You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

790 lines
16 KiB

---
title: A slim D-STAR gateway on a Raspberry Pi 2
summary: I wrote down the installation of a forked DStarGateway with a slim
dashboard based on Javascript on a Raspberry Pi 2.
date: 2024-01-29T13:01:26+0100
#lastmod:
categories:
- amateur-radio
tags:
- archlinux
- dstar
- hotspot
- linux
- mmdvm
- raspberry-pi
# showBreadcrumbs: true
# showDate: false
# showReadingTime: false
# showWordCount: false
# showPagination: false
# feed_exclude: true
# site_exclude: true
# some help
#
# highlighting with highlights
#
# use table, as inline creates a padding around
# and it pushes the text more to the right side (end of screen)
#
# ~~~html {linenos=table,hl_lines="3-6"}
# ~~~html {linenos=inline,hl_lines="1,3-6"}
draft: true
---
## Installation of Archlinux
I usually setup any Raspberry Pi without screen and keyboard but I make use of
the [serial console](https://www.raspberrypi.com/documentation/computers/configuration.html#configuring-uarts).
This procedure is taken from
[archlinuxarm.org](https://archlinuxarm.org/platforms/armv7/broadcom/raspberry-pi-2)
-- a more detailed tutorial is shown there.
![Raspi 2 with wires connected to GPIO Pins GND, RXD and TXD](setup_console.jpg "I haven't changed a thing
of the initial configuration -- the serial console works just out of the box")
### Preparations (microSD card)
Partition the microSD card on your PC or laptop.
~~~console
$ sudo fdisk /dev/sda
~~~
~~~
Device Boot Start End Sectors Size Id Type
/dev/sda1 2048 411647 409600 200M c W95 FAT32 (LBA)
/dev/sda2 411648 15759359 15347712 7.3G 83 Linux
~~~
Format filesystems.
~~~console
$ sudo mkfs.vfat /dev/sda1
$ sudo mkfs.ext4 /dev/sda2
~~~
I am curerntly in `~/mnt`.
~~~console
$ mkdir boot root
$ sudo mount /dev/sda1 boot
$ sudo mount /dev/sda2 root
$ wget http://os.archlinuxarm.org/os/ArchLinuxARM-rpi-armv7-latest.tar.gz
$ sudo bsdtar -xpf ArchLinuxARM-rpi-armv7-latest.tar.gz -C root
$ sync
$ sudo mv root/boot/* boot/
$ sudo umount boot root
~~~
So, place the microSD card in the Raspberry Pi and boot it up (with the serial console connected).
### First start
There are the following two users pre-defined:
| Username | Password |
|------------| -----------|
| _root_ | _root_ |
| _alarm_ | _alarm_ |
I prefer my username as _dominic_, so I changed it:
~~~console
# usermod -l dominic -d /home/dominic -m alarm
# groupmod -n dominic alarm
~~~
{{< alert circle-info >}}
The user _alarm_ may come from **A**rch**L**inux **ARM**.
{{< /alert >}}
So the first real thing is upgrading the system. We start as this:
~~~console
# pacman-key --init
# pacman-key --populate archlinuxarm
# pacman -Syu
~~~
Some general system administration tasks, such as timezone setup network
setup etc...
I'm using NetworkManager on the Raspi so I install it
~~~console
# pacman -S networkmanager
# systemctl enable --now NetworkManager
# nmcli device wifi connect {network-ssid} --ask
~~~
Now we may login via ssh.
I had some problems with date and time, so a look at `systemd-timesyncd.service`,
`timedatectl status`, `timedatectl show-timesync` and `timedatectl timesync-status`
could be useful.
## Installation of DStarGateway
I prefer compiling as normal user so I login as _dominic_. We will need some packages.
~~~console
$ sudo pacman -S --needed base-devel wget boost man-db gtest bind
~~~
I hope I got all that we need, if you run into errors, just install the missing ones :wink:
~~~console
$ mkdir git && cd git
$ git clone https://github.com/F4FXL/DStarGateway.git
$ cd DStarGateway
$ make
~~~
This ran for 38 minutes -- I will not forget to run `make -j4` the next time :face_with_rolling_eyes:
You would now typically install the files but this is the part that made me stop for a while.
~~~console
$ sudo make install
~~~
It will break, but at least it installs the binary files into `/usr/local/bin`.
Whatever I was doing, it won't work automated. I'm not a developer, but to me this looks
like as if `make -C` enters the directory before it runs the top-level Makefile so the
`export ...` lines never get executed and the Makefiles in the sub-directories will never
know about them, I have to manually install the `Data` folder contents (AMBE files, Hostfiles).
