_state->sensor.slv_addr, REG16_CHIDH);
|
|
id->VER = SCCB_Read16(s_state->sensor.slv_addr, REG16_CHIDL);
|
|
vTaskDelay(10 / portTICK_PERIOD_MS);
|
|
ESP_LOGD(TAG, "Camera PID=0x%02x VER=0x%02x", id->PID, id->VER);
|
|
} else {
|
|
#endif
|
|
id->PID = SCCB_Read(s_state->sensor.slv_addr, REG_PID);
|
|
id->VER = SCCB_Read(s_state->sensor.slv_addr, REG_VER);
|
|
id->MIDL = SCCB_Read(s_state->sensor.slv_addr, REG_MIDL);
|
|
id->MIDH = SCCB_Read(s_state->sensor.slv_addr, REG_MIDH);
|
|
vTaskDelay(10 / portTICK_PERIOD_MS);
|
|
ESP_LOGD(TAG, "Camera PID=0x%02x VER=0x%02x MIDL=0x%02x MIDH=0x%02x",
|
|
id->PID, id->VER, id->MIDH, id->MIDL);
|
|
|
|
#if (CONFIG_OV3660_SUPPORT || CONFIG_OV5640_SUPPORT)
|
|
}
|
|
#endif
|
|
|
|
|
|
switch (id->PID) {
|
|
#if CONFIG_OV2640_SUPPORT
|
|
case OV2640_PID:
|
|
*out_camera_model = CAMERA_OV2640;
|
|
ov2640_init(&s_state->sensor);
|
|
break;
|
|
#endif
|
|
#if CONFIG_OV7725_SUPPORT
|
|
case OV7725_PID:
|
|
*out_camera_model = CAMERA_OV7725;
|
|
ov7725_init(&s_state->sensor);
|
|
break;
|
|
#endif
|
|
#if CONFIG_OV3660_SUPPORT
|
|
case OV3660_PID:
|
|
*out_camera_model = CAMERA_OV3660;
|
|
ov3660_init(&s_state->sensor);
|
|
break;
|
|
#endif
|
|
#if CONFIG_OV5640_SUPPORT
|
|
case OV5640_PID:
|
|
*out_camera_model = CAMERA_OV5640;
|
|
ov5640_init(&s_state->sensor);
|
|
break;
|
|
#endif
|
|
default:
|
|
id->PID = 0;
|
|
*out_camera_model = CAMERA_UNKNOWN;
|
|
camera_disable_out_clock();
|
|
ESP_LOGE(TAG, "Detected camera not supported.");
|
|
return ESP_ERR_CAMERA_NOT_SUPPORTED;
|
|
}
|
|
|
|
ESP_LOGD(TAG, "Doing SW reset of sensor");
|
|
s_state->sensor.reset(&s_state->sensor);
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t camera_init(const camera_config_t* config)
|
|
{
|
|
if (!s_state) {
|
|
return ESP_ERR_INVALID_STATE;
|
|
}
|
|
if (s_state->sensor.id.PID == 0) {
|
|
return ESP_ERR_CAMERA_NOT_SUPPORTED;
|
|
}
|
|
memcpy(&s_state->config, config, sizeof(*config));
|
|
esp_err_t err = ESP_OK;
|
|
framesize_t frame_size = (framesize_t) config->frame_size;
|
|
pixformat_t pix_format = (pixformat_t) config->pixel_format;
|
|
|
|
switch (s_state->sensor.id.PID) {
|
|
#if CONFIG_OV2640_SUPPORT
|
|
case OV2640_PID:
|
|
if (frame_size > FRAMESIZE_UXGA) {
|
|
frame_size = FRAMESIZE_UXGA;
|
|
}
|
|
break;
|
|
#endif
|
|
#if CONFIG_OV7725_SUPPORT
|
|
case OV7725_PID:
|
|
if (frame_size > FRAMESIZE_VGA) {
|
|
frame_size = FRAMESIZE_VGA;
