You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

212 lines
10 KiB

This file contains ambiguous Unicode characters!

This file contains ambiguous Unicode characters that may be confused with others in your current locale. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to highlight these characters.

/*
* OV3660 register definitions.
*/
#ifndef __OV3660_REG_REGS_H__
#define __OV3660_REG_REGS_H__
/* system control registers */
#define SYSTEM_CTROL0 0x3008 // Bit[7]: Software reset
// Bit[6]: Software power down
// Bit[5]: Reserved
// Bit[4]: SRB clock SYNC enable
// Bit[3]: Isolation suspend select
// Bit[2:0]: Not used
/* output format control registers */
#define FORMAT_CTRL 0x501F // Format select
// Bit[2:0]:
// 000: YUV422
// 001: RGB
// 010: Dither
// 011: RAW after DPC
// 101: RAW after CIP
/* format control registers */
#define FORMAT_CTRL00 0x4300
/* frame control registers */
#define FRAME_CTRL01 0x4201 // Control Passed Frame Number When both ON and OFF number set to 0x00,frame control is in bypass mode
// Bit[7:4]: Not used
// Bit[3:0]: Frame ON number
#define FRAME_CTRL02 0x4202 // Control Masked Frame Number When both ON and OFF number set to 0x00,frame control is in bypass mode
// Bit[7:4]: Not used
// BIT[3:0]: Frame OFF number
/* ISP top control registers */
#define PRE_ISP_TEST_SETTING_1 0x503D // Bit[7]: Test enable
// 0: Test disable
// 1: Color bar enable
// Bit[6]: Rolling
// Bit[5]: Transparent
// Bit[4]: Square black and white
// Bit[3:2]: Color bar style
// 00: Standard 8 color bar
// 01: Gradual change at vertical mode 1
// 10: Gradual change at horizontal
// 11: Gradual change at vertical mode 2
// Bit[1:0]: Test select
// 00: Color bar
// 01: Random data
// 10: Square data
// 11: Black image
//exposure = {0x3500[3:0], 0x3501[7:0], 0x3502[7:0]} / 16 × tROW
/* AEC/AGC control functions */
#define AEC_PK_MANUAL 0x3503 // AEC Manual Mode Control
// Bit[7:6]: Reserved
// Bit[5]: Gain delay option
// Valid when 0x3503[4]=1b0
// 0: Delay one frame latch
// 1: One frame latch
// Bit[4:2]: Reserved
// Bit[1]: AGC manual
// 0: Auto enable
// 1: Manual enable
// Bit[0]: AEC manual
// 0: Auto enable
// 1: Manual enable
//gain = {0x350A[1:0], 0x350B[7:0]} / 16
/* mirror and flip registers */
#define TIMING_TC_REG20 0x3820 // Timing Control Register
// Bit[2:1]: Vertical flip enable
// 00: Normal
// 11: Vertical flip
// Bit[0]: Vertical binning enable
#define TIMING_TC_REG21 0x3821 // Timing Control Register
// Bit[5]: Compression Enable
// Bit[2:1]: Horizontal mirror enable
// 00: Normal
// 11: Horizontal mirror
// Bit[0]: Horizontal binning enable
#define CLOCK_POL_CONTROL 0x4740// Bit[5]: PCLK polarity 0: active low
// 1: active high
// Bit[3]: Gate PCLK under VSYNC
// Bit[2]: Gate PCLK under HREF
// Bit[1]: HREF polarity
// 0: active low
// 1: active high
// Bit[0] VSYNC polarity
// 0: active low
// 1: active high
#define DRIVE_CAPABILITY 0x302c // Bit[7:6]:
// 00: 1x
// 01: 2x
// 10: 3x
// 11: 4x
#define X_ADDR_ST_H 0x3800 //Bit[3:0]: X address start[11:8]
#define X_ADDR_ST_L 0x3801 //Bit[7:0]: X address start[7:0]
#define Y_ADDR_ST_H 0x3802 //Bit[2:0]: Y address start[10:8]
#define Y_ADDR_ST_L 0x3803 //Bit[7:0]: Y address start[7:0]
#define X_ADDR_END_H 0x3804 //Bit[3:0]: X address end[11:8]
#define X_ADDR_END_L 0x3805 //Bit[7:0]:
#define Y_ADDR_END_H 0x3806 //Bit[2:0]: Y address end[10:8]
#define Y_ADDR_END_L 0x3807 //Bit[7:0]:
