You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

31 KiB

title summary date lastmod categories tags
Raspberry Pi 4 (64 bit) DUAL_HAT Hotspot Working without Pi-Star on a fresh and lightweight Raspberry Pi OS (64 bit) installation. One of the longer articles over here... 2022-07-10T14:27:28+02:00 2022-08-20T07:55:25+02:00
amateur-radio
pistar
dmr
ysf
dstar
hotspot
mmdvm

This is my attempt to create a lightweight hotspot for DMR, D-STAR and C4FM on a Raspberry Pi 4 using the 64 bit operating system “Raspberry Pi OS”.

Preparation

{{< alert >}} Do not use a cheap SD-card for your hotspot. We do not mount the filesystem read-only like on Pi-Star. {{< /alert >}}

  1. Download the operating software image from raspberrypi.com.

  2. Boot the Raspberry Pi and set it up to your needs.

    • Localisation
    • Keyboard layout
    • Install needed packages
    • Install your favourite shell (bash, zsh, fish, csh ...)
  3. Disable the serial console (and we will also disable Bluetooth)

    • Open /boot/cmdline.txt and remove the text console=serial0,115200

    • Open /boot/config.txt and add to the end

      dtoverlay=disable-bt
      enable_uart=1
      

      You may also run raspi-config and disable the console from there. Choose 3 Interface Options » I6 Serial Port » No (login shell) » Yes (serial hardware) » OK

      Disable the services

      $ sudo systemctl disable serial-getty@ttyAMA0.service
      $ sudo systemctl disable bluetooth.service
      

      Reboot the Raspberry Pi after those changes!

      $ sudo reboot
      
  4. Install the needed packages to compile the software later

    $ sudo apt update -y
    $ sudo apt full-upgrade
    $ sudo apt install git build-essential zsh nmap lsof vim cmake gcc-arm-none-eabi stm32flash libusb-1.0-0-dev libasound2-dev libwxgtk3.0-gtk3-dev
    

    Because wiringPi is currently not available from official sources, we have to install it manually.

    $ git clone git@github.com:WiringPi/WiringPi.git
    $ cd wiringPi
    $ ./build
    

    This should suffice, make sure to read INSTALL and follow its instructions.

    Check wiringPi with gpio -v or gpio readall:

    $ gpio -v
    gpio version: 2.70
    Copyright (c) 2012-2018 Gordon Henderson
    This is free software with ABSOLUTELY NO WARRANTY.
    For details type: gpio -warranty
    
    Raspberry Pi Details:
    Type: Pi 4B, Revision: 01, Memory: 4096MB, Maker: Sony
      * Device tree is enabled.
      *--> Raspberry Pi 4 Model B Rev 1.1
      * This Raspberry Pi supports user-level GPIO access.
    
  5. Create a non-privileged user called mmdvm and add the user to the group dialout

    $ sudo useradd mmdvm -g mmdvm -s /sbin/nologin
    $ sudo usermod mmdvm -G dialout
    

    I had some problems with wiringPi, so I finally added the user mmdvm to the groups gpio and kmem. (To let the user mmdvm access /dev/mem and /dev/gpiomem.)

    $ sudo usermod -G gpio,kmem -a mmdvm
    

Firmware

I hope we did not forgot: we use a DUAL_HAT extension on our Raspberry Pi and we have to compile the correct firmware for this. The actual version of the firmware is at 1.6.0:

MMDVM_HS_Dual_Hat-v1.6.0 20210919 12.2880MHz dual ADF7021 FW by CA6JAU GitID #d4cb546

But let us move to the fun (work) part.

Get the code

Clone the git repository. I prefer this in a separate folder like ~/git.

$ git clone --recursive git@github.com:juribeparada/MMDVM_HS.git

Configuration

Enter the directory and copy an appropriate default configuration for your board.

$ cp configs/MMDVM_HS_Dual_Hat-12mhz.h Config.h

Edit the file to your needs. The example below is what I use, be aware of the version of the installed TCXO of 12.2880 MHz!