|
|
}
|
|
break;
|
|
#endif
|
|
#if CONFIG_OV3660_SUPPORT
|
|
case OV3660_PID:
|
|
if (frame_size > FRAMESIZE_QXGA) {
|
|
frame_size = FRAMESIZE_QXGA;
|
|
}
|
|
break;
|
|
#endif
|
|
#if CONFIG_OV5640_SUPPORT
|
|
case OV5640_PID:
|
|
if (frame_size > FRAMESIZE_QSXGA) {
|
|
frame_size = FRAMESIZE_QSXGA;
|
|
}
|
|
break;
|
|
#endif
|
|
default:
|
|
return ESP_ERR_CAMERA_NOT_SUPPORTED;
|
|
}
|
|
|
|
s_state->width = resolution[frame_size].width;
|
|
s_state->height = resolution[frame_size].height;
|
|
|
|
if (pix_format == PIXFORMAT_GRAYSCALE) {
|
|
s_state->fb_size = s_state->width * s_state->height;
|
|
if (s_state->sensor.id.PID == OV3660_PID || s_state->sensor.id.PID == OV5640_PID) {
|
|
if (is_hs_mode()) {
|
|
s_state->sampling_mode = SM_0A00_0B00;
|
|
s_state->dma_filter = &dma_filter_yuyv_highspeed;
|
|
} else {
|
|
s_state->sampling_mode = SM_0A0B_0C0D;
|
|
s_state->dma_filter = &dma_filter_yuyv;
|
|
}
|
|
s_state->in_bytes_per_pixel = 1; // camera sends Y8
|
|
} else {
|
|
if (is_hs_mode() && s_state->sensor.id.PID != OV7725_PID) {
|
|
s_state->sampling_mode = SM_0A00_0B00;
|
|
s_state->dma_filter = &dma_filter_grayscale_highspeed;
|
|
} else {
|
|
s_state->sampling_mode = SM_0A0B_0C0D;
|
|
s_state->dma_filter = &dma_filter_grayscale;
|
|
}
|
|
s_state->in_bytes_per_pixel = 2; // camera sends YU/YV
|
|
}
|
|
s_state->fb_bytes_per_pixel = 1; // frame buffer stores Y8
|
|
} else if (pix_format == PIXFORMAT_YUV422 || pix_format == PIXFORMAT_RGB565) {
|
|
s_state->fb_size = s_state->width * s_state->height * 2;
|
|
if (is_hs_mode() && s_state->sensor.id.PID != OV7725_PID) {
|
|
s_state->sampling_mode = SM_0A00_0B00;
|
|
s_state->dma_filter = &dma_filter_yuyv_highspeed;
|
|
} else {
|
|
s_state->sampling_mode = SM_0A0B_0C0D;
|
|
s_state->dma_filter = &dma_filter_yuyv;
|
|
}
|
|
s_state->in_bytes_per_pixel = 2; // camera sends YU/YV
|
|
s_state->fb_bytes_per_pixel = 2; // frame buffer stores YU/YV/RGB565
|
|
} else if (pix_format == PIXFORMAT_RGB888) {
|
|
s_state->fb_size = s_state->width * s_state->height * 3;
|
|
if (is_hs_mode()) {
|
|
s_state->sampling_mode = SM_0A00_0B00;
|
|
s_state->dma_filter = &dma_filter_rgb888_highspeed;
|
|
} else {
|
|
s_state->sampling_mode = SM_0A0B_0C0D;
|
|
s_state->dma_filter = &dma_filter_rgb888;
|
|
}
|
|
s_state->in_bytes_per_pixel = 2; // camera sends RGB565
|
|
s_state->fb_bytes_per_pixel = 3; // frame buffer stores RGB888
