diff --git a/config/_default/config.toml b/config/_default/config.toml index 72d1291..cf0e36b 100644 --- a/config/_default/config.toml +++ b/config/_default/config.toml @@ -16,5 +16,17 @@ summaryLength = 0 # # categories = "/:section/:slug/" # categories = "/:slug/" +#[outputs] +# home = ["HTML", "RSS", "JSON"] + +[mediaTypes] +[mediaTypes."application/atom"] +suffixes = ["xml"] + +[outputFormats.Atom] +mediaType = "application/atom" +baseName = "index" +isPlainText = false + [outputs] - home = ["HTML", "RSS", "JSON"] +home = [ "HTML", "Atom", "JSON" ] diff --git a/config/_default/languages.en.toml b/config/_default/languages.en.toml index 0d0fa4d..8bfcf98 100644 --- a/config/_default/languages.en.toml +++ b/config/_default/languages.en.toml @@ -8,14 +8,13 @@ rtl = false title = "OE7DRT" # logo = "img/logo.jpg" # description = "My awesome website" -# copyright = "Copy, _right?_ :thinking_face:" -copyright = """Content © by Dominic “OE7DRT”. -Licensed as [CC BY-NC-ND 4.0](https://creativecommons.org/licenses/by-nc-nd/4.0/)""" +#copyright = "Copy, _right?_ :thinking_face:" +copyright = "Copyright by Dominic Reich “OE7DRT”." dateFormat = "2 January 2006" [author] - name = "Dominic “OE7DRT”" + name = "Dominic Reich “OE7DRT”" image = "img/author.jpg" headline = "Austrian Amateur Radio Station" bio = """Quick’n’dirty facts: mid-30s, construction worker since 2016, diff --git a/config/_default/menus.en.toml b/config/_default/menus.en.toml index 87a179f..676adf3 100644 --- a/config/_default/menus.en.toml +++ b/config/_default/menus.en.toml @@ -35,8 +35,6 @@ pageRef = "tags" weight = 50 - - # -- Footer Menu -- # The footer menu is displayed at the bottom of the page, just before # the copyright notice. Configure as per the main menu above. @@ -60,3 +58,8 @@ name = "Links" pageRef = "links" weight = 20 + +[[footer]] + name = "LICENSE" + pageRef = "license" + weight = 30 diff --git a/config/_default/params.toml b/config/_default/params.toml index 24cdc74..5400d42 100644 --- a/config/_default/params.toml +++ b/config/_default/params.toml @@ -7,7 +7,7 @@ colorScheme = "congo" defaultAppearance = "dark" # valid options: light or dark -autoSwitchAppearance = true +autoSwitchAppearance = false enableSearch = true enableCodeCopy = true @@ -15,6 +15,8 @@ enableCodeCopy = true # mainSections = ["section1", "section2"] # robots = "" +#rssFullContent = true + [header] layout = "hybrid" # valid options: basic, hamburger, hybrid, custom # logo = "img/logo.jpg" @@ -23,7 +25,7 @@ enableCodeCopy = true [footer] showCopyright = true showThemeAttribution = true - showAppearanceSwitcher = false + showAppearanceSwitcher = true showScrollToTop = true [homepage] @@ -60,6 +62,9 @@ enableCodeCopy = true [sitemap] excludedKinds = ["taxonomy", "term"] + changefreq = "weekly" + priority = 0.5 + filename = "sitemap.xml" [taxonomy] showTermCount = true diff --git a/content/_index.md b/content/_index.md index dd426da..f99ef89 100644 --- a/content/_index.md +++ b/content/_index.md @@ -1,12 +1,5 @@ ---- -title: "Welcome to my personal website! :tada:" -description: "This is a demo of the Congo theme for Hugo." ---- ++++ +title = "OE7DRT" +description = "my personal website" -{{< lead >}} -amateur radio station OE7DRT, dominic -{{< /lead >}} - -welcome all! - -good to be herea gain... ++++ diff --git a/content/about/index.md b/content/about/index.md index bb99e4d..4f1ebbd 100644 --- a/content/about/index.md +++ b/content/about/index.md @@ -6,6 +6,8 @@ comment = false showReadingTime = false showWordCount = false +feed_exclude = true + +++ Hello, my name is **Dominic** and I maintain this website. diff --git a/content/equipment/_index.md b/content/equipment/_index.md index 9be29ad..8e92f5d 100644 --- a/content/equipment/_index.md +++ b/content/equipment/_index.md @@ -6,4 +6,6 @@ showDateUpdated = false showReadingTime = false showWordCount = false +feed_exclude = true + +++ diff --git a/content/equipment/accessories/_index.md b/content/equipment/accessories/_index.md index 8cae38e..791bd39 100644 --- a/content/equipment/accessories/_index.md +++ b/content/equipment/accessories/_index.md @@ -1,7 +1,9 @@ +++ title = "Accessories" -summary = """like tuners, bags, masts, coax cables etc...""" -date = 2019-11-01 +# summary = """like tuners, bags, masts, coax cables etc...""" +summary = """Additional equipment like antenna tuners, bags, masts, coax +cables...""" +#date = 2019-11-01 tags = ["accessory", "portable", "tuner"] showDate = false @@ -11,8 +13,7 @@ showBreadcrumbs = true showPagination = false showWordCount = false +feed_exclude = true weight = 40 +++ - -test \ No newline at end of file diff --git a/content/equipment/antennas/_index.md b/content/equipment/antennas/_index.md index d2d11e2..1586386 100644 --- a/content/equipment/antennas/_index.md +++ b/content/equipment/antennas/_index.md @@ -1,7 +1,8 @@ +++ title = "Antennas" -summary = """Antenna""" -date = 2019-11-01 +summary = """I have no idea what antenna you should use. These are the +antennas that I use (or used).""" +#date = 2019-11-01 tags = ["antenna", "portable", "chameleon", "sotabeams", "", "",] showDate = false showDateUpdated = false @@ -10,8 +11,7 @@ showBreadcrumbs = true showPagination = false showWordCount = false +feed_exclude = true weight = 30 +++ - -test \ No newline at end of file diff --git a/content/equipment/handhelds/_index.md b/content/equipment/handhelds/_index.md index dabd18b..31bcc69 100644 --- a/content/equipment/handhelds/_index.md +++ b/content/equipment/handhelds/_index.md @@ -1,7 +1,8 @@ +++ title = "Handhelds" -summary = """Handheld radios""" -date = 2019-11-01 +summary = """The ultra-lightweight transceivers. Mostly for 2m and/or 70cm. +Some are digital-ready.""" +#date = 2019-11-01 tags = ["handheld", "portable", "icom", "yaesu", "radioddity", "wouxon", "anytone", "hytera"] showDate = false @@ -11,8 +12,7 @@ showBreadcrumbs = true showPagination = false showWordCount = false +feed_exclude = true weight = 20 +++ - -test \ No newline at end of file diff --git a/content/equipment/handhelds/radioddity-gd77/index.md b/content/equipment/handhelds/radioddity-gd77/index.md