// file: "Config.h"
#if !defined(CONFIG_H)
#define  CONFIG_H

#define MMDVM_HS_DUAL_HAT_REV10
#define ENABLE_ADF7021
#define DUPLEX
#define ADF7021_12_2880
#define AD7021_GAIN_HIGH
#define STM32_USART1_HOST
#define I2C_ADDR 0x22
#define ENABLE_SCAN_MODE
#define SEND_RSSI_DATA
#define SERIAL_REPEATER
#define SERIAL_REPEATER_BAUD 115200
#define QUIET_MODE_LEDS
#define DISCREET_SRV_LED_INVERTED
#define ENABLE_UDID

#endif

Those settings are also interesting to play with in the file ADF7021.h:

// file: "ADF7021.h"
// Disable TX Raised Cosine filter for 4FSK modulation in ADF7021:
#define ADF7021_DISABLE_RC_4FSK

// Enable AFC support for DMR, YSF, P25, and M17 (experimental):
// (AFC is already enabled by default in D-Star)
// #define ADF7021_ENABLE_4FSK_AFC

// Configure AFC with positive initial frequency offset:
// #define ADF7021_AFC_POS

I only disabled the Raised Cosine filter for 4FSK modulation because this works best for me. Enabling AFC did only cause lots of synchronisation errors on DMR. Also more firmware read errors occured with 4FSK AFC enabled.

You may want to leave that file intact if you just want your hotspot work without fiddling around with the source code.

Fine tuning and experimenting

If you want a hotspot that works: move over to the compilation process. If you want better response times on DMR keep on reading.

You may want to consider making the following changes on those two files.

// file: "DMRDMOTX.cpp"
//m_txDelay(240U),      // 200ms
m_txDelay(120U),      // 200ms
// file: "DMRDMOTX.cpp"
void CDMRDMOTX::setTXDelay(uint8_t delay)
{
    //m_txDelay = 600U + uint16_t(delay) * 12U;        // 500ms + tx delay
    m_txDelay = 60U + uint16_t(delay) * 12U;
}
// file: "DMRTX.cpp"
// const uint32_t STARTUP_COUNT = 20U;
const uint32_t STARTUP_COUNT = 2U;

I'll leave you with this, if you have no idea what you are doing here: you should probably leave those files just as they are...

{{< alert circle-info >}} Those values were determined by Volker (DL2SDG) and I found them on one of the links below. Those values may not suit your configuratoin or board, so take them as a starting point and try the best values for you and your board. {{< /alert >}}

Compile and upload to the board

If no errors were made in Config.h this should be as easy as the steps above.

$ make clean
$ make -j4
$ sudo make mmdvm_hs_dual_hat

Finish this with a reboot of the Raspberry Pi.

$ sudo reboot

{{< alert circle-info >}} Note, that we used -j4 as an argument of make because the Raspberry Pi 4 has 4 virtual cores and we use them to speed up the compilation process. {{< /alert >}}

Finally

And, as many operators tend to ignore manuals a lot, here are a few links that you can should read.

MMDVMHost

This is the program that connects our Gateways with the hardware board. This could be referred as the modem probably.

Get the code

We run this command also in our separated git folder. Just to keep all those git repositories in one place.

$ git clone git@github.com:g4klx/MMDVMHost.git

Compile the code

Enter the newly created directory and compile it.

$ make -j4 -f Makefile.Pi

Install the executables into /usr/local/bin by executing

$ sudo make install

Configuration

Copy the default configuration file to /etc:

$ sudo cp MMDVM.ini /etc/

and edit it to your needs. Most of the options are self-explanatory and I will only publish some excerpts of my /etc/MMDVM.ini file.

# file: "/etc/MMDVM.ini"
[Log]
# Logging levels, 0=No logging
DisplayLevel=2
FileLevel=2
FilePath=/var/log/mmdvm
FileRoot=MMDVM
FileRotate=0

[Modem]
Hardware=mmdvmhshat
# Valid values are "null", "uart", "udp", and (on Linux) "i2c"
Protocol=uart
# The port and speed used for a UART connection
# UARTPort=\\.\COM4
# UARTPort=/dev/ttyACM0
UARTPort=/dev/ttyAMA0
UARTSpeed=115200
# The port and address for an I2C connection
I2CPort=/dev/i2c
I2CAddress=0x22
# IP parameters for UDP connection
ModemAddress=192.168.2.100
ModemPort=3334
LocalAddress=192.168.2.1
LocalPort=3335
TXInvert=1
RXInvert=0
PTTInvert=0
TXDelay=100
RXOffset=-50
TXOffset=300
DMRDelay=0
RXLevel=50
TXLevel=50
RXDCOffset=0
TXDCOffset=0
RFLevel=100
# CWIdTXLevel=50
# D-StarTXLevel=50
# DMRTXLevel=50
# YSFTXLevel=50
# P25TXLevel=50
# NXDNTXLevel=50
# M17TXLevel=50
# POCSAGTXLevel=50
# FMTXLevel=50
# AX25TXLevel=50
RSSIMappingFile=/usr/local/etc/RSSI.dat
UseCOSAsLockout=0
Trace=0
Debug=0