// Size after scaling
#define X_OUTPUT_SIZE_H 0x3808 //Bit[3:0]: DVP output horizontal width[11:8]
#define X_OUTPUT_SIZE_L 0x3809 //Bit[7:0]:
#define Y_OUTPUT_SIZE_H 0x380a //Bit[2:0]: DVP output vertical height[10:8]
#define Y_OUTPUT_SIZE_L 0x380b //Bit[7:0]:
#define X_TOTAL_SIZE_H 0x380c //Bit[3:0]: Total horizontal size[11:8]
#define X_TOTAL_SIZE_L 0x380d //Bit[7:0]:
#define Y_TOTAL_SIZE_H 0x380e //Bit[7:0]: Total vertical size[15:8]
#define Y_TOTAL_SIZE_L 0x380f //Bit[7:0]:
#define X_OFFSET_H 0x3810 //Bit[3:0]: ISP horizontal offset[11:8]
#define X_OFFSET_L 0x3811 //Bit[7:0]:
#define Y_OFFSET_H 0x3812 //Bit[2:0]: ISP vertical offset[10:8]
#define Y_OFFSET_L 0x3813 //Bit[7:0]:
#define X_INCREMENT 0x3814 //Bit[7:4]: Horizontal odd subsample increment
//Bit[3:0]: Horizontal even subsample increment
#define Y_INCREMENT 0x3815 //Bit[7:4]: Vertical odd subsample increment
//Bit[3:0]: Vertical even subsample increment
// Size before scaling
//#define X_INPUT_SIZE (X_ADDR_END - X_ADDR_ST + 1 - (2 * X_OFFSET))
//#define Y_INPUT_SIZE (Y_ADDR_END - Y_ADDR_ST + 1 - (2 * Y_OFFSET))
#define ISP_CONTROL_01 0x5001 // Bit[5]: Scale enable
// 0: Disable
// 1: Enable
#define SCALE_CTRL_1 0x5601 // Bit[6:4]: HDIV RW
// DCW scale times
// 000: DCW 1 time
// 001: DCW 2 times
// 010: DCW 4 times
// 100: DCW 8 times
// 101: DCW 16 times
// Others: DCW 16 times
// Bit[2:0]: VDIV RW
// DCW scale times
// 000: DCW 1 time
// 001: DCW 2 times
// 010: DCW 4 times
// 100: DCW 8 times
// 101: DCW 16 times
// Others: DCW 16 times
#define SCALE_CTRL_2 0x5602 // X_SCALE High Bits
#define SCALE_CTRL_3 0x5603 // X_SCALE Low Bits
#define SCALE_CTRL_4 0x5604 // Y_SCALE High Bits
#define SCALE_CTRL_5 0x5605 // Y_SCALE Low Bits
#define SCALE_CTRL_6 0x5606 // Bit[3:0]: V Offset
#define PCLK_RATIO 0x3824 // Bit[4:0]: PCLK ratio manual
#define VFIFO_CTRL0C 0x460C // Bit[1]: PCLK manual enable
// 0: Auto
// 1: Manual by PCLK_RATIO
#define VFIFO_X_SIZE_H 0x4602
#define VFIFO_X_SIZE_L 0x4603
#define VFIFO_Y_SIZE_H 0x4604
#define VFIFO_Y_SIZE_L 0x4605
#define SC_PLLS_CTRL0 0x303a // Bit[7]: PLLS bypass
#define SC_PLLS_CTRL1 0x303b // Bit[4:0]: PLLS multiplier
#define SC_PLLS_CTRL2 0x303c // Bit[6:4]: PLLS charge pump control
// Bit[3:0]: PLLS system divider
#define SC_PLLS_CTRL3 0x303d // Bit[5:4]: PLLS pre-divider
// 00: 1
// 01: 1.5
// 10: 2
// 11: 3
// Bit[2]: PLLS root-divider - 1
// Bit[1:0]: PLLS seld5
// 00: 1
// 01: 1
// 10: 2
// 11: 2.5
#define COMPRESSION_CTRL00 0x4400 //
#define COMPRESSION_CTRL01 0x4401 //
#define COMPRESSION_CTRL02 0x4402 //
#define COMPRESSION_CTRL03 0x4403 //
#define COMPRESSION_CTRL04 0x4404 //
#define COMPRESSION_CTRL05 0x4405 //
#define COMPRESSION_CTRL06 0x4406 //
#define COMPRESSION_CTRL07 0x4407 // Bit[5:0]: QS
#define COMPRESSION_ISI_CTRL 0x4408 //
#define COMPRESSION_CTRL09 0x4409 //
#define COMPRESSION_CTRL0a 0x440a //
#define COMPRESSION_CTRL0b 0x440b //
#define COMPRESSION_CTRL0c 0x440c //
#define COMPRESSION_CTRL0d 0x440d //
#define COMPRESSION_CTRL0E 0x440e //
/**
* @brief register value
*/
#define TEST_COLOR_BAR 0xC0 /* Enable Color Bar roling Test */
#define AEC_PK_MANUAL_AGC_MANUALEN 0x02 /* Enable AGC Manual enable */
#define AEC_PK_MANUAL_AEC_MANUALEN 0x01 /* Enable AEC Manual enable */
#define TIMING_TC_REG20_VFLIP 0x06 /* Vertical flip enable */
#define TIMING_TC_REG21_HMIRROR 0x06 /* Horizontal mirror enable */
#endif // __OV3660_REG_REGS_H__