|
|
} else if (pix_format == PIXFORMAT_JPEG) {
|
|
if (s_state->sensor.id.PID != OV2640_PID && s_state->sensor.id.PID != OV3660_PID && s_state->sensor.id.PID != OV5640_PID) {
|
|
ESP_LOGE(TAG, "JPEG format is only supported for ov2640, ov3660 and ov5640");
|
|
err = ESP_ERR_NOT_SUPPORTED;
|
|
goto fail;
|
|
}
|
|
int qp = config->jpeg_quality;
|
|
int compression_ratio_bound = 1;
|
|
if (qp > 10) {
|
|
compression_ratio_bound = 16;
|
|
} else if (qp > 5) {
|
|
compression_ratio_bound = 10;
|
|
} else {
|
|
compression_ratio_bound = 4;
|
|
}
|
|
(*s_state->sensor.set_quality)(&s_state->sensor, qp);
|
|
s_state->in_bytes_per_pixel = 2;
|
|
s_state->fb_bytes_per_pixel = 2;
|
|
s_state->fb_size = (s_state->width * s_state->height * s_state->fb_bytes_per_pixel) / compression_ratio_bound;
|
|
s_state->dma_filter = &dma_filter_jpeg;
|
|
s_state->sampling_mode = SM_0A00_0B00;
|
|
} else {
|
|
ESP_LOGE(TAG, "Requested format is not supported");
|
|
err = ESP_ERR_NOT_SUPPORTED;
|
|
goto fail;
|
|
}
|
|
|
|
ESP_LOGD(TAG, "in_bpp: %d, fb_bpp: %d, fb_size: %d, mode: %d, width: %d height: %d",
|
|
s_state->in_bytes_per_pixel, s_state->fb_bytes_per_pixel,
|
|
s_state->fb_size, s_state->sampling_mode,
|
|
s_state->width, s_state->height);
|
|
|
|
i2s_init();
|
|
|
|
err = dma_desc_init();
|
|
if (err != ESP_OK) {
|
|
ESP_LOGE(TAG, "Failed to initialize I2S and DMA");
|
|
goto fail;
|
|
}
|
|
|
|
//s_state->fb_size = 75 * 1024;
|
|
err = camera_fb_init(s_state->config.fb_count);
|
|
if (err != ESP_OK) {
|
|
ESP_LOGE(TAG, "Failed to allocate frame buffer");
|
|
goto fail;
|
|
}
|
|
|
|
s_state->data_ready = xQueueCreate(16, sizeof(size_t));
|
|
if (s_state->data_ready == NULL) {
|
|
ESP_LOGE(TAG, "Failed to dma queue");
|
|
err = ESP_ERR_NO_MEM;
|
|
goto fail;
|
|
}
|
|
|
|
if(s_state->config.fb_count == 1) {
|
|
s_state->frame_ready = xSemaphoreCreateBinary();
|
|
if (s_state->frame_ready == NULL) {
|
|
ESP_LOGE(TAG, "Failed to create semaphore");
|
|
err = ESP_ERR_NO_MEM;
|
|
goto fail;
|
|
}
|
|
} else {
|
|
s_state->fb_in = xQueueCreate(s_state->config.fb_count, sizeof(camera_fb_t *));
|
|
s_state->fb_out = xQueueCreate(1, sizeof(camera_fb_t *));
|
|
if (s_state->fb_in == NULL || s_state->fb_out == NULL) {
|
|
ESP_LOGE(TAG, "Failed to fb queues");
|
|
err = ESP_ERR_NO_MEM;
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
//ToDo: core affinity?