index 989379c..f012922 100644 --- a/content/equipment/handhelds/radioddity-gd77/index.md +++ b/content/equipment/handhelds/radioddity-gd77/index.md @@ -4,16 +4,18 @@ summary: > Consider the OpenGD77 firmware and you're all set with a very user friendly and customizable handheld radio. date: 2020-10-22T23:19:14+02:00 +lastmod: 2022-11-25T21:33:02+01:00 showBreadcrumbs: true showReadingTime: false showWordCount: false --- -[Product page][1] — [OpenGD77 website][2] +[Product page][1] — [OpenGD77 Firmware][2] — [Latest CPS][3] [1]: https://www.radioddity.com/products/radioddity-gd-77-dmr-two-way-radio -[2]: https://www.opengd77.com/downloads/ +[2]: https://www.opengd77.com/downloads/releases/ +[3]: https://www.opengd77.com/downloads/CPS/Latest/ This is probably the first DMR capable radio that is made for amateur radio. Obviosly not per default, but thanks to OpenGD77 it is now suited for amateur @@ -88,9 +90,9 @@ these regions: `232, 262, 263, 264, 222, 228`. Or: download your own set of DMR-IDs with the regions you want. You can also download only some federal states (like `2327,2328`) if you don't want all -entries from `232`. [Read along here][3] for some instructions about this. +entries from `232`. [Read along here][dmrid] for some instructions about this. -[3]: {{< ref 2020-11-16-create-your-own-dmrid-database-file >}} +[dmrid]: {{< ref 2020-11-16-create-your-own-dmrid-database-file >}} ## Band scope (Spectrum sweep scan) diff --git a/content/equipment/software/_index.md b/content/equipment/software/_index.md index 284b9ae..58016c8 100644 --- a/content/equipment/software/_index.md +++ b/content/equipment/software/_index.md @@ -1,7 +1,7 @@ +++ title = "Software" -summary = """Software I use or tested""" -date = 2019-11-01 +summary = """Software I use or tested.""" +#date = 2019-11-01 tags = ["software", "cqrlog", "n1mm", "log4om", "qlog", "klog"] showDate = false showDateUpdated = false @@ -10,8 +10,7 @@ showBreadcrumbs = true showPagination = false showWordCount = false +feed_exclude = true weight = 50 +++ - -test \ No newline at end of file diff --git a/content/equipment/transceivers/_index.md b/content/equipment/transceivers/_index.md index ccf14e4..050a37c 100644 --- a/content/equipment/transceivers/_index.md +++ b/content/equipment/transceivers/_index.md @@ -1,7 +1,7 @@ +++ title = "Transceivers" -summary = """trans ceivers""" -date = 2022-11-16T22:19:11+01:00 +summary = """The big ones. May include QRP transceivers.""" +#date = 2022-11-16T22:19:11+01:00 tags = ["transceiver", "portable", "icom", "yaesu", "lab599"] showDate = false @@ -11,6 +11,7 @@ showBreadcrumbs = true showPagination = false showWordCount = false +feed_exclude = true weight = 10 -+++ \ No newline at end of file ++++ diff --git a/content/equipment/transceivers/icom-ic7300/index.md b/content/equipment/transceivers/icom-ic7300/index.md index 9025cb0..8d08f29 100644 --- a/content/equipment/transceivers/icom-ic7300/index.md +++ b/content/equipment/transceivers/icom-ic7300/index.md @@ -5,24 +5,26 @@ showBreadcrumbs: true --- -The first shortwave transceiver that I bought. I got told this has one of the best -receivers and filter techniques on the beginner segment. Unfortunately this -radio is a bit chunky and heavy to transport in a rucksack so I haven't really -used it that much so far---I do not have a station set up at my QTH yet. +The first shortwave transceiver that I bought. I got told this has +one of the best receivers and filter techniques on the beginner segment. +Unfortunately this radio is a bit chunky and heavy to transport in a +rucksack so I haven't really used it that much so far---I do not have +a station set up at my QTH yet. ## Built-in soundcard and CAT control -The radio can be connected to a computer with one single USB cable which -provides a virtual soundcard aswell as a CAT control interface. This makes -operating digital modes dead easy. +The radio can be connected to a computer with one single USB cable +which provides a virtual soundcard aswell as a CAT control interface. +This makes operating digital modes dead easy. ## Big touch screen -Maybe the first thing that you might see on that radio is the big screen. It is -clear and very easy to read; you can interact with your finger aswell. +Maybe the first thing that you might see on that radio is the big +screen. It is clear and very easy to read; you can interact with your +finger aswell. ## Twin filters -To separate a signal is also a very easy thing to do. Use the twin filters to -narrow down the used bandwith. Long press the filter button to clear and reset -those filters. +To separate a signal is also a very easy thing to do. Use the twin +filters to narrow down the used bandwith. Long press the filter +button to clear and reset those filters. diff --git a/content/equipment/transceivers/lab599-tx500/index.md b/content/equipment/transceivers/lab599-tx500/index.md new file mode 100644 index 0000000..9e21452 --- /dev/null +++ b/content/equipment/transceivers/lab599-tx500/index.md @@ -0,0 +1,10 @@ +--- +title: Lab599 Discovery TX-500 +date: 2022-11-04 15:13:43 +#lastmod: 2022-11-12T19:51:31+01:00 +showBreadcrumbs: true +# showReadingTime: false +# showWordCount: false + +--- + diff --git a/content/equipment/transceivers/yaesu-fd891/index.md b/content/equipment/transceivers/yaesu-fd891/index.md index fafe98b..0b03af9 100644 --- a/content/equipment/transceivers/yaesu-fd891/index.md +++ b/content/equipment/transceivers/yaesu-fd891/index.md @@ -8,59 +8,63 @@ showBreadcrumbs: true --- -I got this because the IC-7300 was too chunky to be effectively transported -within a rucksack. Also I feared scratches in its big display or even a broken -display: so here is the Yaesu FT-891. +I got this because the IC-7300 was too chunky to be effectively +transported within a rucksack. Also I feared scratches in its big +display or even a broken display: so here is the Yaesu FT-891. -I bought the 891 back in 2020, so this is not usable on 60 meters (like the -IC-7300). +I bought the 891 back in 2020, so this is not usable on 60 meters +(like the IC-7300). ## Excellent receiver -I think