[D-Star]
Enable=1
Module=B
SelfOnly=0
AckReply=1
AckTime=750
AckMessage=0
ErrorReply=1
RemoteGateway=0
# ModeHang=10
WhiteList=

[DMR]
Enable=1
# Set your hotspot ID here (use your own DMR-ID and append two digits to it)
Id=XXXXXXXXX
Beacons=0
BeaconInterval=60
BeaconDuration=3
ColorCode=1
SelfOnly=0
EmbeddedLCOnly=0
DumpTAData=1
# Prefixes=234,235
# Slot1TGWhiteList=
# Slot2TGWhiteList=
CallHang=3
TXHang=4
# ModeHang=10
# OVCM Values, 0=off, 1=rx_on, 2=tx_on, 3=both_on, 4=force off
# OVCM=0

[System Fusion]
Enable=1
LowDeviation=0
SelfOnly=0
TXHang=4
RemoteGateway=0
# ModeHang=10

[D-Star Network]
Enable=1
LocalAddress=127.0.0.1
LocalPort=20011
GatewayAddress=127.0.0.1
GatewayPort=20010
# ModeHang=3
Debug=0

[DMR Network]
Enable=1
# Type may be either 'Direct' or 'Gateway'. When Direct you must provide the Master's
# address as well as the Password, and for DMR+, Options also.
#Type=Direct
Type=Gateway
LocalAddress=127.0.0.1
LocalPort=62032
RemoteAddress=127.0.0.1
RemotePort=62031
#RemoteAddress=89.185.97.34
#RemotePort=55555
Password=passw0rd
# Password=P@ssw0rd1234
#Jitter=360
Jitter=0
Slot1=1
Slot2=1
# You would need the Options line if you want to connect MMDVMHost directly
# to a DMR server (without Gateway)
# Options="StartRef=4000;RelinkTime=15;UserLink=1;"
# ModeHang=3
Debug=0

[System Fusion Network]
Enable=1
LocalAddress=127.0.0.1
LocalPort=3200
GatewayAddress=127.0.0.1
GatewayPort=4200
# ModeHang=3
Debug=0

These are the most important parts of the configuration---make sure that you double check your file and insert your callsign and DMRID number correctly.

Within [DMR] you see the line starting with Id=. This is where you place the final Id for the DMR network, use your DMRID and append two digits to it, so you can run multiple hotspots on the same network/server (with different Ids, but still valid as they all start with your legit DMRID).

Create log file directory

$ sudo mkdir /var/log/mmdvm
$ sudo chown mmdvm:mmdvm /var/log/mmdvm

Check for errors

To check for errors, run MMDVMHost directly before setting up a system service. Make sure, that you have set Daemon=0 in your MMDVM.ini file for this test. Start MMDVMHost as user mmdvm

$ sudo -u mmdvm MMDVMHost /etc/MMDVM.ini

Set Daemon=1 back in your MMDVM.ini if you haven't already.

Setup the system service

Copy the unit file for Systemd to the system.

$ sudo cp linux/systemd/mmdvmhost.service /etc/systemd/system/

No modification should be needed, but for reference this is the content of the file:

# file: "/etc/systemd/system/mmdvmhost.service"
[Unit]
Description=MMDVMHost Radio Service
After=syslog.target network.target

[Service]
User=mmdvm
Type=forking
ExecStart=/usr/local/bin/MMDVMHost
Restart=on-abnormal

[Install]
WantedBy=multi-user.target

Start and enable this service in one go with

$ sudo systemctl daemon-reload
$ sudo systemctl enable --now mmdvmhost.service

DMRGateway

We want to connect our hotspot to the austrian IPSC2-OE-DMO server aswell as the austrian brandmeister master server (BM2321).