Move to the `Data` directory and add the following line on top of the file:
~~~make
export DATA_DIR=/usr/local/share/dstargateway.d
~~~
Then run `sudo make install` within the `Data` directory again and all should be fine.
Also install the hostfiles (this will need the program _wget_).
~~~console
$ sudo make newhostfiles
~~~
Copy the systemd unit files to the right directory per hand:
~~~console
$ sudo cp debian/* /usr/lib/systemd/system/
~~~
{{< alert >}}
Inspect them because you may edit some paths.
{{< /alert >}}
Also have a look at the configuration files in `/usr/local/etc/`.
Enable the services, but I don't start them yet (except for a short test) because
the hotspot will connect to the DSTAR reflector but we can't talk or hear anything.
Once they are enabled, they will autostart at the next reboot.
To enable the services:
~~~console
$ sudo systemctl daemon-reload
$ sudo systemctl enable dstargateway.service
$ sudo systemctl enable dgwtimeserver.service
~~~
The second is only needed if you want time announcements.
## Installation of MMDVMHost
Also this requires special packages:
~~~console
$ sudo pacman -S libsamplerate
~~~
~~~console
$ git clone git@github.com:g4klx/MMDVMHost.git
$ cd MMDVMHost
$ make -j4
$ sudo make install-service
~~~
That would probably fail, but we can do it by hand.
Setup the user _mmdvm_:
~~~console
$ sudo useradd --user-group -M --system mmdvm --shell /bin/false
$ sudo usermod --groups uucp --append mmdvm
~~~
So we run the command one more time:
~~~console
$ sudo make install-service
~~~
Binaries are installed and the systemd unit files too.
Modify the configuration file `/etc/MMDVM.ini`.
Enable the service:
~~~console
$ sudo systemctl daemon-reload
$ sudo systemctl enable mmdvmhost.service
~~~
## Setup the UART
We can't start MMDVMHost right away (well, we can, but it will not work yet).
Enable the UART in `/boot/config.txt`:
~~~ini
enable_uart=1
~~~
Add this near the top or after `[All]`.
We need to disable the serial console because we need the UART at the GPIO pins
for our modem hardware.
Disable the serial console service:
~~~console
$ sudo systemctl disable serial-getty@ttyAMA0.service
~~~
Open `/boot/cmdline.txt` and remove `console=serial0,115200` from the line. Save
and reboot.
## Configuration
Make sure to check them before bringing up any service.
### DStarGateway
I removed unused configuration parts, you can leave them in your config, but I
want this code here as small as possible without loosing too much of information.
~~~ini
[Gateway]
type=hotspot
callsign=CALLSIGN
address=0.0.0.0
icomAddress=172.16.0.20
icomPort=20000
hbAddress=
hbPort=20010
latitude=0.0
longitude=0.0
description1=
description2=
url=
language=english_us
[ircddb_1]
enabled=true
hostname=ircv4.openquad.net
username=
password=
[ircddb_2]
enabled=false
# [...]
[ircddb_3]
enabled=false
# [...]
[ircddb_4]
enabled=false
# [...]
[Repeater_1]
enabled=true
band=E
callsign=CALLSIGN
address=
port=20011
type=hb
reflector=REF096 A
reflectorAtStartup=
reflectorReconnect=5
frequency=432.7625
offset=-0.0
rangeKm=20
latitude=0.0
longitude=0.0
agl=
description1=
description2=
url=
band1=
band2=
band3=
[Repeater_2]
enabled=false
# [...]
[Repeater_3]
enabled=false
# [...]
[Repeater_4]
enabled=false
# [...]
[APRS]
enabled=false
hostname=rotate.aprs2.net
port=14580
password=12345
positionSource=
[GPSD]
address=
port=
[Log]
path=/var/log/dstargateway/
fileRoot=
fileRotate=
fileLevel=
displayLevel=
[Paths]
data=/usr/local/share/dstargateway.d
[DExtra]
enabled=true
maxDongles=5
[DPlus]
enabled=true
maxDongles=5
login=
[DCS]
enabled=true
[XLX]
enabled=true
hostfileUrl=http://xlxapi.rlx.lu/api.php?do=GetXLXDMRMaster
[DRats]
enabled=false
[Remote]
enabled=false
port=4242
password=CHANGE_ME
[AccessControl]
whiteList=
blackList=
restrictList=
[Daemon]
daemon=false
pidfile=/var/run/dstargateway/dstargateway.pid
user=dstar
~~~
You can set `band=B` or `band=C` in `[Repeater_1]`. I have `E` because I sometimes
test a dual-hat hotspot which used to have `B` set and I've already setup `E` in my
DSTAR terminal settings on [regist.dstargateway.org](https://regist.dstargateway.org/).
