oe7drt-website/content/posts/2024/packetradio-vara-mobilinkd-and-digirig-on-linux/index.md

---
title: Packet radio, VARA (FM+HF), Mobilinkd and Digirig on Linux
summary: >
  
date: 2024-02-13T22:05:30+01:00
lastmod: 2024-02-17T01:21:44+0000
categories:
- amateur-radio
- computerstuff
tags:
- draft_post

# showBreadcrumbs: true
# showDate: false
# showReadingTime: false
# showWordCount: false
# showPagination: false

# feed_exclude: true
# site_exclude: true

# some help
#
# highlighting with highlights
#
# use table, as inline creates a padding around
# and it pushes the text more to the right side (end of screen)
#
# ~~~html {linenos=table,hl_lines="3-6"}
# ~~~html {linenos=inline,hl_lines="1,3-6"}

draft: true

---

Out of curiosity I began another "research-session" because it is really time to get
that Winlink back on my Linux laptop (I used OpenBSD on this machine for some months now
and I haven't got a single chance to get wine onto that).

## Digirig

The Digirig gets controlled with `rigctld` -- I use different models for the
HF and the FM rig -- but the rig configuration is the same for both:

~~~json
  "hamlib_rigs": {
    "my_rig": {
      "address": "127.0.0.1:4532",
      "network": "tcp"
    }
  },
~~~

### Packet radio

Using <kbd>AX.25+agwpe</kbd> within pat in combination with Direwolf -- but
this combination felt a bit slow (which might only be my subjective opinion).

~~~json
  "ax25": {
    "engine": "linux",
    "rig": "",
    "beacon": {
      "every": 3600,
      "message": "Winlink P2P",
      "destination": "IDENT"
    }
  "agwpe": {
    "addr": "127.0.0.1:8000",
    "radio_port": 0
  },
~~~

The <kbd>agwpe</kbd> section is used by Direwolf:

~~~console {hl_lines="8"}
% direwolf -c /etc/direwolf/direwolf.conf -p
Dire Wolf version 1.7
Includes optional support for:  gpsd hamlib cm108-ptt dns-sd

Reading config file /etc/direwolf/direwolf.conf
Audio device for both receive and transmit: plughw:1,0  (channel 0)
Channel 0: 1200 baud, AFSK 1200 & 2200 Hz, A+, 44100 sample rate.
Ready to accept AGW client application 0 on port 8000 ...
Ready to accept KISS TCP client application 0 on port 8001 ...
DNS-SD: Avahi: Failed to create Avahi client: Daemon not running
Virtual KISS TNC is available on /dev/pts/8
Created symlink /tmp/kisstnc -> /dev/pts/8
~~~

The `direwolf.conf` file looks like this (comments removed):

~~~squid
ADEVICE  plughw:1,0
CHANNEL 0
MYCALL OE7DRT
MODEM 1200
PTT /dev/ttyUSB0 RTS DTR
AGWPORT 8000
KISSPORT 8001
IGTXLIMIT 6 10
~~~

Direwolf will warn you if the input audio level is way off; I adjust them
with the program `alsamixer` (<kbd>F6</kbd> to select the USB soundcard,
then <kbd>F5</kbd> to list all devices, disable _Auto Gain Control_ with <kbd>m</kbd>
(mute)).

### VARA FM

The corresponding configuratoin in the pat config file:

~~~json
  "varafm": {
    "addr": "127.0.0.1:8300",
    "bandwidth": 0,
    "rig": "my_rig",
    "ptt_ctrl": true
  },
~~~

Start `rigctld`:

~~~console
$ rigctld -m 1 -p /dev/ttyUSB0 -P RTS -s 9600 -vvvv
~~~

I start VARA FM by running a small script called `varafm.sh`:

~~~sh
#!/usr/bin/sh
# Start VARA via wine

WINEPREFIX=/home/dominic/.wine-winlink wine "C:\\VARA FM\\VARAFM.exe"
~~~

In VARA FM set the USB soundcard, adjust the volume in `alsamixer` and on your
radio, set <kbd>PTT</kbd> to <kbd>VOX</kbd> -- I tried to use <kbd>COM1</kbd> but
that crashed wine several times (that is why we setup _rigctl_ before).

If you need to stop rigctl: you can usually do that with
<kbd>CTRL</kbd> + <kbd>C</kbd> but this might not work. So either stop the running
pat process by hitting <kbd>CTRL</kbd> + <kbd>C</kbd> in the "pat terminal" or by
killing rigctld with `kill $(pgrep rigctld)`.