Get the code

$ git clone git@github.com:g4klx/DMRGateway.git

Configuration

# file: "/etc/DMRGateway.ini"
[General]
Timeout=10
# RFTimeout=10
# NetTimeout=7
RptAddress=127.0.0.1
RptPort=62032
LocalAddress=127.0.0.1
LocalPort=62031
RuleTrace=0
Daemon=1
Debug=0

[Log]
# Logging levels, 0=No logging
DisplayLevel=2
FileLevel=2
FilePath=/var/log/mmdvm
FileRoot=DMRGateway
FileRotate=0

[Voice]
Enabled=1
Language=en_GB
Directory=/home/pi/git/DMRGateway/Audio

[Info]
Latitude=0.0
Longitude=0.0
Height=0
Location=Location, GRID
Description=Multi-Mode Hotspot
URL=https://oe7drt.com

[XLX Network]
Enabled=0
File=XLXHosts.txt
Port=62030
Password=passw0rd
ReloadTime=60
# Local=3351
Slot=1
TG=6
Base=64000
Startup=950
Relink=10
Debug=0
#Allow user linking control using Private Calls
UserControl=1
#Override default module for startup reflector
#Module=A

# BrandMeister
[DMR Network 1]
Enabled=1
Name=BM
Address=94.199.173.125
Port=62031
#Local=3352
# Local cluster
#TGRewrite=1,9,1,9,1
# Echo on RF slot 1 TG9990 to network slot 1 9990
TypeRewrite=1,9990,1,9990
SrcRewrite=1,9990,1,9990,1
# Dynamic rewriting of slot 2 TGs 90-999999 to TG9 to emulate reflector behaviour
#TGDynRewrite=2,90,4000,5000,9,999910,9990
# For normal repeater operation disable TGDyn coment out the above line
# After that remove the coments below
PassAllTG=1
# PassAllTG=2
# Pass all of the other private traffic on slot 1 and slot 2
PassAllPC=1
#PassAllPC=2
Password=passw0rd
Location=0
Debug=0

# DMR+
[DMR Network 2]
Enabled=1
Name=DMR+
Address=89.185.97.34
Port=55555
# Local=3352
Password=PASSWORD
Options="StartRef=4000;RelinkTime=15;UserLink=1;TS1_1=110;"
TGRewrite=2,6,1,6,2
TGRewrite=2,110,1,110,1
TGRewrite=2,120,1,120,1
TGRewrite=2,130,1,130,1
TGRewrite=2,232,1,232,1
TGRewrite=2,8180,1,8180,10
TGRewrite=2,8191,1,8191,9
TGRewrite=2,9990,2,9990,1
TGRewrite=2,9,2,9,1
#PCRewrite=2,4000,2,4000,1001
PassAllPC=2
Location=0
Debug=0

[...]

[GPSD]
Enable=0
Address=127.0.0.1
Port=2947

[APRS]
Enable=0
Address=127.0.0.1
Port=8673
Description=APRS Description
Suffix=3

[Dynamic TG Control]
Enabled=1
Port=3769

[Remote Control]
Enable=0
Address=127.0.0.1
Port=7643

Test your setup

Change the configuration from above to Daemon=0 and start DMRGateway in a terminal with

$ sudo -u mmdvm DMRGateway /etc/DMRGateway.ini

Check for errors and move on when everything is fine. You should hear the announcement coming from the ISPC2 server. In our case (Ref 4000) we should hear something like "Not connected" or "Repeater not connected".

Create a system service

I copied the unit file from mmdvmhost.service and made my changes. If you don't want to do that by yourself, use this one to start with.

# file: "/etc/systemd/system/dmrgateway.service"
[Unit]
Description=DMRGateway Radio Service
After=syslog.target network.target mmdvmhost.service

[Service]
User=mmdvm
Type=forking
ExecStart=/usr/local/bin/DMRGateway
Restart=on-abnormal

[Install]
WantedBy=multi-user.target

Change the configuration back Daemon=1 and enable the service/unit.

$ sudo systemctl enable --now dmrgateway.service

YSFGateway (C4FM, YSF, YCS)

What we define: connect our hotspot to the AT-C4FM-Austria reflector via YSF.

Get the code

Use a quite actual but modified version of YSFClients

This is a fork of the original repository by Jonathan, G4KLX.

The only reason for using this version is the proper display in the servers dashboard. You will see your location aswell as the used frequency and the YSFGateway type in the YCS232 dashboard.

This version might not be as actual as the original repository, but it is ready-to-use with the changes made by Kurt, OE1KBC back in 2021.

I've included his changes in my fork and created a branch called YCS232.