this radio is quite similar to the IC-7300 in its receiving quality. -Lots of options in the function menues help you to concentrate on the actual -voice you receive. +I think this radio is quite similar to the IC-7300 in its receiving +quality. Lots of options in the function menues help you to concentrate +on the actual voice you receive. ## Good filter capabilities -The filters are good enough to filter for a specific signal, mainly using -_WIDTH_ and _SHIFT_ and sometimes _CONTOUR_ filters is mostly effective -enough. The _DNR_ is also quite -nice and works well, although I don't like the resulting voice that much. Way -better works the autonotch filter (_DNF_), -which is an awesome feature to have. +The filters are good enough to filter for a specific signal, mainly +using _WIDTH_ and _SHIFT_ and sometimes _CONTOUR_ filters is mostly +effective enough. The _DNR_ +is also quite nice and works well, although I don't like the resulting +voice that much. Way better works the autonotch filter +(_DNF_), which is an awesome +feature to have. ## Record and transmit CQ calls -The FT-891 lets you record up to 5(??) or 3? different clips that you can later -transmit by a button press. That might come in handy when you are contesting--- -can't refer to this much because I'm not contesting nor do I use this function -so far. +The FT-891 lets you record up to 5(??) or 3? different clips that you +can later transmit by a button press. That might come in handy when +you are contesting---can't refer to this much because I'm not +contesting nor do I use this function so far. ## Good size -I like it's size when it's beeing still a 100 W transceiver. Nonetheless it -drains the battery with 1 A when listening. +I like it's size when it's beeing still a 100 W transceiver. +Nonetheless it drains the battery with 1 A when listening. ## Digital modes -I use the radio with a SignalinkUSB interface and I have to extend the bandwith -manually with the _WIDTH_ setting from the function menue to have this set -correctly. The setting from the main settings is **not applied** on digital -modes. _Apparently Yaesu doesn't care about that bug._ +I use the radio with a SignalinkUSB interface and I have to extend +the bandwith manually with the _WIDTH_ setting from the function +menue to have this set correctly. The setting from the main settings +is **not applied** on digital modes. +_Apparently Yaesu doesn't care about that bug._ ## Tactical carrying system: 891escort ™ -Made from aluminium the [891escort](https://portablezero.com/yaesu857D.html) -adds a little weight but also protection to the radio, especially for the knobs -on the front panel. The addidional strap mounts can be used to attach a sling -to the radio, it could be easily carried now---not that I used that once, but -it is there as a feature. My focus was the additional protection when I bought -them. Now, a year later, I carry the radio inside a cloth bag without the escort -just to save some more grams when hiking through the mountains and I can remove -the detachable head of the unit to change different microphones/headsets. When -using the carrying system I would need to remove the right frame before I could -detach the units head. - -Some people recommend using a short LAN cable to get the socket outside, but I -haven't found a good one yet (and a short one). +Made from aluminium the +[891escort](https://portablezero.com/yaesu857D.html) +adds a little weight but also protection to the radio, especially +for the knobs on the front panel. The addidional strap mounts can be +used to attach a sling to the radio, it could be easily carried now--- +not that I used that once, but it is there as a feature. My focus was +the additional protection when I bought them. Now, a year later, I +carry the radio inside a cloth bag without the escort just to save +some more grams when hiking through the mountains and I can remove +the detachable head of the unit to change different microphones/headsets. +When using the carrying system I would need to remove the right frame +before I could detach the units head. + +Some people recommend using a short LAN cable to get the socket +outside, but I haven't found a good one yet (and a short one). diff --git a/content/license/index.md b/content/license/index.md new file mode 100644 index 0000000..3942b2f --- /dev/null +++ b/content/license/index.md @@ -0,0 +1,10 @@ ++++ +title = "LICENSE" +date = "2022-12-04T18:15:03+01:00" + +feed_exclude = true +draft = true + ++++ + +Licensed as [CC BY-NC-ND 4.0](https://creativecommons.org/licenses/by-nc-nd/4.0/). \ No newline at end of file diff --git a/content/links/index.md b/content/links/index.md index e579924..95c5be9 100644 --- a/content/links/index.md +++ b/content/links/index.md @@ -8,6 +8,8 @@ date = "2022-11-20T15:56:36+01:00" showReadingTime = false showWordCount = false +feed_exclude = true + +++ cool links here diff --git a/content/posts/2020-02-04-get-dmrids-on-the-command-line/index.md b/content/posts/2020-02-04-get-dmrids-on-the-command-line/index.md index d37251d..0c95ad5 100644 --- a/content/posts/2020-02-04-get-dmrids-on-the-command-line/index.md +++ b/content/posts/2020-02-04-get-dmrids-on-the-command-line/index.md @@ -103,7 +103,7 @@ else fi ~~~ -{{< alert note >}} +{{< alert circle-info >}} If someone has two DMRIDS, the most recent registered callsign will appear on the top. Feel free to modify the script to your needs if you also want to display the date of registration. Or modify the url if you want to only display last @@ -183,7 +183,7 @@ $ for i in oe7d{a..z}{a..z}; do call $i; done And this ran for 3 minutes and 17 seconds on my computer. -{{< alert note >}} +{{< alert circle-info >}} The output above was made with an older version of the script. The output now contains also the registration date as seen in previous examples. {{< /alert >}} diff --git a/content/posts/2020-02-16-nextion-dmr-last-heard-dashboard/index.md b/content/posts/2020-02-16-nextion-dmr-last-heard-dashboard/index.md index 2708dd6..37a2ea8 100644 --- a/content/posts/2020-02-16-nextion-dmr-last-heard-dashboard/index.md +++ b/content/posts/2020-02-16-nextion-dmr-last-heard-dashboard/index.md @@ -1,5 +1,5 @@ --- -title: My Nextion 2.4\" DMR Last Heard Dashboard +title: My Nextion 2.4" DMR Last Heard Dashboard summary: > I created a simple last-heard-dashboard for my small Nextion screen. It currently shows the used slot, its origin (like Network or RF) , the diff --git a/content/posts/2020-03-28-my-7inch-dmr-dashboard/index.md b/content/posts/2020-03-28-my-7inch-dmr-dashboard/index.md index fed7f6d..a225d43 100644 --- a/content/posts/2020-03-28-my-7inch-dmr-dashboard/index.md +++ b/content/posts/2020-03-28-my-7inch-dmr-dashboard/index.md @@ -34,7 +34,7 @@ the buttons. Read more about the system screen on the chapter {{< figure src="nxt07_01.png" alt="Screen Debug Preview" caption="" >}} -{{< alert warning >}} +{{< alert >}} You will need NextionDriver installed to use **all the buttons** on the SYSTEM page. {{< /alert >}} @@ -43,7 +43,8 @@ SYSTEM page. runs as root user.~~ Otherwise you should download the HMI files and modify it in your NextionEditor LTS. -{{< alert note "Update on March 31, 2020" >}} +{{< alert circle-info >}} +**Update on March 31, 2020** The screen works fine on Pi-Star v4, but without NextionDrivers you won't be able to use the start/stop buttons on the system page. In fact, you won't be able to use any buttons that execute code on the linux box. Also the version and diff --git a/content/posts/2020-11-15-operating-the-z-shell/index.md b/content/posts/2020-11-15-operating-the-z-shell/index.md index 6ab15e0..7e49988 100644 --- a/content/posts/2020-11-15-operating-the-z-shell/index.md +++ b/content/posts/2020-11-15-operating-the-z-shell/index.md @@ -10,11 +10,11 @@ This article is a summary of [reasoniamhere.com/.../outrageously-useful-tips-to-master-your-z-shell/][1]. The original article is from 2014 and the pages last entry is from 2015. In case the website goes down I want the important bits saved for my reading and learning -pleasure ;-) +pleasure :wink: -{{< alert note >}} +{{< alert circle-info >}} *None of the following commands on this page are my own.* {{< /alert >}} diff --git a/content/posts/2020-11-16-create-your-own-dmrid-database-file/index.md b/content/posts/2020-11-16-create-your-own-dmrid-database-file/index.md index fa3489d..33c630b 100644 --- a/content/posts/2020-11-16-create-your-own-dmrid-database-file/index.md +++ b/content/posts/2020-11-16-create-your-own-dmrid-database-file/index.md @@ -12,7 +12,8 @@ date: 2020-11-16T23:23:51+01:00 Let's start with the website [ham-digital.org](https://ham-digital.org/). It contains the user database of registered DMR-IDs worldwide. -{{< alert note "Update" >}} +{{< alert circle-info >}} +**Update** While these scripts still work, the website `ham-digital.org` is dead and the european database has been put together on [radioid.net](https://radioid.net). {{< /alert >}} @@ -24,16 +25,18 @@ registrations or the list of local administrators.~~ [reg]: https://register.ham-digital.org/ Okay, I try to keep this simple. These scripts are made to download an actual -snapshot of the DMR-ID database from *ham-digital.org*. They create a comma-separated -list of DMR-IDs and callsigns to import into an amateur radio device. Actually -I use them only on my [Radioddity GD-77]({{< ref "equipment" >}}). +snapshot of the DMR-ID database from *ham-digital.org*. They create a +comma-separated list of DMR-IDs and callsigns to import into an amateur radio +device. Actually I use them only on my +[Radioddity GD-77]({{< ref "equipment/handhelds/radioddity-gd77" >}}). + -`ref "equipment/handheld/radioddity-gd77" ` ## Download the full database That fetches the whole database, which are something around 180.000 entries at -the moment (2020-Nov-15). The script uses about 8MB of RAM. Something like that. +the moment (2020-Nov-15). The script uses about 8MB of RAM. Something like +that. ~~~php #!/usr/bin/env php diff --git a/content/posts/2020-12-21-forking-git-repositories/index.md b/content/posts/2020-12-21-forking-git-repositories/index.md index 61af71d..7604209 100644 --- a/content/posts/2020-12-21-forking-git-repositories/index.md +++ b/content/posts/2020-12-21-forking-git-repositories/index.md @@ -22,11 +22,12 @@ into one single commit on the top of the commit history in my github repository. Time will tell, if this is a good approach... +{{< alert >}} **I am no expert** and this article helps me remembering this scenario with multiple repositories and their commit history. The logic behind this might not be correct, so if you have a better solution for this specific scenario, please let me know. I'm all up to learn this stuff the right way. -{:.note} +{{< /alert >}} ## If you have commits in your history diff --git a/content/posts/2021-08-12-running-n1mm-logger-on-linux/index.md b/content/posts/2021-08-12-running-n1mm-logger-on-linux/index.md index 4691e91..79b1d82 100644 --- a/content/posts/2021-08-12-running-n1mm-logger-on-linux/index.md +++ b/content/posts/2021-08-12-running-n1mm-logger-on-linux/index.md @@ -12,7 +12,7 @@ tags: [linux,windows,n1mm,emulation,wine] ## We need to talk again (an Update) -{{< alert note "Update" >}} +{{< alert >}} This is an update, the post was originally published on August 12th, 2021. Most of the content has changed. {{< /alert >}} @@ -113,7 +113,7 @@ $ env WINEPREFIX=/home/dominic/.wine-n1mm wine N1MM-Logger-Update-1.0.9243.exe Unselect `Run N1MM Logger+...