|
|
#if CONFIG_CAMERA_CORE0
|
|
if (!xTaskCreatePinnedToCore(&dma_filter_task, "dma_filter", 4096, NULL, 10, &s_state->dma_filter_task, 0))
|
|
#elif CONFIG_CAMERA_CORE1
|
|
if (!xTaskCreatePinnedToCore(&dma_filter_task, "dma_filter", 4096, NULL, 10, &s_state->dma_filter_task, 1))
|
|
#else
|
|
if (!xTaskCreate(&dma_filter_task, "dma_filter", 4096, NULL, 10, &s_state->dma_filter_task))
|
|
#endif
|
|
{
|
|
ESP_LOGE(TAG, "Failed to create DMA filter task");
|
|
err = ESP_ERR_NO_MEM;
|
|
goto fail;
|
|
}
|
|
|
|
vsync_intr_disable();
|
|
err = gpio_install_isr_service(ESP_INTR_FLAG_LEVEL1 | ESP_INTR_FLAG_IRAM);
|
|
if (err != ESP_OK) {
|
|
ESP_LOGE(TAG, "gpio_install_isr_service failed (%x)", err);
|
|
goto fail;
|
|
}
|
|
err = gpio_isr_handler_add(s_state->config.pin_vsync, &vsync_isr, NULL);
|
|
if (err != ESP_OK) {
|
|
ESP_LOGE(TAG, "vsync_isr_handler_add failed (%x)", err);
|
|
goto fail;
|
|
}
|
|
|
|
s_state->sensor.status.framesize = frame_size;
|
|
s_state->sensor.pixformat = pix_format;
|
|
ESP_LOGD(TAG, "Setting frame size to %dx%d", s_state->width, s_state->height);
|
|
if (s_state->sensor.set_framesize(&s_state->sensor, frame_size) != 0) {
|
|
ESP_LOGE(TAG, "Failed to set frame size");
|
|
err = ESP_ERR_CAMERA_FAILED_TO_SET_FRAME_SIZE;
|
|
goto fail;
|
|
}
|
|
s_state->sensor.set_pixformat(&s_state->sensor, pix_format);
|
|
|
|
if (s_state->sensor.id.PID == OV2640_PID) {
|
|
s_state->sensor.set_gainceiling(&s_state->sensor, GAINCEILING_2X);
|
|
s_state->sensor.set_bpc(&s_state->sensor, false);
|
|
s_state->sensor.set_wpc(&s_state->sensor, true);
|
|
s_state->sensor.set_lenc(&s_state->sensor, true);
|
|
}
|
|
|
|
if (skip_frame()) {
|
|
err = ESP_ERR_CAMERA_FAILED_TO_SET_OUT_FORMAT;
|
|
goto fail;
|
|
}
|
|
//todo: for some reason the first set of the quality does not work.
|
|
if (pix_format == PIXFORMAT_JPEG) {
|
|
(*s_state->sensor.set_quality)(&s_state->sensor, config->jpeg_quality);
|
|
}
|
|
s_state->sensor.init_status(&s_state->sensor);
|
|
return ESP_OK;
|
|
|
|
fail:
|
|
esp_camera_deinit();
|
|
return err;
|
|
}
|
|
|
|
esp_err_t esp_camera_init(const camera_config_t* config)
|
|
{
|
|
camera_model_t camera_model = CAMERA_NONE;
|
|
esp_err_t err = camera_probe(config, &camera_model);
|
|
if (err != ESP_OK) {
|
|
ESP_LOGE(TAG, "Camera probe failed with error 0x%x", err);
|
|
goto fail;
|
|
}
|
|
if (camera_model == CAMERA_OV7725) {
|
|
ESP_LOGD(TAG, "Detected OV7725 camera");
|
|
if(config->pixel_format == PIXFORMAT_JPEG) {
|
|
ESP_LOGE(TAG, "Camera does not support JPEG");
|
|
err = ESP_ERR_CAMERA_NOT_SUPPORTED;
|
|
goto fail;
|
|
}