$ git clone git@github.com:oe7drt/YSFClients.git
$ cd YSFClients
$ git fetch --all
$ git checkout YCS232

You can also add the original sources as an additional remote:

$ git remote add upstream git@github.com:g4klx/YSFClients.git
$ git fetch --all

Original, most actual codebase

$ git clone git@github.com:g4klx/YSFClients.git

Either choice of source, compile it

Enter the created directory YSFClients and compile the code. Install them into /usr/local/bin

$ cd YSFClients
$ make -j4
$ sudo make install

Configuration

Copy the default configuration file into /etc

$ sudo cp YSFGateway/YSFGateway.ini /etc/

and edit the file. Here are some excerpts of mine:

# file: "/etc/YSFGateway.ini"
[General]
Callsign=OE7DRT
Suffix=RPT
# Suffix=ND
Id=XXXXXXX
RptAddress=127.0.0.1
RptPort=3200
LocalAddress=127.0.0.1
LocalPort=4200
WiresXMakeUpper=1
WiresXCommandPassthrough=0
Debug=0
Daemon=1

[Info]
RXFrequency=430600000
TXFrequency=439075000
Power=1
Latitude=0.0
Longitude=0.0
Height=0
Name=Location, GRID
Description=Multi-Mode Hotspot

[Log]
# Logging levels, 0=No logging
DisplayLevel=2
FileLevel=2
FilePath=/var/log/mmdvm
FileRoot=YSFGateway
FileRotate=1

[APRS]
Enable=0
Address=127.0.0.1
Port=8673
Description=APRS Description
Suffix=Y

[Network]
# Startup=FCS00120
Startup=AT-C4FM-Austria
# book DG-ID for Reflector
Options=10,20,22,24,28,32,62,35
InactivityTimeout=0
Revert=0
Debug=0

[YSF Network]
Enable=1
Port=42000
Hosts=/usr/local/etc/YSFHosts.txt
ReloadTime=60
ParrotAddress=127.0.0.1
ParrotPort=42012
YSF2DMRAddress=127.0.0.1
YSF2DMRPort=42013
YSF2NXDNAddress=127.0.0.1
YSF2NXDNPort=42014
YSF2P25Address=127.0.0.1
YSF2P25Port=42015

[FCS Network]
Enable=0
Rooms=./FCSRooms.txt
Port=42001

This is not the full file, but pretty much of it. Adopt to your needs but check and double-check that file like the other configuration files.

Test your setup

Change Daemon=0 in the configuration file for the test and run

$ sudo -u mmdvm YSFGateway /etc/YSFGateway.ini

You should see yourself in the dashboard and also the screen should print something like Linked to AT-C4FM-AUSTRIA and Link successful to MMDVM.

Stop it with CTRL + C and move on to create a system service (unit file) for Systemd.

Change Daemon=1 back in your config if not already done.

Setup a system service

Create the unit file /etc/systemd/system/ysfgateway.service

# file: "/etc/systemd/system/ysfgateway.service"
[Unit]
Description=YSFGateway Service
After=syslog.target network.target

[Service]
User=mmdvm
Type=forking
ExecStart=/usr/local/bin/YSFGateway
Restart=on-abnormal

[Install]
WantedBy=multi-user.target

Start and enable the service.

$ sudo systemctl daemon-reload
$ sudo systemctl enable --now ysfgateway.service

ircDDBGateway (D-STAR)

Okay, this was the hardest part for me because I haven't found much information about what programs and configuration files are really needed for D-STAR to work properly---I'm not even sure now if it is working fine or if something is still missing.

So the information in this section may be inaccurate or even wrong. Consider that, but if you have a correct answer I would be happy to hear about it.

I think that dstarrepeater was only used for the first hardware and it's work is now done from MMDVMHost. Again, correct me if I'm wrong.

Get the code

In our ~/git directory (where else?)

$ git clone git@github.com:g4klx/ircDDBGateway.git

Compile the code and install the programs

Open Makefile and change the parameters on top of the file to your needs. I like to use /var/log/mmdvm, /usr/local/bin and /usr/local/etc for example...

$ cd ircDDBGateway
$ make -j4
$ sudo make install

Configuration

Sadly, I haven't found any configuration file as an example, so I referred to the configuration files on anothor hotspot that was running Pi-Star.

These are the files that I use at the moment, changes may be done if needed.