` and close the installer. -{{< alert note >}} +{{< alert circle-info >}} Please not that those are examples, you need to start the files that **you** downloaded---they might differ in their version numbers. Also the declaration of the environment variable is used with the **fish shell**, for bash (maybe the @@ -160,7 +160,7 @@ You can click the big error message away, afterwards you get informed that AutoH is not installed. Click that away too and you're done for now. Setup your station details and move on with using N1MM Logger+ on linux. -{{< alert info >}} +{{< alert circle-info >}} There might be still bugs as those error messages at the installation of the .NET Framework didn't came from nothing---for what I've seen so far the menues are a bit tricky to handle as they tend to disappear when hovering with the mouse. @@ -174,7 +174,7 @@ Finally, there is a good result I think: Hopefully this article was helpful to somebody, as I have been sitting here now for a while doing all the exact steps from above to verify its validity---the reason for that was actually because I've seen that this specific article got -read quite a few times and I personally found it a bit confusing myself ;-) +read quite a few times and I personally found it a bit confusing myself :wink: vy 73 de Dominic, OE7DRT (going to bed now) diff --git a/content/posts/2021-10-03-winlink-and-vara-on-linux/index.md b/content/posts/2021-10-03-winlink-and-vara-on-linux/index.md index e430e6a..3c1871e 100644 --- a/content/posts/2021-10-03-winlink-and-vara-on-linux/index.md +++ b/content/posts/2021-10-03-winlink-and-vara-on-linux/index.md @@ -58,7 +58,7 @@ The following files have been re-uploaded on my website to create a duplicate resource for download, but primarily to prevent them from going offline in the case the resource goes down for whatever reason. -{{< alert note >}} +{{< alert circle-info >}} I do not claim them to be my creation, I just want them to be online on a place that I find again. {{< /alert >}} diff --git a/content/posts/2022-01-08-my-weather-station-with-weewx-and-netatmo/index.md b/content/posts/2022-01-08-my-weather-station-with-weewx-and-netatmo/index.md index c1ebe21..adede73 100644 --- a/content/posts/2022-01-08-my-weather-station-with-weewx-and-netatmo/index.md +++ b/content/posts/2022-01-08-my-weather-station-with-weewx-and-netatmo/index.md @@ -6,13 +6,13 @@ summary: > data to the [APRS-IS network](http://www.aprs-is.net/). date: 2022-01-08T14:34:54+01:00 categories: [amateur-radio] -tags: [wx] +tags: ["wx","linux"] --- ## Preparation -{{< alert note "PLEASE TAKE NOTICE" >}} +{{< alert >}} As I'm using a redhat based distribution I installed WeeWX with some help of . You may also need an account on for this to work. There you get your _client ID_ and @@ -133,10 +133,11 @@ your weather data into . ## Going further +{{< alert >}} **Advanced computer skills may be required for this**. You may end up editing some python scripts to finally get what you want. But if you want to learn something new, your weather page may benefit from that. -{:.note} +{{< /alert >}} You may also want to inspect the installed skins (templates) which reside in `/etc/weewx/skins`---adopt them to your needs and enable some more reports in diff --git a/content/posts/2022-07-04-pfsense-restore-broken-config/index.md b/content/posts/2022-07-04-pfsense-restore-broken-config/index.md index e3f7865..3e3c42d 100644 --- a/content/posts/2022-07-04-pfsense-restore-broken-config/index.md +++ b/content/posts/2022-07-04-pfsense-restore-broken-config/index.md @@ -88,9 +88,10 @@ configuration so this recovery process works quite well. Okay, that's it all for now. Please note that I do not use the UFS filesystem any more, so I won't add this to my little instruction set. +{{< alert circle-info >}} This post was actually older, I've saved the instructions in a textfile until I found the time to format it and publish it on my website. -{:.note title="For your information"} +{{< /alert >}} ## Sources diff --git a/content/posts/2022-07-04-systemd-flushing-the-dns-cache/index.md b/content/posts/2022-07-04-systemd-flushing-the-dns-cache/index.md index 3933be2..8e993e5 100644 --- a/content/posts/2022-07-04-systemd-flushing-the-dns-cache/index.md +++ b/content/posts/2022-07-04-systemd-flushing-the-dns-cache/index.md @@ -30,7 +30,7 @@ $ systemd-resolve --statistics ~~~ I usually do not need to flush my computers DNS caches, but fiddling with my -firewall at home made me use this very often last weeks. +firewall at home made me use this very often over the last few weeks. ## Sources diff --git a/content/posts/2022-07-10-raspberry-pi-4-64bit-dual-hat-hotspot-without-pi-star/index.md b/content/posts/2022-07-10-raspberry-pi-4-64bit-dual-hat-hotspot-without-pi-star/index.md index b298225..849f1be 100644 --- a/content/posts/2022-07-10-raspberry-pi-4-64bit-dual-hat-hotspot-without-pi-star/index.md +++ b/content/posts/2022-07-10-raspberry-pi-4-64bit-dual-hat-hotspot-without-pi-star/index.md @@ -16,7 +16,7 @@ a Raspberry Pi 4 using the 64 bit operating system “Raspberry Pi OS”. ## Preparation -{{< alert warning >}} +{{< alert >}} Do not use a cheap SD-card for your hotspot. We do not mount the filesystem read-only like on Pi-Star. {{< /alert >}} @@ -211,9 +211,11 @@ const uint32_t STARTUP_COUNT = 2U; I'll leave you with this, if you have no idea what you are doing here: you should probably leave those files just as they are... +{{< alert circle-info >}} _Those values were determined by Volker (DL2SDG) and I found them on one of the links below. Those values may not suit your configuratoin or board, so take them as a starting point and try the best values for you and your board._ +{{< /alert >}} ### Compile and upload to the board @@ -231,9 +233,10 @@ Finish this with a reboot of the Raspberry Pi. $ sudo reboot ~~~ +{{< alert circle-info >}} Note, that we used `-j4` as an argument of `make` because the Raspberry Pi 4 has 4 virtual cores and we use them to speed up the compilation process. -{:.note title="sidenote"} +{{< /alert >}} ### Finally @@ -1080,22 +1083,22 @@ back in school... And so I found some information in `Common/Defs.h`: -~~~cpp {linenostart=64} +{{< highlight cpp "linenos=table,hl_lines=2,linenostart=64">}} enum HW_TYPE { HW_HOMEBREW, HW_ICOM, HW_DUMMY }; -~~~ +{{< /highlight >}} -~~~cpp {linenostart=130} +{{< highlight cpp "linenos=table,hl_lines=3,linenostart=130">}} enum GATEWAY_TYPE { GT_REPEATER, GT_HOTSPOT, GT_DONGLE, GT_STARNET }; -~~~ +{{< /highlight >}} View those two online on github: [HW_TYPE], [GATEWAY_TYPE] @@ -1190,7 +1193,8 @@ $ sudo systemctl enable --now timeserver.service This is the end of the procedure if you want a working hotspot. If you want visualisation on a dashboard continue reading: we will install nginx as our -webserver and host the [dashboard made by Kim, DG9VH](https://github.com/dg9vh/MMDVMHost-Websocketboard). +webserver and host the +[dashboard made by Kim, DG9VH](https://github.com/dg9vh/MMDVMHost-Websocketboard). ## Dashboard diff --git a/content/posts/2022-08-07-using-nfs-on-a-raspberry-pi/index.md b/content/posts/2022-08-07-using-nfs-on-a-raspberry-pi/index.md index 42a295a..d04ee7d 100644 --- a/content/posts/2022-08-07-using-nfs-on-a-raspberry-pi/index.md +++ b/content/posts/2022-08-07-using-nfs-on-a-raspberry-pi/index.md @@ -37,9 +37,10 @@ We have to export our directories in the file `/etc/exports` on our Raspberry Pi So we allow `192.168.1.123` read- and write-access to the directories above. +{{< alert circle-info >}} For the record: my user on my laptop (192.168.1.123) has the same UID (1000) as my user on the Raspberry Pi (192.168.1.124). -{:.note title="Note this"} +{{< /alert >}} Also edit `/etc/hosts.allow` to grant access for your network or host. @@ -78,7 +79,7 @@ see a new line looking like: raspi4 rpc.mountd[30223]: authenticated mount request from 192.168.1.123:894 for /opt/MMDVMDash/html (/opt/MMDVMDash/html) ~~~ -{{< alert note >}} +{{< alert circle-info >}} **To eliminate the confusion:** I've mounted `/var/www/html` but the log shows `/opt/MMDVMDash/html`. This is because `/var/www/html` is currently a symbolic link to `/opt/MMDVMDash/html`. But if I remove the symlink and replace it with diff --git a/content/posts/2022-09-24-installation-of-log4om-on-linux/index.md b/content/posts/2022-09-24-installation-of-log4om-on-linux/index.md index 61f892b..cf45309 100644 --- a/content/posts/2022-09-24-installation-of-log4om-on-linux/index.md +++ b/content/posts/2022-09-24-installation-of-log4om-on-linux/index.md @@ -6,6 +6,7 @@ date = "2022-09-24T10:39:57+02:00" #lastmod = "" categories = ["amateur-radio"] tags = ["emulation","wine","mono", "linux", "windows"] +draft = true +++ diff --git a/content/posts/2022-09-25-using-vara-with-pat/index.md b/content/posts/2022-09-25-using-vara-with-pat/index.md deleted file mode 100644 index 77aa66e..0000000 --- a/content/posts/2022-09-25-using-vara-with-pat/index.md +++ /dev/null @@ -1,45 +0,0 @@ -+++ -title = "Using VARA with pat" -summary = """**pat** is known as Winlink replacement for Linux. Now it also -supports connections via VARA""" -date = "2022-09-25T09:49:24+02:00" -#lastmod = "" -categories = ["amateur-radio"] -tags = [] - -+++ - -I'm using zsh (not bash). - -~~~console -$ env WINEPREFIX=/home/dominic/.wine WINEARCH=win32 wine wineboot -$ env WINEPREFIX=/home/dominic/.wine WINEARCH=win32 wine winecfg - -$ env WINEPREFIX=/home/dominic/.wine WINEARCH=win32 winetricks sound=alsa -$ env WINEPREFIX=/home/dominic/.wine WINEARCH=win32 winetricks allfonts - -$ tar -cJf wine-backup-$(date +%Y-%m-%d-%H%M%S).tar.xz .wine/ - -$ #copy files to %WINDIR%/system32 -> create self-extracting archive... -~~~ - -run my self-extracting archive after installing vb6run - -- VARA_files_drt.exe - -when running winecfg check if Win7 is selected. - -Using WINEARCH=win32 makes the windows 32bit -- most verbs from winetricks only -install 32bit versions, so this is reason for 32bit windows... - -run wine Download/VARA_Setup - -run wine .wine/drive_c/VARA/VARA.exe - -should work... - -nt4 pdh files taken from: http://download.microsoft.com/download/winntsrv40/update/5.0.2195.2668/nt4/en-us/nt4pdhdll.exe - -sources: https://groups.io/g/VARA-MODEM/topic/installing_winlink_express/80678030 - -- 73's de ON4AIN - Jan - diff --git a/content/posts/2022-10-16-vpn-tunnel-into-hamnet-on-fedora-36/index.md b/content/posts/2022-10-16-vpn-tunnel-into-hamnet-on-fedora-36/index.md index 1ecef74..e4ba5ed 100644 --- a/content/posts/2022-10-16-vpn-tunnel-into-hamnet-on-fedora-36/index.md +++ b/content/posts/2022-10-16-vpn-tunnel-into-hamnet-on-fedora-36/index.md @@ -43,7 +43,7 @@ you got your login data). I got mine from [RWTH Aachen in Germany][1]. caption="I'm not using IPv6 at home..." >}} {{< figure src="hamnetvpn04.png" alt="IPSec settings" - caption="Somehow that setup only worked when I removed this setting?#*!" >}} + caption="Somehow that setup only worked when I removed this setting?" >}} {{< figure src="hamnetvpn05.png" alt="PPP settings" caption="And I ended up using those settings for PPP" >}} diff --git a/content/posts/2022-10-24-changing-network-metrics-on-fedora-36/index.md b/content/posts/2022-10-24-changing-network-metrics-on-fedora-36/index.md index 1fb4f67..490b1c8 100644 --- a/content/posts/2022-10-24-changing-network-metrics-on-fedora-36/index.md +++ b/content/posts/2022-10-24-changing-network-metrics-on-fedora-36/index.md @@ -2,12 +2,16 @@ title = "Network-metrics on Fedora 36" summary = """quick n dirty...""" date = "2022-10-23T20:15:44+02:00" -#lastmod = "" +lastmod = "2022-12-04T22:30:18+01:00" categories = ["computerstuff"] tags = ["fedora","linux","networking"] +draft = true + +++ +## first + If you are using NetworkManager, the proper way to change the metric for the default route is to modify the connection associated with interface enp0s3 in this way: ~~~console @@ -21,3 +25,42 @@ $ nmcli connection up ~~~ You can find the value for in the output of nmcli connection. + +## second + +~~~console +$ nmcli connection +NAME UUID TYPE DEVICE > +Magneto_5G 923ab10b-be81-4668-9aab-9602f11db2e5 wifi wlx00259ce03> +Alfodr b2bcc61c-19df-41f0-9790-ad1f7f8113f1 wifi wlo1 > +Kabelgebundene Verbindung 1 c75abc26-19eb-3fec-81b1-c4716b39a8f1 ethernet -- +~~~ + +~~~console +$ nmcli connection edit Alfodr + +===| nmcli interaktive Verbindungsbearbeitung |=== + +Bestehende Verbindung »802-11-wireless« wird bearbeitet: »Alfodr« + +Tippen Sie »help« oder »?«, um verfügbare Befehle anzuzeigen. +Geben Sie »print« ein, um alle Verbindungseigenschaften anzuzeigen. +Tippen Sie »describe [.]