### MMDVMHost
This would be a very long list, I removed things that I did not change from the example
config file. I also changed some values to not have a duplicate of my hotspot running
wild somewhere, so make sure you change all the options to match your own setup.
~~~ini
[General]
Callsign=CALLSIGN
Id={DMR_ID} # or CCS or whatever this is called
Timeout=180
Duplex=0
RFModeHang=10
NetModeHang=3
Display=None
Daemon=1
[Info]
RXFrequency=432762500
TXFrequency=432762500
Power=1
Latitude=0.0
Longitude=0.0
Height=0
Location=Home
Description=DSTAR Hotspot
URL=https://oe7drt.com
[Log]
DisplayLevel=0
FileLevel=2
FilePath=/var/log/mmdvm/
FileRoot=MMDVM
FileRotate=1
[CW Id]
Enable=0
Time=10
[DMR Id Lookup]
File=DMRIds.dat
Time=24
[NXDN Id Lookup]
File=NXDN.csv
Time=24
[Modem]
Protocol=uart
UARTPort=/dev/ttyAMA0
UARTSpeed=115200
TXInvert=1
RXInvert=0
PTTInvert=0
TXDelay=100
RXOffset=-75
TXOffset=-75
DMRDelay=0
RXLevel=50
TXLevel=50
RXDCOffset=0
TXDCOffset=0
RFLevel=100
RSSIMappingFile=/usr/local/etc/RSSI.dat
UseCOSAsLockout=0
Trace=0
Debug=0
[Transparent Data]
Enable=0
# [...]
[D-Star]
Enable=1
Module=E
SelfOnly=1
AckReply=1
AckTime=750
AckMessage=0
ErrorReply=1
RemoteGateway=0
WhiteList=
[DMR]
Enable=0
# [...]
[System Fusion]
Enable=0
# [...]
[P25]
Enable=0
# [...]
[NXDN]
Enable=0
# [...]
[M17]
Enable=0
# [...]
[FM]
Enable=0
# [...]
[AX.25]
Enable=0
# [...]
[D-Star Network]
Enable=1
LocalAddress=127.0.0.1
LocalPort=20011
GatewayAddress=127.0.0.1
GatewayPort=20010
Debug=0
[DMR Network]
Enable=0
# [...]
[System Fusion Network]
Enable=0
# [...]
[P25 Network]
Enable=0
# [...]
[NXDN Network]
Enable=0
# [...]
[M17 Network]
Enable=0
# [...]
[POCSAG Network]
Enable=0
# [...]
[FM Network]
Enable=0
# [...]
[AX.25 Network]
Enable=0
# [...]
~~~
~~~console
$ sudo cp /home/dominic/git/MMDVMHost/RSSI.dat /usr/local/etc/
~~~
### dgwtimeserver
~~~ini
[TimeServer]
callsign=CALLSIGN
address=
format=voice
language=english_us_2
interval=60
[Paths]
data=/usr/local/share/dstargateway.d/
[Repeater_1]
enabled=true
band=E
[Repeater_2]
enabled=false
band=
[Repeater_3]
enabled=false
band=
[Repeater_4]
enabled=false
band=
[Log]
path=/var/log/dstargateway/
fileRoot=
fileRotate=
fileLevel=
displayLevel=
[Daemon]
daemon=false
pidfile=/var/run/dstargateway/dstargateway.pid
user=dstar
~~~
## Install a dashboard
I will install the [dashboard from John Hays (K7VE)](https://github.com/johnhays/dsgwdashboard)
as my first look at it looked promising.
But: I will not install this as it is in his instructions, because I don't like
when these kind of applications (simple dashboards for example) have to be run
as the _root_ user. I will therefore create a new user called _dashboard_ who
will run the webserver later.
We need a few packages for this:
~~~console
$ sudo pacman -S nodejs npm
~~~
Create and impersonate our new user:
~~~console
$ sudo useradd --user-group -m --system dashboard --shell /bin/bash
$ sudo su - dashboard
~~~
Now we are the user _dashboard_ and we will install the dashboard:
~~~console
$ git@github.com:johnhays/dsgwdashboard.git
$ cd dsgwdashboard
$ node -v
$ npm install -save
~~~
We would now install some certificates to let the webserver be accessible
via HTTPS, but I maintain a reverse-proxy at my home which will take care
of all the https-connections.