/etc/ircddbgateway

# file: "/etc/ircddbgateway"
gatewayType=1
# gatewayType=0 is the default, but Pi-Star uses 1 here
# 0 repeater, 1 hotspot, 2 dongle, 3 starnet
gatewayCallsign=N0SIGN
gatewayAddress=0.0.0.0
icomAddress=172.16.0.20
icomPort=20000
hbAddress=127.0.0.1
hbPort=20010
latitude=0.0
longitude=0.0
description1=Location, GRID
description2=Location State
url=https://qrz.com/db/N0SIGN
repeaterCall1=N0SIGN
repeaterBand1=B
# repeaterType1=0 homebrew, 1 icom, 2 dummy
repeaterType1=0
repeaterAddress1=127.0.0.1
repeaterPort1=20011
reflector1=DCS009 A
atStartup1=1
reconnect1=0
frequency1=439.07500
offset1=-8.4750
rangeKms1=1.000
latitude1=0.0
longitude1=0.0
agl1=3.000
description1_1=Location, GRID
description1_2=Location State
url1=
band1_1=0
band1_2=0
band1_3=0
repeaterCall2=
repeaterBand2= 
repeaterType2=0
repeaterAddress2=127.0.0.1
repeaterPort2=20012
reflector2=
atStartup2=0
reconnect2=0
frequency2=0.00000
offset2=0.0000
rangeKms2=0.000
latitude2=0.000000
longitude2=0.000000
agl2=0.000
description2_1=
description2_2=
url2=
band2_1=0
band2_2=0
band2_3=0
repeaterCall3=
repeaterBand3= 
repeaterType3=0
repeaterAddress3=127.0.0.1
repeaterPort3=20013
reflector3=
atStartup3=0
reconnect3=0
frequency3=0.00000
offset3=0.0000
rangeKms3=0.000
latitude3=0.000000
longitude3=0.000000
agl3=0.000
description3_1=
description3_2=
url3=
band3_1=0
band3_2=0
band3_3=0
repeaterCall4=
repeaterBand4= 
repeaterType4=0
repeaterAddress4=127.0.0.1
repeaterPort4=20014
reflector4=
atStartup4=0
reconnect4=0
frequency4=0.00000
offset4=0.0000
rangeKms4=0.000
latitude4=0.000000
longitude4=0.000000
agl4=0.000
description4_1=
description4_2=
url4=
band4_1=0
band4_2=0
band4_3=0
ircddbEnabled=1
ircddbHostname=ircv4.openquad.net
ircddbUsername=N0SIGN
ircddbPassword=
ircddbEnabled2=0
ircddbHostname2=rr.openquad.net
ircddbUsername2=
ircddbPassword2=
ircddbEnabled3=0
ircddbHostname3=
ircddbUsername3=
ircddbPassword3=
ircddbEnabled4=0
ircddbHostname4=
ircddbUsername4=
ircddbPassword4=
aprsEnabled=1
aprsHostname=euro.aprs2.net
aprsPassword=00000
aprsPort=14580
dextraEnabled=1
dextraMaxDongles=5
dplusEnabled=1
dplusMaxDongles=5
dplusLogin=N0SIGN 
dcsEnabled=1
ccsEnabled=1
ccsHost=CCS704  
xlxEnabled=0
xlxOverrideLocal=0
xlxHostsFileUrl=http://xlxapi.rlx.lu/api.php?do=GetXLXDMRMaster
starNetBand1=A
starNetCallsign1=        
starNetLogoff1=        
starNetInfo1=
starNetPermanent1=        
starNetUserTimeout1=300
starNetGroupTimeout1=300
starNetCallsignSwitch1=0
starNetTXMsgSwitch1=1
starNetReflector1=
starNetBand2=A
starNetCallsign2=        
starNetLogoff2=        
starNetInfo2=
starNetPermanent2=        
starNetUserTimeout2=300
starNetGroupTimeout2=300
starNetCallsignSwitch2=0
starNetTXMsgSwitch2=1
starNetReflector2=
starNetBand3=A
starNetCallsign3=        
starNetLogoff3=        
starNetInfo3=
starNetPermanent3=        
starNetUserTimeout3=300
starNetGroupTimeout3=300
starNetCallsignSwitch3=0
starNetTXMsgSwitch3=1
starNetReflector3=
starNetBand4=A
starNetCallsign4=        
starNetLogoff4=        
starNetInfo4=
starNetPermanent4=        
starNetUserTimeout4=300
starNetGroupTimeout4=300
starNetCallsignSwitch4=0
starNetTXMsgSwitch4=1
starNetReflector4=
starNetBand5=A
starNetCallsign5=        
starNetLogoff5=        
starNetInfo5=
starNetPermanent5=        
starNetUserTimeout5=300
starNetGroupTimeout5=300
starNetCallsignSwitch5=0
starNetTXMsgSwitch5=1
starNetReflector5=
remoteEnabled=1
remotePassword=raspberry
#remotePort=54321
remotePort=10022
language=0
infoEnabled=1
echoEnabled=1
logEnabled=1
dratsEnabled=0
dtmfEnabled=1
mobileGPSEnabled=0
mobileGPSAddress=127.0.0.1
mobileGPSPort=7834
windowX=-1
windowY=-1

