publish raspberry pi notes and new post about smart tvs mic

also cleanup some draft posts

content/notes/raspberry-pi/index.md

@@ -1,6 +1,6 @@
 ---
 title: Raspberry Pi
-date: 2023-11-25T09:14:35+01:00
+date: 2024-01-27T11:01:31+0000
 #lastmod: 
 
 #showDate: false
@@ -13,8 +13,6 @@ showBreadcrumbs: true
 feed_exclude: true
 # site_exclude: true
 
-draft: true
-
 ---
 
 ## Raspberry Pi 4
@@ -108,8 +106,71 @@ We could also create virtual environments per application, module, package etc.
 
 ## Raspberry Pi 3
 
+### UPS Plus
+
+An **uninterruptible power supply** (UPS) is very useful if you have your own servers at
+home. I've been using one with my old DiskStation (NAS[^1]) but I got rid of the DiskStation
+at the end of 2023. I got the UPS Plus for the Raspberry Pi now for a while but never tested
+all its features yet (well, I haven't used it much to be honest).
+
+Though, I have some quick notes to remember:
+
+Some software is needed to get status information about the batteries (which are of type 18650).
+
+~~~console
+$ python3 -m venv .
+$ curl -LsO https://raw.githubusercontent.com/geeekpi/upsplus/main/install.sh
+$ bash install.sh
+~~~
+
+Any errors can be resolved by installing by hand. In my notes I thought that info is enough, so
+here we are :wink:
+
+We may have to edit our crontab:
+
+~~~cron
+* * * * * /home/dr/bin/python3 /home/dr/bin/upsPlus.py > /tmp/upsPlus.log
+* * * * * /home/dr/bin/python3 /home/dr/bin/upsPlus_iot.py > /tmp/upsPlus_iot.log
+~~~
+
+Getting information:
+
+~~~console
+$ python3 bin/upsPlus.py
+------------------------------------------------------------
+------Current information of the detected Raspberry Pi------
+------------------------------------------------------------
+Raspberry Pi Supply Voltage: 5.028 V
+Raspberry Pi Current Current Consumption: 571.068 mA
+Raspberry Pi Current Power Consumption: 2570.227 mW
+------------------------------------------------------------
+-------------------Batteries information-------------------
+------------------------------------------------------------
+Voltage of Batteries: 4.208 V
+Battery Current (Charging) Rate: 30.000 mA
+Current Battery Power Supplement: 263.415 mW
+Successfully set the protection voltage to: 3700 mV
+------------------------------------------------------------
+Currently charging via Type C Port.
+~~~
+
+The Raspberry Pi will continue to work if you remove the power cable.
+
+[^1]: [Network Attached Storage](https://en.wikipedia.org/wiki/Network-attached_storage)
+
 ## Raspberry Pi 2
 
+### WiFi adapter
+
+The Raspberry Pi 2 does not have any WiFi capabilities so an adapter
+is needed to make use of your local WiFi network. I found [this small
+adapter](https://www.amazon.de/gp/product/B003MTTJOY/) and can confirm
+it as a working unit.
+
+![picture of the small Edimax EW-7811UN wireless adapter](edimax_wifi.jpg "It is not available
+on Amazon any more, but they suggest another device as its successor. I can only speak for the
+one that I own: **Edimax EW-7811Un**")
+
 ## Raspberry Pi Pico W
 
 ### Using MicroPython

content/posts/2024/61-smart-tvs-are-not-great/index.md

@@ -5,33 +5,12 @@ summary: >
   came to the same conclusion: smart TVs may spy on us (like our smartphones do).
   The thumbnail on the side shows the actual microphone that is soldered onto the
   main circuit board of my remote control; it is no longer than 4 mm.
-date: 2024-01-21T19:26:58+01:00
-lastmod: 2024-01-27T09:51:07+0000
+date: 2024-01-27T10:58:06+0000
+# lastmod: 
 categories:
-- computerstuff
+  - computerstuff
 tags:
-- draft_post
-
-# showBreadcrumbs: true
-# showDate: false
-# showReadingTime: false
-# showWordCount: false
-# showPagination: false
-
-# feed_exclude: true
-# site_exclude: true
-
-# some help
-#
-# highlighting with highlights
-#
-# use table, as inline creates a padding around
-# and it pushes the text more to the right side (end of screen)
-#
-# ~~~html {linenos=table,hl_lines="3-6"}
-# ~~~html {linenos=inline,hl_lines="1,3-6"}
-
-draft: true
+  - privacy
 
 ---
 
@@ -50,13 +29,18 @@ these devices could also spy on your conversations -- but the possibility is the
 I never use the voice command function of my smart TV I decided to remove the mic.
 
