re-arrange FT-3D page (had two headers about transmit power)

content/equipment/handhelds/yaesu-ft3d/index.md

@@ -1,19 +1,15 @@
 ---
 title: Yaesu FT-3D
 date: 2020-05-24
-lastmod: 2024-03-10T14:28:27+0000
-#categories:
-#- amateur-radio
-showBreadcrumbs: true
+lastmod: 2024-03-17T19:20:22+0000
 
-# showDate: false
+showBreadcrumbs: true
 showReadingTime: false
 showWordCount: false
-# showPagination: false
 
 ---
 
-C4FM as one of the easiest digital operating mode to set up. Enter your
+C4FM is one of the easiest digital operating mode to set up. Enter your
 callsign and you're good to go.
 
 ![FT3D](ft-3d.jpg)
@@ -58,6 +54,17 @@ the brightness at all, but YMMV.
 The FT-3D supports 4 power levels: LOW1 (0.3W), LOW2 (1W), LOW3 (2.5W) and
 HIGH (5W).
 
+| Power output on 2m and 70cm | |
+| ---- | --- |
+| ![2m power output](power-2m.png "power output around 145.500 MHz") | ![70cm power output](power-70cm.png "power output around 433.500 MHz") |
+
+| Power setting | Output 2m | Output 70cm |
+| :--- | :----- | :----- |
+| LOW1 | 350 mW | 340 mW |
+| LOW2 | 1.00 W | 972 mW |
+| LOW3 | 2.80 W | 2.44 W |
+| HIGH | 5.66 W | 4.87 W |
+
 ## Band scope
 
 This is probably the first portable radio that I bought which had a band scope.
@@ -98,16 +105,3 @@ Although the recordings are sometimes quite buggy, I really appreciate this
 function on newer radios. No need to pull out your smartphone to get a recording
 on tape.
 
-## Power output
-
-| Power output on 2m and 70cm | |
-| ---- | --- |
-| ![2m power output](power-2m.png "power output around 145.500 MHz") | ![70cm power output](power-70cm.png "power output around 433.500 MHz") |
-
-| Power setting | Output 2m | Output 70cm |
-| :--- | :----- | :----- |
-| LOW1 | 350 mW | 340 mW |
-| LOW2 | 1.00 W | 972 mW |
-| LOW3 | 2.80 W | 2.44 W |
-| HIGH | 5.66 W | 4.87 W |
-