I wasn't aware what numbers need to be set on gatewayType or repeaterType, but a look into the source code made my decision easier. I'm not sure if that is correctly interpreted as I never finished learning C++ but I learned the basics back in school...

And so I found some information in Common/Defs.h:

{{< highlight cpp "linenos=table,hl_lines=2,linenostart=64">}} enum HW_TYPE { HW_HOMEBREW, HW_ICOM, HW_DUMMY }; {{< /highlight >}}

{{< highlight cpp "linenos=table,hl_lines=3,linenostart=130">}} enum GATEWAY_TYPE { GT_REPEATER, GT_HOTSPOT, GT_DONGLE, GT_STARNET }; {{< /highlight >}}

View those two online on github: HW_TYPE, GATEWAY_TYPE

/etc/timeserver

timeserverd is used to produce time announcements. The interval of these can be set to

  • every 15 minutes:
    interval=0
  • every 30 minutes:
    interval=1
  • every hour:
    interval=2

Adopt those changes in /etc/timeserver.

# file: "/etc/timeserver"
callsign=N0SIGN
sendA=0
sendB=1
sendC=0
sendD=0
sendE=0
address=127.0.0.1
language=3
format=1
interval=2
windowX=0
windowY=0

First run

$ sudo -u mmdvm ircddbgatewayd

Abort with CTRL + C when done.

Create the system services

You could copy over the unit files from ./debian, but the paths in those files need adjustement, so we create them directly with sudo vim /etc/systemd/system/...

# file: "/etc/systemd/system/ircddbgateway.service"
[Unit]
Description=D-STAR Gateway Daemon
After=network.target

[Service]
User=mmdvm
ExecStart=/usr/local/bin/ircddbgatewayd
Restart=on-abort

[Install]
WantedBy=multi-user.target
# file: "/etc/systemd/system/timeserver.service"
[Unit]
Description=Timeserver (ircDDBGateway) Daemon
After=syslog.target network.target ircddbgateway.service

[Service]
User=mmdvm
Type=forking
ExecStart=/usr/local/bin/timeserverd -daemon
#ExecStop=/usr/local/sbin/timeserver.service stop
#ExecReload=/usr/local/sbin/timeserver.service restart
Restart=on-abort

[Install]
WantedBy=multi-user.target

Enable the services

$ sudo systemctl daemon-reload
$ sudo systemctl enable --now ircddbgateway.service
$ sudo systemctl enable --now timeserver.service

The hotspot works

This is the end of the procedure if you want a working hotspot. If you want visualisation on a dashboard continue reading: we will install nginx as our webserver and host the dashboard made by Kim, DG9VH.

Dashboard

Preparation

There are a few things to prepare, before we can finally visualize the electro-magnetic stream in the air.

Install some needed packages

$ sudo apt install python3-websockets python3-pip
$ sudo pip3 install ansi2html
$ sudo apt install python3-gpiozero python3-psutil python3-serial

Refer to the installation instructions on the repository for more information and the full instructions.

Allow the logtailer program access to MMDVMHost with sudo visudo and add this line to the user section of the sudoers file:

www-data ALL=(ALL) NOPASSWD: /usr/local/bin/MMDVMHost

Webserver or built-in solution?

We could use a built-in solution to host our dashboard using Python. This is a fancy way to host a dashboard but I've never used such solutions myself, so I'll stick to a real webserver in this article.

Install nginx with php support with

$ sudo apt install nginx php-fpm
Configure and limit webserver

I've already added some limiting directives into the default configuration. We should not need this with the websockets based dashboard, but I add this anyway.

We also added index.php to the index directive, but not in front of the filenames → we want to disable the dashboard with an empty index.html file that we create in the document root of our webserver (sudo touch /var/www/html/index.html).