 ![close up pic of the hole in the remote control](remote.jpg "The hole for the mic on my remote
-control is located at the top.") 
+control is located at the top") 
 
 The mic is usually located very easily, though the elements below the hole are very, very small.
 I used a sharp cutting knife and a sharp side cutter to remove the tiny circuit board.
 
 ![a picture of the circuit board and the shielding](mini-mic.jpg "There is a very small hole in the shielding that surrounds the small
-components on the \"microphone circuit board\"") 
+components on the \"microphone circuit board\"")
 
-![for reference: same as before, but with the head of a match beside - they are like the same size](reference.jpg "For reference") 
+![picture of the cutter: a sharp triangle kind of blade](cutter.jpg "These are often used on electronics workbenches to cut all sorts of things")
+
+The microphone circuit board was connected on four points which I cut with this cutter slowly and
+precise.
+
+![for reference: same as before, but with the head of a match beside - they are like the same size](reference.jpg "A reference picture so you get a clue how small this circuit board actually is") 
 

content/posts/2024/pat-winlink-on-openbsd/index.md

@@ -1,26 +0,0 @@
----
-title: Pat winlink on OpenBSD
-summary: Trying out [pat](https://getpat.io) on my OpenBSD laptop.
-date: 2023-11-12T14:18:57+01:00
-#lastmod: 
-categories:
-- amateur-radio
-tags:
-- winlink
-- openbsd
-- draft_post
-
-# showBreadcrumbs: true
-# showDate: false
-# showReadingTime: false
-# showWordCount: false
-# showPagination: false
-
-# feed_exclude: true
-# site_exclude: true
-
-draft: true
-
----
-
-

content/posts/2024/ups-plus-on-the-raspberry-pi-3/index.md

@@ -1,65 +0,0 @@
----
-title: UPS Plus on the Raspberry Pi 3
-summary: >
-  I recently bought a UPS head for my Raspberry Pi 3 that makes
-  use of my akkus of the type 18650.
-date: 2023-11-25T06:46:12+01:00
-#lastmod: 
-categories:
-- amateur-radio
-tags:
-- draft_post
-
-# showBreadcrumbs: true
-# showDate: false
-# showReadingTime: false
-# showWordCount: false
-# showPagination: false
-
-# feed_exclude: true
-# site_exclude: true
-
-draft: true
-
----
-
-in home dir
-
-```console
-$ python3 -m venv .
-$ curl -LsO https://raw.githubusercontent.com/geeekpi/upsplus/main/install.sh
-$ bash install.sh
-```
-
-if errors occur, install by hand
-
-edit crontab to use the python version in your bin folder
-
-```crontab
-* * * * * /home/dr/bin/python3 /home/dr/bin/upsPlus.py > /tmp/upsPlus.log
-* * * * * /home/dr/bin/python3 /home/dr/bin/upsPlus_iot.py > /tmp/upsPlus_iot.log
-```
-
-get information
-
-```console
-$ python3 bin/upsPlus.py
-------------------------------------------------------------
-------Current information of the detected Raspberry Pi------
-------------------------------------------------------------
-Raspberry Pi Supply Voltage: 5.028 V
-Raspberry Pi Current Current Consumption: 571.068 mA
-Raspberry Pi Current Power Consumption: 2570.227 mW
-------------------------------------------------------------
--------------------Batteries information-------------------
-------------------------------------------------------------
-Voltage of Batteries: 4.208 V
-Battery Current (Charging) Rate: 30.000 mA
-Current Battery Power Supplement: 263.415 mW
-Successfully set the protection voltage to: 3700 mV
-------------------------------------------------------------
-Currently charging via Type C Port.
-```
-
-The raspi works when power cable get pulled out.
-