Therefore I modify the `index.js` file according to the following patch:
~~~patch
diff --git a/index.js b/index.js
index 0c71092..502933e 100644
--- a/index.js
+++ b/index.js
@@ -1,4 +1,4 @@
-const https = require("https");
+const http = require("http");
const fs = require("fs");
const ini = require("ini");
const lineReader = require('line-reader');
@@ -32,12 +32,8 @@ updatelinks();
let serverPort = inifile.config.port;
-const server = https
+const server = http
.createServer(
- {
- key: fs.readFileSync("key.pem"),
- cert: fs.readFileSync("cert.pem"),
- },
app
)
.listen(serverPort, ()=>{
~~~
Modify the `dashboard.ini` file to change the port from 443 to 8443.
Why? Because I want to run the webserver as non-root user[^1]!
~~~ini
[config]
dgwconfig=/usr/local/etc/dstargateway.cfg
host=hotspot.oe7drt.net
port=8443
~~~
{{< alert circle-info >}}
This might be confusing now, the **actual host** above does not listen to port 8443 because
there is a reverse-proxy in-between (and actually a firewall/router too).
{{< /alert >}}
The actual path of this host and how it will be routed:
{{< mermaid >}}
%%{init: {"flowchart": {"htmlLabels": false}} }%%
graph LR;
A([Internet user]):::usr -- "`**HTTPS**`" -->B["`router/firewall
_hotspot.oe7drt.net_`"]:::fw;
B-- "`**HTTPS**`" -->C["`reverse-proxy
_proxy.lan_`"]:::rev;
C-- "`**HTTP**`" -->D["`hotspot dashboard
_hotspot.lan_`"]:::dash;
classDef usr stroke:#faa
classDef fw stroke:#f55
classDef rev stroke:#9f9
classDef dash stroke:#0f0
{{< /mermaid >}}
This configuration is now as slim as I could make, removing encryption on the dashboard
made it even better in terms of performance and maintainability as I don't have to
worry about the certificates on this host and no direct port-forwarding to this host
has been made.
I will now disable the shell for the _dashboard_ user because I won't need
to login as the _dashboard_ user again.
~~~console
$ sudo chsh -s /bin/false dashboard
~~~
[^1]: Ports below <kbd>1024</kbd> can only be used as the _root_ user. Those are socalled
[privileged ports](https://www.w3.org/Daemon/User/Installation/PrivilegedPorts.html).
To run the program as non-root user we need to set the port to something
above <kbd>1024</kbd>.
### Start the dashboard with systemd
John already provides a systemd unit file, we need to copy this to the
right directory.
~~~console
$ sudo cp /home/dashboard/dsgwdashboard/util/dsgwdashboard.service /usr/lib/systemd/system/
~~~
Edit the file, because John uses different paths than we do.
~~~systemd {hl_lines="7 9"}
[Unit]
Description=D-STAR Gateway Dashboard
After=network.target network-online.target
Wants=network-online.target
[Service]
User=dashboard
Type=simple
WorkingDirectory=/home/dashboard/dsgwdashboard
ExecStart=/usr/bin/node index.js
Restart=on-failure
RestartSec=5
StartLimitIntervalSec=60
StartLimitBurst=0
StandardOutput=syslog
StandardError=syslog
[Install]
WantedBy=multi-user.target
~~~
Enable and start the dashboard:
~~~console
$ sudo systemctl daemon-reload
$ sudo systemctl enable --now dsgwdashboard.service
~~~
## DSTAR Registration
A DSTAR registration is needed if you want your transmission to
be heard on original ICOM repeaters. Otherwise your transmission will
not be forwarded and you may be searching for errors...
I registered at <https://regist.dstargateway.org/> but there
is one important thing to add to the webui there: do not choose long
passwords (like those from a password manager) because it will get
cut off somewhere and it took me quite a while to realize that.
{{< alert skull-crossbones >}}
**I can't believe that there are still websites in 2024 that limit
the lenght of a password!**
{{< /alert >}}
This can be an indication, that our passwords are saved in **cleartext**.
{{< alert >}}
This is one reason to not use the same password on different websites/services.
{{< /alert >}}
For your information: 12 characters work -- I couldn't bring me back up to test more.
Many password-reset emails have been sent for this already so I couldn't be
bothered to investigate even more into that.
## Final words
So this note ends right here, hopefully this will be of any help to me in
the future or somebody that found it online.