|
|
} else if (camera_model == CAMERA_OV2640) {
|
|
ESP_LOGD(TAG, "Detected OV2640 camera");
|
|
} else if (camera_model == CAMERA_OV3660) {
|
|
ESP_LOGD(TAG, "Detected OV3660 camera");
|
|
} else if (camera_model == CAMERA_OV5640) {
|
|
ESP_LOGD(TAG, "Detected OV5640 camera");
|
|
} else {
|
|
ESP_LOGE(TAG, "Camera not supported");
|
|
err = ESP_ERR_CAMERA_NOT_SUPPORTED;
|
|
goto fail;
|
|
}
|
|
err = camera_init(config);
|
|
if (err != ESP_OK) {
|
|
ESP_LOGE(TAG, "Camera init failed with error 0x%x", err);
|
|
return err;
|
|
}
|
|
return ESP_OK;
|
|
|
|
fail:
|
|
free(s_state);
|
|
s_state = NULL;
|
|
camera_disable_out_clock();
|
|
return err;
|
|
}
|
|
|
|
esp_err_t esp_camera_deinit()
|
|
{
|
|
if (s_state == NULL) {
|
|
return ESP_ERR_INVALID_STATE;
|
|
}
|
|
if (s_state->dma_filter_task) {
|
|
vTaskDelete(s_state->dma_filter_task);
|
|
}
|
|
if (s_state->data_ready) {
|
|
vQueueDelete(s_state->data_ready);
|
|
}
|
|
if (s_state->fb_in) {
|
|
vQueueDelete(s_state->fb_in);
|
|
}
|
|
if (s_state->fb_out) {
|
|
vQueueDelete(s_state->fb_out);
|
|
}
|
|
if (s_state->frame_ready) {
|
|
vSemaphoreDelete(s_state->frame_ready);
|
|
}
|
|
gpio_isr_handler_remove(s_state->config.pin_vsync);
|
|
if (s_state->i2s_intr_handle) {
|
|
esp_intr_disable(s_state->i2s_intr_handle);
|
|
esp_intr_free(s_state->i2s_intr_handle);
|
|
}
|
|
dma_desc_deinit();
|
|
camera_fb_deinit();
|
|
free(s_state);
|
|
s_state = NULL;
|
|
camera_disable_out_clock();
|
|
periph_module_disable(PERIPH_I2S0_MODULE);
|
|
return ESP_OK;
|
|
}
|
|
|
|
#define FB_GET_TIMEOUT (4000 / portTICK_PERIOD_MS)
|
|
|
|
camera_fb_t* esp_camera_fb_get()
|
|
{
|
|
if (s_state == NULL) {
|
|
return NULL;
|
|
}
|
|
if(!I2S0.conf.rx_start) {
|
|
if(s_state->config.fb_count > 1) {
|
|
ESP_LOGD(TAG, "i2s_run");
|
|
}
|
|
if (i2s_run() != 0) {
|
|
return NULL;
|
|
}
|
|
}
|
|
bool need_yield = false;
|
|
if (s_state->config.fb_count == 1) {
|
|
if (xSemaphoreTake(s_state->frame_ready, FB_GET_TIMEOUT) != pdTRUE){
|
|
i2s_stop(&need_yield);
|
|
ESP_LOGE(TAG, "Failed to get the frame on time!");
|
|
return NULL;
|
|
}
|
|
return (camera_fb_t*)s_state->fb;
|
|
}
|
|
camera_fb_int_t * fb = NULL;
|
|
if(s_state->fb_out) {
|
|
if (xQueueReceive(s_state->fb_out, &fb, FB_GET_TIMEOUT) != pdTRUE) {
|
|
i2s_stop(&need_yield);
|
|
ESP_LOGE(TAG, "Failed to get the frame on time!");
|
|
return NULL;
|
|
}
|
|
}
|
|
return (camera_fb_t*)fb;
|
|
}
|
|
|
|
void esp_camera_fb_return(camera_fb_t * fb)
|
|
{
|
|
if(fb == NULL || s_state == NULL || s_state->config.fb_count == 1 || s_state->fb_in == NULL) {
|
|
return;
|
|
}
|
|
