You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
27 lines
1.3 KiB
27 lines
1.3 KiB
This a proof-of-concept Linux userspace driver to hardware-enable/-disable the touchpads on TongFang/Uniwill laptops. This will also trigger the disabled-led, formerly unfunctional under linux.
|
|
|
|
It syncs up with the software toggle in the gnome settings deamon.
|
|
|
|
It comes with some known disfuctionalities:
|
|
- only works on desktop evnironments using gsettings/gio
|
|
- does not work on loginscreen(gdm)
|
|
- needs to be started for every user seperatly
|
|
- every user needs write access to the /dev/hidraw* device for the touchpad (udev *.rules included)
|
|
- switching between 2 users is not detected (on next toggle the software and hardware disable will be in sync again however)
|
|
|
|
Author: Werner Sembach
|
|
|
|
Raw i2c communication with the touchpad for reference:
|
|
|
|
```
|
|
0x22 0x00 0x37 0x03 0x23 0x00 0x04 0x00 0x07 0x03
|
|
[^^ ^^] (?max?) length of report? in little endian
|
|
^ 2 bits reserved + report type
|
|
^ report id (defined by touchpad controller?
|
|
^ reserved
|
|
^ opcode (0x2 = GET_REPORT, 0x3 = SET_REPORT)
|
|
[^^ ^^ ^^ ^^ ^^] ?i2c-hid stuff?
|
|
^ ?report id again?
|
|
^^ report/payload: defined by touchpad controller? 0x03 enabled (0x02 auch, keine ahnung was das unterste bit tut), 0x00 disabled
|
|
```
|