« für eine detaillierte Eigenschaftenbeschreibung. + +Sie können die folgenden Einstellungen bearbeiten: connection, 802-11-wireless (wifi), 802-11-wireless-security (wifi-sec), 802-1x, ethtool, match, ipv4, ipv6, hostname, tc, proxy +nmcli> set ipv4.route-metric 599 +nmcli> save +nmcli> quit +~~~ + +~~~console +$ sudo systemctl restart NetworkManager +~~~ + +Check routing table with + +~~~console +$ ip route +~~~ + +(which can also be written as `ip r`) diff --git a/content/posts/2022-11-01-winlink-on-linux-fix-invalid-handle-on-logfiles/index.md b/content/posts/2022-11-01-winlink-on-linux-fix-invalid-handle-on-logfiles/index.md index c6b3a33..75dc3e2 100644 --- a/content/posts/2022-11-01-winlink-on-linux-fix-invalid-handle-on-logfiles/index.md +++ b/content/posts/2022-11-01-winlink-on-linux-fix-invalid-handle-on-logfiles/index.md @@ -100,4 +100,4 @@ on your linux computer that usually opens `.log` files. That is ## The end Have you ever clicked on the Log menu in VARA or VARA FM? Well, that works -without those registry tweaks... I'm just saying :) +without those registry tweaks... I'm just saying :smile: diff --git a/content/posts/2022-11-21-hamnet-on-the-pfsense/01_create-ppp-interface.png b/content/posts/2022-11-21-hamnet-on-the-pfsense/01_create-ppp-interface.png index 166fabb..1a69677 100644 Binary files a/content/posts/2022-11-21-hamnet-on-the-pfsense/01_create-ppp-interface.png and b/content/posts/2022-11-21-hamnet-on-the-pfsense/01_create-ppp-interface.png differ diff --git a/content/posts/2022-11-21-hamnet-on-the-pfsense/02_create-l2tp-interface.png b/content/posts/2022-11-21-hamnet-on-the-pfsense/02_create-l2tp-interface.png index 1b03ccc..56e1ac1 100644 Binary files a/content/posts/2022-11-21-hamnet-on-the-pfsense/02_create-l2tp-interface.png and b/content/posts/2022-11-21-hamnet-on-the-pfsense/02_create-l2tp-interface.png differ diff --git a/content/posts/2022-11-21-hamnet-on-the-pfsense/03_interface-assignments.png b/content/posts/2022-11-21-hamnet-on-the-pfsense/03_interface-assignments.png index f842bb9..c192163 100644 Binary files a/content/posts/2022-11-21-hamnet-on-the-pfsense/03_interface-assignments.png and b/content/posts/2022-11-21-hamnet-on-the-pfsense/03_interface-assignments.png differ diff --git a/content/posts/2022-11-21-hamnet-on-the-pfsense/04_interface-configuration.png b/content/posts/2022-11-21-hamnet-on-the-pfsense/04_interface-configuration.png index c0433cc..59030c0 100644 Binary files a/content/posts/2022-11-21-hamnet-on-the-pfsense/04_interface-configuration.png and b/content/posts/2022-11-21-hamnet-on-the-pfsense/04_interface-configuration.png differ diff --git a/content/posts/2022-11-21-hamnet-on-the-pfsense/05_routes.png b/content/posts/2022-11-21-hamnet-on-the-pfsense/05_routes.png index 29a7ca2..e73b70d 100644 Binary files a/content/posts/2022-11-21-hamnet-on-the-pfsense/05_routes.png and b/content/posts/2022-11-21-hamnet-on-the-pfsense/05_routes.png differ diff --git a/content/posts/2022-11-21-hamnet-on-the-pfsense/06_status-gateways.png b/content/posts/2022-11-21-hamnet-on-the-pfsense/06_status-gateways.png index 4c4634d..1a85c9d 100644 Binary files a/content/posts/2022-11-21-hamnet-on-the-pfsense/06_status-gateways.png and b/content/posts/2022-11-21-hamnet-on-the-pfsense/06_status-gateways.png differ diff --git a/content/posts/2022-11-21-hamnet-on-the-pfsense/07_dhcp-server.png b/content/posts/2022-11-21-hamnet-on-the-pfsense/07_dhcp-server.png index dae3863..dc314d4 100644 Binary files a/content/posts/2022-11-21-hamnet-on-the-pfsense/07_dhcp-server.png and b/content/posts/2022-11-21-hamnet-on-the-pfsense/07_dhcp-server.png differ diff --git a/content/posts/2022-11-21-hamnet-on-the-pfsense/index.md b/content/posts/2022-11-21-hamnet-on-the-pfsense/index.md index f62b1d1..dd2d547 100644 --- a/content/posts/2022-11-21-hamnet-on-the-pfsense/index.md +++ b/content/posts/2022-11-21-hamnet-on-the-pfsense/index.md @@ -6,7 +6,6 @@ date = "2022-11-21T20:13:08+01:00" #lastmod = "" categories = ["amateur-radio"] tags = ["hamnet","pfSense","networking","linux"] -draft = true +++ @@ -21,8 +20,8 @@ In my recent [post about HAMNET]({{< ref "2022-10-16-vpn-tunnel-into-hamnet-on-fedora-36" >}}) I created an L2TP tunnel to the german VPN Server at the RWTH Aachen University on my laptop. Routes have been -added manually---the network was only available on my laptop. No other device -was able to connect to the HAMNET. +added manually---the network was only available on this particular computer. +No other device was able to connect to the HAMNET. Now I made some changes to my home network where I finally was able to create the tunnel on my main router/firewall. @@ -45,9 +44,9 @@ new PPP interface with the following specs: | Local IP | (leave empty) | | Gateway IP or hostname | **vpn.afu.rwth-aachen.de** | -You can change `vpn.afu.rwth-aachen.de` with the IP address of the server if you + ![screenshot showing the PPP configuration](02_create-l2tp-interface.png) diff --git a/content/posts/2022-11-26-change-a-submodule/index.md b/content/posts/2022-11-26-change-a-submodule/index.md new file mode 100644 index 0000000..cf80f43 --- /dev/null +++ b/content/posts/2022-11-26-change-a-submodule/index.md @@ -0,0 +1,22 @@ ++++ +title = "Change git submodule URL" +summary = """Another thing I forget constantly when using git: +Changing the remote URL of a submodule""" +date = "2022-12-01T20:08:17+01:00" +#lastmod = "" +categories = ["computerstuff"] +tags = ["til-git","reminders"] + ++++ + +If the location (URL) of the submodule has changed, then you can simply: + +1. Modify the .gitmodules file in the repo root to use the new URL. +2. Delete the submodule folder in the repo `rm -rf .git/modules/`. +3. Delete the submodule folder in the working directory `rm -rf `. +4. Run `git submodule sync`. +5. Run `git submodule update`. + +More complete info can be found elsewhere: + + diff --git a/content/posts/2022-12-04-installing-hugo-on-linux/index.md b/content/posts/2022-12-04-installing-hugo-on-linux/index.md new file mode 100644 index 0000000..d4896c4 --- /dev/null +++ b/content/posts/2022-12-04-installing-hugo-on-linux/index.md @@ -0,0 +1,112 @@ ++++ +title = "Installing hugo on Linux" +summary = """This is how I install hugo nowadays. Although that routine might +change anytime.""" +date = "2022-12-04T18:04:34+01:00" +lastmod = "2022-12-04T23:29:01+01:00" +categories = ["computerstuff"] +tags = ["linux","gohugo"] + +draft = true +[sitemap] +priority = 1.0 + ++++ + +## Build from source + +To build Hugo from source you must: + +- Install Git +- Install Go version 1.18 or later +- Update your PATH environment variable as described in the Go documentation + +The install directory is controlled by the GOPATH and GOBIN environment variables. If GOBIN is set, binaries are installed to that directory. If GOPATH is set, binaries are installed to the bin subdirectory of the first directory in the GOPATH list. Otherwise, binaries are installed to the bin subdirectory of the default GOPATH ($HOME/go or %USERPROFILE%\go). + +Then build and test: + +~~~console +$ go install -tags extended github.com/gohugoio/hugo@latest +$ hugo version +~~~ + +## Using hugo theme as module... + +### Quick start using Hugo + +Note: Ensure you have Go and Hugo installed, and that you have created a new Hugo project before proceeding. + +From your project directory, initialise Hugo Modules: + +~~~console +$ hugo mod init github.com// +~~~ + +Create config/_default/module.toml and add the following: + +~~~toml +[[imports]] +path = "github.com/jpanther/congo/v2" +~~~ + +Start your server using hugo server and the theme will be downloaded automatically. + +In the root folder of your website, delete the config.toml file that was generated by Hugo. Copy the *.toml config files from the theme into your config/_default/ folder. + +{{< alert >}} +Note: Do not overwrite the module.toml file you created above! +{{< /alert >}} + +You will find these theme config files in the Hugo cache directory, or download a copy from GitHub. + +Follow the Getting Started instructions to configure your website. + +## use Atom feeds + + +Define an appropriate media type and corresponding output format in config.toml: + +```toml +[mediaTypes] +[mediaTypes."application/atom"] +suffix = "xml" + +[outputFormats.Atom] +mediaType = "application/atom" +baseName = "index" +isPlainText = false +``` + +Tell Hugo to produce the home page in Atom and HTML formats, also in config.toml: + +```toml +[outputs] +home = [ "HTML", "Atom" ] +``` + +Put an index.atom.xml template file in your layouts directory. You can use the attached one as a starting point, don't forget to edit the author element appropriately or make it take the values from your config. + +```xml + + {{ with .Title }}{{.}} on {{ end }}{{ .Site.Title }} + + {{ .Date.Format "2006-01-02T15:04:05-0700" | safeHTML }} + + YOUR NAME HERE + YOUR EMAIL ADDRESS + DEFINITIVE URI OF YOUR WEB SITE + + {{ .Permalink }} + {{ range first 15 .Data.Pages }} + + {{ .Title }} + + {{ .Permalink }} + {{ .Date.Format "2006-01-02T15:04:05-0700" | safeHTML }} + {{ .Lastmod.Format "2006-01-02T15:04:05-0700" | safeHTML }} + {{ .Summary | html }} + + {{ end }} + +``` +source: diff --git a/go.mod b/go.mod index 6439afe..6cf7ae3 100644 --- a/go.mod +++ b/go.mod @@ -2,4 +2,4 @@ module github.com/oe7drt/oe7drt-website go 1.18 -require github.com/jpanther/congo/v2 v2.4.1 // indirect +require github.com/jpanther/congo/v2 v2.4.2 // indirect diff --git a/go.sum b/go.sum index 0b5189d..6c33523 100644 --- a/go.sum +++ b/go.sum @@ -2,3 +2,5 @@ github.com/jpanther/congo/v2 v2.4.0 h1:0fswnbuH8t0xHdeyLGeMCsTToZF+26btjvEVsAXTi github.com/jpanther/congo/v2 v2.4.0/go.mod h1:1S7DRoO1ZYS4YUdFd1LjTkdyjQwsjFWd8TqSfz3Jd+M= github.com/jpanther/congo/v2 v2.4.1 h1:F9Nqi08otWCB0fi+ImnHuCnB053S9HullPtF4DsvQVk= github.com/jpanther/congo/v2 v2.4.1/go.mod h1:1S7DRoO1ZYS4YUdFd1LjTkdyjQwsjFWd8TqSfz3Jd+M= +github.com/jpanther/congo/v2 v2.4.2 h1:c+WSf/9Mr+a/bR4w3YteHwnsS5eTWgkU0QC2Mqx9pjc= +github.com/jpanther/congo/v2 v2.4.2/go.mod h1:1S7DRoO1ZYS4YUdFd1LjTkdyjQwsjFWd8TqSfz3Jd+M= diff --git a/layouts/index.atom.xml b/layouts/index.atom.xml new file mode 100644 index 0000000..88e60eb --- /dev/null +++ b/layouts/index.atom.xml @@ -0,0 +1,38 @@ +{{- $pctx := . -}} +{{- if .IsHome -}}{{ $pctx = .Site }}{{- end -}} +{{- $pages := $pctx.RegularPages -}} +{{- $limit := .Site.Config.Services.RSS.Limit -}} +{{- if ge $limit 1 -}} +{{- $pages = $pages | first $limit -}} +{{- end -}} +{{- printf "" | safeHTML }} + + {{ if eq .Title .Site.Title }}{{ .Site.Title }}{{ else }}{{ with .Title }}{{.}} on {{ end }}{{ .Site.Title }}{{ end }} + + {{ .Date.Format "2006-01-02T15:04:05-0700" | safeHTML }} + + Dominic Reich “OE7DRT” + dominic@oe7drt.com + https://oe7drt.com + + {{ .Permalink }} + {{ range $pages }}{{ if ne .Params.feed_exclude true }} + + {{ .Title }} + + Dominic Reich “OE7DRT” + dominic@oe7drt.com + https://oe7drt.com + + + {{ .Permalink }} + {{ .Date.Format "2006-01-02T15:04:05-0700" | safeHTML }} + {{ .Lastmod.Format "2006-01-02T15:04:05-0700" | safeHTML }} + {{ if .Site.Params.rssFullContent }} + {{ .Content | html }} + {{ else }} + {{ .Summary | htmlUnescape | markdownify }} + {{ end }} + + {{ end }}{{ end }} + diff --git a/layouts/robots.txt b/layouts/robots.txt new file mode 100644 index 0000000..cca89e2 --- /dev/null +++ b/layouts/robots.txt @@ -0,0 +1,6 @@ +User-agent: * +Sitemap: {{ "sitemap.xml" | absLangURL }} + +Disallow: /cgi-bin/ +Disallow: /tags/ +{{ range where .Data.Pages "Params.robotsdisallow" true }}Disallow: {{ .RelPermalink }}{{ end }} \ No newline at end of file diff --git a/layouts/sitemap.xml b/layouts/sitemap.xml new file mode 100644 index 0000000..a44870a --- /dev/null +++ b/layouts/sitemap.xml @@ -0,0 +1,11 @@ +{{ "" | safeHTML }} + + {{ range .Data.Pages }} + + {{ .Permalink }}{{ if not .Lastmod.IsZero }} + {{ safeHTML ( .Lastmod.Format "2006-01-02T15:04:05-07:00" ) }}{{ end }}{{ with .Sitemap.ChangeFreq }} + {{ . }}{{ end }}{{ if ge .Sitemap.Priority 0.0 }} + {{ .Sitemap.Priority }}{{ end }} + + {{ end }} + diff --git a/static/sitemap.xsl b/static/sitemap.xsl new file mode 100644 index 0000000..44c083a --- /dev/null +++ b/static/sitemap.xsl @@ -0,0 +1,115 @@ + + + + + + + XML Sitemap + + + + +
+

XML Sitemap

+

+ This is a sitemap generated by Hugo to allow search engines to discover this blog's content. +

+

+ The xsl style is based on Ghost. +

+ + + + + + + + + + + + + + + + + + + + + +
URL ( total)PrioCh. Freq.Last Modified
+ + + + + + + + + + + + +
+
+ + + + + \ No newline at end of file