xQueueSend(s_state->fb_in, &fb, portMAX_DELAY);
|
|
}
|
|
|
|
sensor_t * esp_camera_sensor_get()
|
|
{
|
|
if (s_state == NULL) {
|
|
return NULL;
|
|
}
|
|
return &s_state->sensor;
|
|
}
|
|
|
|
esp_err_t esp_camera_save_to_nvs(const char *key)
|
|
{
|
|
#ifdef ESP_IDF_VERSION_MAJOR
|
|
nvs_handle_t handle;
|
|
#else
|
|
nvs_handle handle;
|
|
#endif
|
|
esp_err_t ret = nvs_open(key,NVS_READWRITE,&handle);
|
|
|
|
if (ret == ESP_OK) {
|
|
sensor_t *s = esp_camera_sensor_get();
|
|
if (s != NULL) {
|
|
ret = nvs_set_blob(handle,CAMERA_SENSOR_NVS_KEY,&s->status,sizeof(camera_status_t));
|
|
if (ret == ESP_OK) {
|
|
uint8_t pf = s->pixformat;
|
|
ret = nvs_set_u8(handle,CAMERA_PIXFORMAT_NVS_KEY,pf);
|
|
}
|
|
return ret;
|
|
} else {
|
|
return ESP_ERR_CAMERA_NOT_DETECTED;
|
|
}
|
|
nvs_close(handle);
|
|
return ret;
|
|
} else {
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
esp_err_t esp_camera_load_from_nvs(const char *key)
|
|
{
|
|
#ifdef ESP_IDF_VERSION_MAJOR
|
|
nvs_handle_t handle;
|
|
#else
|
|
nvs_handle handle;
|
|
#endif
|
|
uint8_t pf;
|
|
|
|
esp_err_t ret = nvs_open(key,NVS_READWRITE,&handle);
|
|
|
|
if (ret == ESP_OK) {
|
|
sensor_t *s = esp_camera_sensor_get();
|
|
camera_status_t st;
|
|
if (s != NULL) {
|
|
size_t size = sizeof(camera_status_t);
|
|
ret = nvs_get_blob(handle,CAMERA_SENSOR_NVS_KEY,&st,&size);
|
|
if (ret == ESP_OK) {
|
|
s->set_ae_level(s,st.ae_level);
|
|
s->set_aec2(s,st.aec2);
|
|
s->set_aec_value(s,st.aec_value);
|
|
s->set_agc_gain(s,st.agc_gain);
|
|
s->set_awb_gain(s,st.awb_gain);
|
|
s->set_bpc(s,st.bpc);
|
|
s->set_brightness(s,st.brightness);
|
|
s->set_colorbar(s,st.colorbar);
|
|
s->set_contrast(s,st.contrast);
|
|
s->set_dcw(s,st.dcw);
|
|
s->set_denoise(s,st.denoise);
|
|
s->set_exposure_ctrl(s,st.aec);
|
|
s->set_framesize(s,st.framesize);
|
|
s->set_gain_ctrl(s,st.agc);
|
|
s->set_gainceiling(s,st.gainceiling);
|
|
s->set_hmirror(s,st.hmirror);
|
|
s->set_lenc(s,st.lenc);
|
|
s->set_quality(s,st.quality);
|
|
s->set_raw_gma(s,st.raw_gma);
|
|
s->set_saturation(s,st.saturation);
|
|
s->set_sharpness(s,st.sharpness);
|
|
s->set_special_effect(s,st.special_effect);
|
|
s->set_vflip(s,st.vflip);
|
|
s->set_wb_mode(s,st.wb_mode);
|
|
s->set_whitebal(s,st.awb);
|
|
s->set_wpc(s,st.wpc);
|
|
}
|
|
ret = nvs_get_u8(handle,CAMERA_PIXFORMAT_NVS_KEY,&pf);
|
|
if (ret == ESP_OK) {
|
|
s->set_pixformat(s,pf);
|
|
}
|
|
} else {
|
|
return ESP_ERR_CAMERA_NOT_DETECTED;
|
|
}
|
|
nvs_close(handle);
|
|
return ret;
|
|
} else {
|
|
ESP_LOGW(TAG,"Error (%d) opening nvs key \"%s\"",ret,key);
|
|
return ret;
|
|
}
|
|
}
|