# file: "/etc/nginx/sites-enabled/default"
limit_req_zone $binary_remote_addr zone=mylimit:10m rate=2r/s;

# Default server configuration
#
server {
  listen 80 default_server;
  listen [::]:80 default_server;
  limit_req zone=mylimit burst=5 nodelay;
  # limit_req_status 444;

  # SSL configuration
  #
  # listen 443 ssl default_server;
  # listen [::]:443 ssl default_server;
  #
  # [...]
  #
  # include snippets/snakeoil.conf;

  root /var/www/html;

  # Add index.php to the list if you are using PHP
  index index.html index.php index.htm index.nginx-debian.html;

  server_name _;

  location / {
    # First attempt to serve request as file, then
    # as directory, then fall back to displaying a 404.
    try_files $uri $uri/ =404;
  }

  # pass PHP scripts to FastCGI server
  #
  location ~ \.php$ {
    include snippets/fastcgi-php.conf;
  
    # With php-fpm (or other unix sockets):
    fastcgi_pass unix:/run/php/php7.4-fpm.sock;
    # With php-cgi (or other tcp sockets):
    #fastcgi_pass 127.0.0.1:9000;
  }

  # deny access to .htaccess files, if Apache's document root
  # concurs with nginx's one
  #
  location ~ /\.ht {
    deny all;
  }
}


# Virtual Host configuration for example.com
#
# [...]

Get the code

$ sudo mkdir /opt/MMDVMDash
$ sudo chown pi /opt/MMDVMDash
$ git clone --recursive git@github.com:dg9vh/MMDVMHost-Websocketboard.git /opt/MMDVMDash

We saved the dashboard repository now in /opt/MMDVMDash.

Configuration

Open logtailer.ini, this should look something like this (shrinked together)

# file: "/opt/MMDVMDash/logtailer.ini"
[DEFAULT]
Host=0.0.0.0
Port=5678
Ssl=False
SslCert=/path/to/cert
SslKey=/path/to/keyfile
MaxLines=500
Filerotate=True
[MMDVMHost]
Logdir=/var/log/mmdvm/
Prefix=MMDVM
DMR_ID_Lookup=1
DMR_ID_LookupFile=/usr/local/etc/DMRIds.dat
DMR_ID_Reload_Time=1440
MMDVM_ini=/etc/MMDVM.ini
MMDVM_bin=/usr/local/bin/MMDVMHost
[DAPNETGateway]
Logdir=/var/log/mmdvm/
Prefix=DAPNETGateway
[ServiceMonitoring]
BinaryName1=MMDVMHost
BinaryName2=ircddbgatewayd
BinaryName3=YSFGateway
BinaryName4=timeserverd

Next, open /opt/MMDVMDash/html/js/config.js and modify it to your needs

// file: "/opt/MMDVMDash/html/js/config.js"
var config_struc_ver = 20210501.1;
var qrz = 1;
var debug = 0;
var warnlevel = 200;
var emergencylevel = 500;
var currtx = 1;
var lastheard = 2;
var localheard = 1;
var allheard = 1;
var qso = 1;
var dapnet = 0;
var sysinfo = 1;
var services = 1;
var about = 0;
var useClientTimezone = 1;
var showBMTGLink = 0;
var qrz_blacklist = [
"N0CALL",
]
var dashboard_blacklist = [
"MY0CALL",
]
var useDarkTheme = 0;
var customHeadlineText = ``;
var customText = ``;

Create and enable a system service

$ sudo cp systemd/logtailer.service /etc/systemd/system/
$ sudo systemctl daemon-reload
$ sudo systemctl enable --now logtailer.service

Enjoy the multi-mode hotspot

Finally, a few last words should be written. I've spent quite some time with my research about the tools needed for a hotspot. Most of us use Pi-Star and go with it. And that's fine, because Pi-Star is an awesome jack of all trades, but in this article I tried to explain my experiences that I learned when I created my lightweight hotspot that only runs programs that I really need.

You gain more control over the system tasks on your Raspberry Pi, but you loose some comfort functions. I always liked slim and lightweight systems since I learned about the linux world back in my school time. I went with Gentoo and fluxbox for some years and also used FreeBSD in combination with fluxbox on my older Lenovo T60 laptop.

So that's why I try to make my systems small and compact and I'm very happy with the result. I personally thought that I'd stuck on the D-STAR configuration because I've found so less information about that mode---specially it's configuration. But now it's working fine and I can say: it wasn't that hard (or abstract) as I thought before.