This is not tested yet, because VARA crashed when I was out in the field and I cannot
reach a gateway at home where I researched/tested the final settings.

### VARA HF

Back to the TX-500, the pat configuration looks like:

~~~json
  "varahf": {
    "addr": "127.0.0.1:8300",
    "bandwidth": 2300,
    "rig": "my_rig",
    "ptt_ctrl": true
  },
~~~

I start rigctld like:

~~~console
$ rigctld -m 2014 -r /dev/ttyUSB0 -d /dev/ttyUSB0 -p /dev/ttyUSB0 \
  -P RTS -s 9600 -vvvv
~~~

Untested, untested...


## Mobilinkd

I will use <kbd>AX.25+linux</kbd> in pat with the TNC4 paired via Bluetooth.

First of all, power on the TNC4 and pair it -- I use _blueman-manager_ for this.

Then we need the serial port -- right click on <kbd>TNC4 Mobilinkd</kbd> and select
_Connect with_ <kbd>Serial port</kbd>

That will create a serial port at `/dev/rfcomm0`.

In order to use it in pat, we need to use `kissattach` on that serial device.

First we need to setup an AX.25 port called <kbd>wl2k</kbd> in `/etc/ax25/axports`:

~~~squid
# /etc/ax25/axports
#
# The format of this file is:
#
# name callsign speed paclen window description
#

#1	OH2BNS-1	1200	255	2	144.675 MHz (1200  bps)
#2	OH2BNS-9	38400	255	7	TNOS/Linux  (38400 bps)
wl2k  OE7DRT  1200  255 7 Winlink
~~~

This needs also some configuration work in the pat configuration:

~~~json
  "ax25_linux": {
    "port": "wl2k"
  },
  "serial-tnc": {
    "path": "/dev/rfcomm0",
    "serial_baud": 9600,
    "hbaud": 1200,
    "type": "Kenwood",
    "rig": ""
  },
~~~

Now we can attach a KISS interface to the serial port:

~~~console
$ sudo kissattach /dev/rfcomm0 wl2k
AX.25 port wl2k bound to device ax0
~~~

Select your PacketRadio Gateway (CALLSIGN-10 usually) and connect using
<kbd>AX.25+linux</kbd>.

To de-attach the KISS interface we need to kill the process by:

~~~console
$ sudo kill $(pgrep kissattach)
~~~

## Some systemd unit-file examples

Put them into `$HOME/.config/systemd/user`.

### pat

~~~systemd
[Unit]
Description="pat winlink"
After=network.target rigctld.service ardopc.service
Wants=rigctld.service ardopc.service

[Service]
Type=simple
ExecStart=/home/dominic/bin/pat --listen "ardop,telnet" http
TimeoutSec=10

[Install]
WantedBy=default.target
~~~

### rigctld

~~~systemd
[Unit]
Description="rigctld for TX-500 using Digirig"
After=network.target
Before=pat.service ardopc.service

[Service]
Type=simple
; -m 2005 for Lab500 TX-500 CAT protocol
; ExecStart=/usr/bin/rigctld -m 2050 -r /dev/ttyUSB0 -p /dev/ttyUSB0 -P RTS -s 9600 -vvvv
; -m 2014 for Kenwood TS-2000 CAT protocol
; ExecStart=/usr/bin/rigctld -m 2014 -r /dev/ttyUSB0 -p /dev/ttyUSB0 -P RTS -s 9600 -vvvv
ExecStart=/usr/bin/rigctld -m 2014 -r /dev/ttyUSB0 -d /dev/ttyUSB0 -p /dev/ttyUSB0 -P RTS -s 9600 -vvvv
TimeoutSec=10

[Install]
WantedBy=default.target
~~~

You can change the used protocol (_Kenwood TS-200_ or _Lab599 TX-500_l for CAT control within
the menu on the TX-500 (last menu setting)).

### ardopc

~~~systemd
[Unit]
Description="ardopc for TX-500 using Digirig"
After=network.target
Before=pat.service

[Service]
Type=simple
; ExecStart=/home/dominic/bin/ardopc 8515 hw:1,0 hw:1,0 -c /dev/ttyUSB0:9600 -p /dev/ttyUSB0:9600
ExecStart=/home/dominic/bin/ardopc 8515 plughw:1,0 plughw:1,0
TimeoutSec=10

[Install]
WantedBy=default.target
~~~